Shear Strength of Fiber-Reinforced Polymer Reinforced Concrete Beams Subject to Unsymmetric Loading
Publication: Journal of Composites for Construction
Volume 15, Issue 4
Abstract
This study is concerned with the determination of the effects of shear span-to-depth ratio () and beam depth, or size, on the concrete contribution to the shear resistance of beams longitudinally reinforced with carbon fiber-reinforced polymer (CFRP) bars. One of the distinguishing features of the study is the unsymmetrical nature of the applied load, which creates two distinct ratios in the same beam and allows the effect of the ratio on shear strength to be clearly seen. Six simply supported large size CFRP reinforced concrete beams without shear reinforcement were tested, each under a single concentrated load. The test variables were the ratio, varying from 1.0–11.5, and the beam depth varying from 200–500 mm. All the beams failed in shear, but the failure load and location for some of these beams could not be predicted by the shear design recommendations of American Concrete Institute (ACI) Committee 440. The reason is that these recommendations do not account for the effects of and beam size on shear strength. Suggestions are made for the inclusion of these parameters in the shear design equations.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors would like to thank undergraduate students Meaghan Henry, Mehdi Ebrahimpour, Alain-Philippe Beauger, and Alessandro Qualizza at Carleton University for their assistance with the construction and testing of the beams in this investigation.
References
AASHTO. (2007). LRFD Bridge design specifications, 4th Ed., Washington, DC.
American Concrete Institute (ACI) Committee 440. (2006). “Guide for the design and construction of concrete reinforced with FRP bars.” ACI 440.1R-06, Farmington Hills, MI.
American Concrete Institute (ACI) Committee 318. (2008). “Building code requirements for structural concrete.” ACI-318-08, Farmington Hills, MI.
ASCE-ACI Committee 445 on Shear Torsion. (1998). “Recent approaches to shear design of structural concrete.” J. Struct. Eng., 124(12), 1375–1417.
Bazant, Z., and Kim, K. (1984). “Size effect in shear failure of longitudinally reinforced beams.” ACI Struct. J., 81(5), 456–468.
Bentz, E. C., and Collins, M. P. (2006). “Development of the 2004 CSA A23.3 shear provisions for reinforced concrete.” Can. J. Civ. Eng., 33(5), 521–534.
Bentz, E. C., Vecchio, F. J., and Collins, M. P. (2006). “The simplified modified compression field theory for calculating the shear strength of reinforced concrete elements.” ACI Struct. J., 103(4), 614–624.
Canadian Standards Association (CSA). (1994). “Design of concrete structures.” CSA A23.3-94, Rexdale, Ontario, Canada.
Canadian Standards Association (CSA). (2002). “Design and construction of building components with fibre reinforced polymers.” CSA S806-02, Rexdale, Ontario, Canada.
Canadian Standards Association (CSA). (2004). “Design of concrete structures.” CSA A23.3-04, Rexdale, Ontario, Canada.
Canadian Standards Association (CSA). (2006). “Canadian highway bridge design code.” CSA S6-06, Rexdale, Ontario, Canada.
Comité Européen de Normalisation (CEN). (2003). “Eurocode 8 (EC8): Design of structures for earthquake resistance–Part 1: General rules, seismic actions and rules for buildings.” prEN 1998-1, Brussels, Belgium.
Collins, M., and Kuchma, D. (1999). “How safe are our large lightly reinforced beams, slabs, and footings?” ACI Struct. J., 96(4), 482–494.
El-Sayed, A. K., and Benmokrane, B. (2008). “Evaluation of the new Canadian highway bridge design code shear provisions for concrete beams with fiber-reinforced polymer reinforcement.” Can. J. Civ. Eng., 35(6), 609–623.
El-Sayed, A. K., El-Salakawy, E., and Benmokrane, B. (2006a). “Shear capacity of high-strength concrete beams reinforced with FRP bars.” ACI Struct. J., 103(3), 383–389.
El-Sayed, A. K., El-Salakawy, E., and Benmokrane, B. (2006b). “Shear strength of FRP-reinforced concrete beams without transverse reinforcement.” ACI Struct. J., 103(2), 235–243.
Fico, R., Prota, A., and Manfredi, G. (2008). “Assessment of Eurocode-like design equations for the shear capacity of FRP RC members.” Composites, Part B, 39(5), 792–806.
Hoult, N. A., Sherwood, E. G., Bentz, E. C., and Collins, M. P. (2008). “Does the use of FRP reinforcement change the one-way shear behavior of reinforced concrete slabs?” J. Compos. Constr., 12(2), 125–133.
Japan Society of Civil Engineers (JSCE). (1997). “Recommendation for design and construction of concrete structures using continuous fibre reinforcing materials.” CLI31-1, Tokyo.
Kani, G. (1967). “How safe are our large reinforced concrete beams?” J. Am. Concr. Inst., 64(3), 128–141.
Khuntia, M., and Stojadinovic, B. (2001). “Shear strength of reinforced concrete beams without transverse reinforcement.” ACI Struct. J., 98(5), 648–656.
MacGregor, J. G., and Bartlett, F. M. (2000). Reinforced concrete: Mechanics and design, 1st Canadian Ed.,Prentice-Hall, Scarborough, Ontario, Canada.
MacGregor, J. G., and Wight, J. K. (2005). Reinforced concrete: Mechanics and design, 4th Ed., Prentice-Hall, Upper Saddle River, NJ.
Matta, F., Nanni, A., Galati, N., and Mosele, F. (2007). “Size effect on shear strength of concrete beams reinforced with FRP bars.” Proc., 6th Int. Conf. on Fracture Mechanics of Concrete and Concrete Structures, Vol. 2, Balkema/Taylor and Francis, Catania, Italy, 1077–1084.
National Research Council. (2006). “Guide for the design and construction of concrete structures reinforced with fiber-reinforced polymer bars.” CNR-DT 203, Rome.
Omeman, Z., Nehdi, M., and El Chabib, H. (2008). “Experimental study on shear behaviour of CFRP-reinforced concrete short beams.” Can. J. Civ. Eng., 35(1), 1–10.
Razaqpur, A. G., Isgor, B. O., Greenaway, S., and Selley, A. (2004). “Concrete contribution to the shear resistance of fiber reinforced polymer reinforced concrete members.” J. Compos. Constr., 8(5), 452–460.
Razaqpur, A. G., and Isgor, O. B. (2006). “Proposed shear deign method for FRP-reinforced concrete members without stirrups.” ACI Struct. J., 103(1), 93–102.
Razaqpur, A. G., and Spadea, S. (2010). “Resistenza a taglio di elementi di calcestruzzzo reinforzatti e staffe di FRP.” Proc., AIAS 2010, 39th National Congress of Italian Association of Stress Analysis, Calabria, Italy.
Shioya, T. (1989). “Shear properties of large reinforced concrete members.” Special Rep. No. 25, Institute of Technology, Shimizu Corporation, Tokyo.
Steiner, S., El-Sayed, A., Benmokrane, B., Matta, F., and Nanni, A. (2008). “Shear strength of large size concrete beams reinforced with glass FRP bars.” 5th Int. Conf. on Advanced Composite Materials in Bridges and Structures, Winnipeg, Manitoba, Canada.
Tureyen, A., and Frosch, R. J. (2002). “Shear tests of FRP-reinforced beams without stirrups.” ACI Struct. J., 99(4), 427–434.
Vecchio, F. J., and Collins, M. P. (1986). “The modified compression field theory for reinforced concrete elements subjected to shear.” J. Am. Concr. Inst., 83(2), 219–231.
Zsutty, T. C. (1968). “Beam shear strength prediction by analysis of existing data.” ACI Struct. J., 65(11), 943–951.
Information & Authors
Information
Published In
Copyright
© 2011 American Society of Civil Engineers.
History
Received: May 18, 2010
Published online: Oct 1, 2010
Accepted: Oct 19, 2010
Published in print: Aug 1, 2011
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.