Experimental Study on the Flexural Behavior of RC Beams Strengthened with Steel-Wire Continuous Basalt Fiber Composite Plates
Publication: Journal of Composites for Construction
Volume 17, Issue 2
Abstract
This paper examines a technique for flexurally strengthening reinforced concrete (RC) beams using newly developed steel-wire continuous basalt fiber composite plates (SBFCPs) that comprise steel wires and continuous basalt-fiber-reinforced polymer (BFRP) composites. The test parameters consist of the volumetric ratio of steel wires in the SBFCPs, the composite plate type, and anchoring measures. The test results demonstrate that the SBFCP-strengthened specimens performed better than the unstrengthened specimen with respect to load capacity and member stiffness. Further, the flexural cracks are distributed more closely and uniformly than in the unstrengthened specimen. The SBFCP-strengthened beams have competitive advantages, particularly with respect to their ductility and performance-cost ratio, in comparison with specimens strengthened with carbon-fiber-reinforced polymer (CFRP) materials. A parametric study demonstrates that the volumetric ratio of steel wires in the SBFCPs affects the load capacity and stiffness of specimens strengthened with SBFCPs. The results also indicate that anchorage by steel plates and bolts improves the load capacity and ductility of strengthened specimens.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors would like to acknowledge financial support from the National Basic Research Program of China (973 Program) (No. 2012CB026200), the National Science Foundation of China (No. 51078077) and the Western Communications Construction Scientific and Technological Project of China (No. 2011016). Supplementary support was provided to the first author by the Fok Ying-Tong Education Foundation of China (No. 122011).
References
Duthinh, D., and Starnes, M. (2004). “Strength and ductility of concrete beams reinforced with carbon fiber-reinforced polymer plates and steel.” J. Compos. Constr., 8(1), 59–69.
Ebead, U. (2011). “Hybrid externally bonded/mechanically fastened fiber-reinforced polymer for RC beam strengthening.” ACI Struct. J., 108(6), 669–678.
El-Mihilmy, M. T., and Tedesco, J. W. (2000). “Analysis of reinforced concrete beams strengthened with FRP laminates.” J. Struct. Eng., 126(6), 684–691.
Grace, N. F., Sayed, G. A., Soliman, A. K., and Saleh, K. R. (1999). “Strengthening reinforced concrete beams using fiber reinforced polymer (FRP) laminates.” ACI Struct. J., 96(5), 865–874.
Hosny, A., Shaheen, H., Abdelrahman, A., and Elafandy, T. (2006). “Performance of reinforced concrete beams strengthened by hybrid FRP laminates.” Cem. Concr. Compos., 28(10), 906–913.
Lee, T. K., Pan, A. D. E., and Ma, M. J. L. (2004). “Ductile design of reinforced concrete beams retrofitted with fiber reinforced polymer plates.” J. Compos. Constr., 8(6), 489–500.
Liu, S. T., Oehlers, D. J., and Seracino, R. (2007). “Study of intermediate crack debonding in adhesively plated beams.” J. Compos. Constr., 11(2), 175–183.
Meier, U. (2000). “Composite materials in bridge repair.” Appl. Compos. Mater., 7(2), 75–94.
Perera, R. (2004). “Prediction of the behavior of RC beams strengthened with FRP plates.” Comput. Mater. Contin., 1(2), 153–171.
Rahimi, H., and Hutchinson, A. (2001). “Concrete beams strengthened with externally bonded FRP plates.” J. Compos. Constr., 5(1), 44–56.
Ritchie, P. A., Thomas, D. A., Lu, L. W., and Connelly, G. M. (1991). “External reinforcement of concrete beams using fiber reinforced plastics.” ACI Struct. J., 88(4), 490–500.
Rosenboom, O., and Rizkalla, S. (2008). “Experimental study of intermediate crack debonding in FRP strengthened beams.” ACI Struct. J., 105(1), 41–50.
Saadatmanesh, H., and Ehsani, M. R. (1991). “RC beams strengthened with GFRP plates. I: Experimental study.” J. Struct. Eng., 117(11), 3417–3433.
Sharif, A., AI-Sulaimani, G. J., Basunbul, I. A., and Ghaleb, B. N. (1994). “Strengthening of initially loaded reinforced concrete beams using FRP plates.” ACI Struct. J., 91(2), 106–168.
Spadea, G., Bencardino, F., and Swamy, R. N. (1998). “Structural behavior of composite RC beams with externally bonded CFRP.” J. Compos. Constr., 2(3), 132–137.
Subedi, N. K., and Baglin, P. S. (1998). “External plate reinforcement for concrete beams.” J. Struct. Eng., 124(12), 1490–1495.
Taheri, F., Shahin, K., and Widiarsa, I. (2002). “On the parameters influencing the performance of reinforced concrete beams strengthened with FRP plates.” Compos. Struct., 58(2), 217–226.
Wu, G., Wang, H.-T., Wu, Z. S., Liu, H.-Y., and Ren, Y. (2012). “Experimental study on the fatigue behavior of steel beams strengthened with different fiber-reinforced composite plates.” J. Compos. Constr., 16(2), 127–137.
Wu, G., Wu, Z. S., Luo, Y. B., Sun, Z. Y., and Hu, X. Q. (2010a). “Mechanical properties of steel-FRP composite bar under uniaxial and cyclic tensile loads.” J. Mater. Civ. Eng., 22(10), 1056–1066.
Wu, Y. F., Yan, J. H., Zhou, Y. W., and Xiao, Y. (2010b). “Ultimate strength of reinforced concrete beams retrofitted with hybrid bonded fiber-reinforced polymer.” ACI Struct. J., 107(4), 451–460.
Zhao, X. L., and Zhang, L. (2007). “State-of-the-art review on FRP strengthened steel structures.” Eng. Struct., 29(8), 1808–1823.
Information & Authors
Information
Published In
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Feb 15, 2012
Accepted: Aug 16, 2012
Published online: Aug 24, 2012
Published in print: Apr 1, 2013
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.