Constructional Safety-Based Cost Optimization for the Buckling–Anchorage System of Cantilever Casting Concrete Arch Bridges
Publication: Journal of Bridge Engineering
Volume 27, Issue 5
Abstract
The buckling–anchorage system (BAS) is critical in the construction of cantilever casting concrete arch bridges. However, due to the limitations of the anchor positions, the BAS always needs a trade-off between material cost and construction safety. This paper proposes a cost optimization method for BAS while considering the safety requirements of the structure during the erection process. The proposed framework couples particle swarm optimization with the numerical simulation of the erection process. The optimization model considers the height of the pylon and the anchorage interval of the buckle cables as design variables with constructional safety constraints. The internal force balanced method is utilized to determine the anchorage–buckling cable forces to reduce the structural analysis cost of the optimization. The numerical investigation based on a real arch bridge demonstrates the feasibility of the proposed approach and shows valuable suggestions to the design of BAS for similar applications.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This work was supported by the National Natural Science Foundation of China (Grant Nos. 52078230, 51408249, and 51708436).
References
Arellano, H., D. Tolentino, and R. Gómez. 2019. “Optimum criss crossing cables in multi-span cable-stayed bridges using genetic algorithms.” KSCE J. Civ. Eng. 23 (2): 719–728. https://doi.org/10.1007/s12205-018-5736-2.
Au, F. T. K., J. J. Wang, and G. D. Liu. 2003. “Construction control of reinforced concrete arch bridges.” J. Bridge Eng. 8 (1): 39–45. https://doi.org/10.1061/(ASCE)1084-0702(2003)8:1(39).
Cao, H. Y., X. D. Qian, Z. J. Chen, and H. P. Zhu. 2017. “Layout and size optimization of suspension bridges based on coupled modelling approach and enhanced particle swarm optimization.” Eng. Struct. 146: 170–183. https://doi.org/10.1016/j.engstruct.2017.05.048.
Chen, Z. J., H. Y. Cao, K. Ye, H. P. Zhu, and S. Li. 2015. “Improved particle swarm optimization-based form-finding method for suspension bridge installation analysis.” J. Comput. Civil Eng. 29 (3): 04014047. https://doi.org/10.1061/(ASCE)CP.1943-5487.0000354.
Desmond, J. H., and J. H. Nicholas. 2017. MATLAB guide. 3rd ed. Philadelphia: SIAM. Accessed July 5, 2021. https://www.maths.manchester.ac.uk/∼higham/mg/.
Elrehim, M. Z. A., M. A. Eid, and M. G. Sayed. 2019. “Structural optimization of concrete arch bridges using genetic algorithms.” Ain Shams Eng. J. 10 (3): 507–516. https://doi.org/10.1016/j.asej.2019.01.005.
Ernst, H. J. 1965. “Der E-modul von seilen unter berueck-sichtigung des durchhanges.” Der Bauingenieur 40 (2): 52–55. Accessed January 9, 2020. https://www.researchgate.net/publication/245871132_Der_EModul_von_Seilen_unter_Bermeicksichtigung_des_Durchhngens.
Farshchin, M., C. V. Camp, and M. Maniat. 2016. “Multi-class teaching–learning-based optimization for truss design with frequency constraints.” Eng. Struct. 106: 355–369. https://doi.org/10.1016/j.engstruct.2015.10.039.
García-Segura, T., and V. Yepes. 2016. “Multiobjective optimization of post-tensioned concrete box-girder road bridges considering cost, CO2 emissions, and safety.” Eng. Struct. 125: 325–336. https://doi.org/10.1016/j.engstruct.2016.07.012.
Han, H. J., J. P. Guo, J. J. Zhang, and Y. Sun. 2020. “Technical advances of temporary facilities for the failure prevention of large-span cantilever casting construction of mountainous concrete box-type arch bridges.” Adv. Civ. Eng. 2020: 6412613. https://doi.org/10.1155/2020/6412613.
Hassan, M. M., A. A. El Damatty, and A. O. Nassef. 2015. “Database for the optimum design of semi-fan composite cable-stayed bridges based on genetic algorithms.” Struct. Infrastruct. Eng. 11 (8): 1054–1068. https://doi.org/10.1080/15732479.2014.931976.
He, W., W. G. Zhou, and J. C. Tran. 2015. “Study of optimization fastening stay forces for arch bridge constructed by cantilever casting.” [In Chinese.] Bridge Constr 45 (3): 32–36. Accessed August 9, 2020. https://kns.cnki.net/kcms/detail/detail.aspx?DBCode=CJFD&DBName=CJFDLAST2015&fileName=QLJS201503010.
Kaveh, A., M. Maniat, and M. Arab Naeini. 2016. “Cost optimum design of post-tensioned concrete bridges using a modified colliding bodies optimization algorithm.” Adv. Eng. Software 98: 12–22. https://doi.org/10.1016/j.advengsoft.2016.03.003.
Kim, H.-K., M.-J. Lee, and S.-P. Chang. 2006. “Determination of hanger installation procedure for a self-anchored suspension bridge.” Eng. Struct. 28 (7): 959–976. https://doi.org/10.1016/j.engstruct.2005.10.019.
Li, L., Z. Huang, F. Liu, and Q. H. Wu. 2007. “A heuristic particle swarm optimizer for optimization of pin connected structures.” Comput. Struct. 85: 340–349. https://doi.org/10.1016/j.compstruc.2006.11.020.
Li, X. B. 2008. “Research on the cantilever casting construction control and model test of large span reinforced concrete arch bridges.” [In Chinese.] Ph.D. thesis, Chengdu, Southwest Jiaotong University. Accessed August 9, 2020. http://d.wanfangdata.com.cn/thesis/Y1347421.
Lozano-Galant, J. A., X. Dong, I. Payá-Zaforteza, and J. Turmo. 2013. “Direct simulation of the tensioning process of cable-stayed bridges.” Comput Struct 121: 64–75. https://doi.org/10.1016/j.compstruc.2013.03.010.
Lozano-Galant, J. A., I. Payá-Zaforteza, D. Xu, and J. Turmo. 2012. “Forward algorithm for the construction control of cable-stayed bridges built on temporary supports.” Eng. Struct. 40 (7): 119–130. https://doi.org/10.1016/j.engstruct.2012.02.022.
Luo, Y. M. 2016. “Research on the construction technology of cantilever casting with buckle cable system based on the main arch of Yelanghu Bridge.” [In Chinese.] Ph.D. thesis, Chongqing Jiaotong Univ. Accessed August 9, 2020. http://d.wanfangdata.com.cn/thesis/Y3046736.
Lute, V., A. Upadhyay, and K. K. Singh. 2009. “Computationally efficient analysis of cable-stayed bridge for GA-based optimization.” Eng. Appl. Artif. Intell. 22 (4): 750–758. https://doi.org/10.1016/j.engappai.2009.04.001.
Martí, J. V., and F. González-Vidosa. 2010. “Design of prestressed concrete precast pedestrian bridges by heuristic optimization.” Adv. Eng. Software 41 (7): 916–922. https://doi.org/10.1016/j.advengsoft.2010.05.003.
Martínez, F. J., F. González-Vidosa, A. Hospitaler, A. Hospitaler, and J. Alcalá. 2011. “Design of tall bridge piers by ant colony optimization.” Eng. Struct. 33 (8): 2320–2329. https://doi.org/10.1016/j.engstruct.2011.04.005.
Martínez, F. J., F. González-Vidosa, A. Hospitaler, and V. Yepes. 2010. “Heuristic optimization of RC bridge piers with rectangular hollow sections.” Comput. Struct. 88 (5): 375–386. https://doi.org/10.1016/j.compstruc.2009.11.009.
Martins, A. M. B., L. M. C. Simões, and J. H. J. O. Negrão. 2016a. “Optimum design of concrete cable-stayed bridges.” Eng. Optim. 48 (5): 772–791. https://doi.org/10.1080/0305215X.2015.1057057.
Martins, A. M. B., L. M. C. Simões, and J. H. J. O. Negrão. 2016b. “Optimum design of concrete cable-stayed bridges with prestressed decks.” Int. J. Comput. Methods Eng. Sci. Mech. 17 (5-6): 339–349. https://doi.org/10.1080/15502287.2016.1231237.
Martins, A. M. B., L. M. C. Simões, and J. H. J. O. Negrão. 2019. “Optimization of concrete cable-stayed bridges under seismic action.” Comput. Struct. 222: 36–47. https://doi.org/10.1016/j.compstruc.2019.06.008.
Ministry of Transportation. 2011. Technical specification for construction of highway bridge and culverts. JTG/T F50-20011. [In Chinese.] Beijing: China Communications Press. Accessed August 9, 2020. https://www.doc88.com/p-430722017500.html.
Ministry of Transportation. 2018. Specifications for design of highway reinforced concrete and prestressed concrete bridges and culverts. JTG 3362-2018. [In Chinese.] Beijing: China Communications Press. http://www.doc88.com/p-0184898064523.html
Moaveni, S. 2008. Finite element analysis: Theory and application with ANSYS. London: Pearson Prentice Hall. Accessed January 9, 2020. http://www.doc88.com/p-7798622599618.html.
Pedro, R. L., J. Demarche, L. F. F. Miguel, and R. H. Lopez. 2017. “An efficient approach for the optimization of simply supported steel–concrete composite I-girder bridges.” Adv. Eng. Software 112: 31–45. https://doi.org/10.1016/j.advengsoft.2017.06.009.
Salonga, J., and P. Gauvreau. 2014. “Comparative study of the proportions, form, and efficiency of concrete arch bridges.” J. Bridge Eng. 19 (3): 04013010. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000537.
Simões, L. M. C., and J. H. O. Negrão. 1994. “Sizing and geometry optimization of cable-stayed bridges.” Comput. Struct. 52 (2): 309–321. https://doi.org/10.1016/0045-7949(94)90283-6.
Sun, Y., H.-P. Zhu, and D. Xu. 2016. “A specific rod model based efficient analysis and design of hanger installation for self-anchored suspension bridges with 3D curved cables.” Eng. Struct. 110: 184–208. https://doi.org/10.1016/j.engstruct.2015.11.040.
Wang, X. M., D. M. Frangopol, Y. Dong, and X. M. Lei. 2018b. “Novel technique for configuration transformation of 3D curved cables of suspension bridges: Application to the Dongtiao river bridge.” J. Perform. Constr. Facil 32 (4): 04018045. https://doi.org/10.1061/(ASCE)CF.1943-5509.0001189.
Wang, X. M., C. S. Wang, M. F. Zhang, Y. X. Xu, and X. M. Lei. 2018a. “Innovative design and construction process for a self-anchored suspension and cable-stayed cooperation bridge in China.” Structural Engineering International 28 (2): 178–184. https://doi.org/10.1080/10168664.2018.1453760.
Wang, X. M., H. Wang, Y. Sun, Y. Liu, Y. Liu, P. Liang, and Y. Bai. 2022. “Fault-tolerant interval inversion for accelerated bridge construction based on geometric nonlinear redundancy of cable system.” Autom. Constr. 134: 104093. https://doi.org/10.1016/j.autcon.2021.104093.
Wang, X. M., H. Wang, Y. Sun, X. Y. Mao, and S. P. Tang. 2020. “Process-independent construction stage analysis of self-anchored suspension bridges.” Autom. Constr. 117: 103227. https://doi.org/10.1016/j.autcon.2020.103227.
Yang, J., S. X. Zhou, and H. J. Han. 2015. Cantilever casting concrete arch bridge design and construction technology. [In Chinese.] Beijing, China: Communications Press. Accessed August 9, 2020. http://218.193.121.100/opac_two/search2/s_detail.jsp?sid=01h0606388.
Zhang, W.-M., J.-Q. Chang, and G.-M. Tian. 2022. “FEM-based shape-finding and force-assessment of suspension bridges via completed loop adjustment.” J. Bridge Eng. 27 (1): 04021098. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001804.
Zhou, C. 2013. “The research on optimization of design parameters and closure key technology for reinforced concrete arch bridge with cantilever cast method.” [In Chinese.] Ph.D. thesis, Changsha, Changsha University of Science and Technology. Accessed August 9, 2020. http://d.wanfangdata.com.cn/thesis/Y2306605n.
Information & Authors
Information
Published In
Copyright
© 2022 American Society of Civil Engineers.
History
Received: May 27, 2021
Accepted: Jan 8, 2022
Published online: Mar 10, 2022
Published in print: May 1, 2022
Discussion open until: Aug 10, 2022
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.