Corrosion Risk of Using Stainless Steel Bolts for A1010 Steel Bridge Girders
Publication: Journal of Bridge Engineering
Volume 26, Issue 2
Abstract
This experimental study evaluates the galvanic corrosion risk between stainless steel bolts and ASTM A1010 steel bridge girders. Two stainless steel structural bolts, ASTM A320 B8 Class 2 and A193 B6 stainless steel bolts, are studied, because they are currently deemed to be compatible with, and recommended for use in new A1010 steel bridge girders. In the electrochemical experiments, the galvanic coupling current and potential are obtained in aerated salt solutions that simulate chloride-laden environments for A1010 steel bridges. The results show that B6 stainless steel might not be adequate in corrosive environments, because it was found to suffer severe pitting corrosion, and the galvanic corrosion risk of using B8 bolts with A1010 steel was found to be negligible. This finding will be further validated by the visual examinations of bolted A1010 steel plates in salt spray testing and confirmed by the pitting corrosion of B6 washers used in an A1010 bridge after 1 year of service. This study demonstrates that the galvanic corrosion risk has to be studied through properly designed corrosion experiments, and deductions from conventional knowledge of the composition of materials and their corrosion resistance is not sufficient to understand the actual galvanic corrosion risk of dissimilar metals in bridge applications.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors acknowledge Mr. D. Lai at the Ministry of Transportation of Ontario for his support and technical exchange for this research and Mr. Bruce Baldock at National Research Council Canada for his technical support in the experiments.
References
ArcelorMittal. 2019. “Duracorr®/A1010: Bridge applications and fabrication guidelines.” Accessed September 23, 2019. https://usa.arcelormittal.com/∼/media/Files/A/Arcelormittal-USA-V2/what-we-do/steel-products/plate-products/Duracorr-Bridge.pdf.
ASTM. 2017. Standard specification for alloy-steel and stainless steel bolting for high temperature or high pressure service and other special purpose applications. ASTM A193/A193M-17. West Conshohocken, PA: ASTM.
ASTM. 2018a. Standard practice for operating salt spray (fog) apparatus. ASTM B117-18. West Conshohocken, PA: ASTM.
ASTM. 2018b. Standard specification for alloy-steel and stainless steel bolting for low-temperature service. ASTM A320/A320M-18. West Conshohocken, PA: ASTM.
ASTM. 2018c. Standard specification for high strength structural bolts and assemblies, steel and alloy steel, heat treated, inch dimensions 120 ksi and 150 ksi minimum tensile strength, and metric dimensions 830 MPa and 1040 MPa minimum tensile strength. ASTM F3125/F3125M-18. West Conshohocken, PA: ASTM.
ASTM. 2018d. Standard specification for higher-strength martensitic stainless steel plate, sheet, and strip. ASTM A1010/A1010M-13. West Conshohocken, PA: ASTM.
ASTM. 2018e. Standard specification for structural steel for bridges. ASTM A709/A709M-18. West Conshohocken, PA: ASTM.
ASTM. 2019. Standard guide for conducting and evaluating galvanic corrosion tests in electrolytes. ASTM G71-81. West Conshohocken, PA: ASTM.
Bouyssoux, G., M. Romand, H. D. Polaschegg, and J. T. Calow. 1977. “XPS and AES studies of anodic passive films grown on chromium electrodes in sulphuric acid baths.” J. Electron. Spectrosc. Relat. Phenom. 11 (2): 185–196. https://doi.org/10.1016/0368-2048(77)85109-8.
Coomarasamy, A., D. Lai, F. Pianca, T. Turi, S. Ramamurthy, B. Kobe, M. J. Walzak, and J. Sawicki. 2008. “Analysis of corrosion products formed on some of Ontario’s weathering steel bridges.” In Corrosion 2008. 0819910–0819927. Houston, TX: NACE International.
Ebrahimi, N., J. Zhang, B. Baldock, and D. Lai. 2018. “Galvanic corrosion risk assessment of bolt materials in contact with ASTM A1010 steel bridges.” In Corrosion 2018. Paper No. NACE-2018-10615. Houston, TX: NACE International.
Fletcher, F. B., A. D. Wilson, S. J, J. N. Kilpatrick, T. Mlcoch, and J. Wrysinski. 2006. “Stainless steel for accelerated bridge construction.” Corrosion 10 (2): 2–7.
Groshek, I. G. 2017. “Corrosion behaviours of ASTM A1010 stainless steel for application in bridge components.” Virginia Polytechnic Institute and State University. Accessed May 21, 2020. https://pdfs.semanticscholar.org/a251/60e9c5f6188100748c94f83065558f075ffb.pdf.
Mansfeld, F. 1971. “Area relationships in galvanic corrosion.” Corrosion 27 (10): 436–442. https://doi.org/10.5006/0010-9312-27.10.436.
Mishra, A. K., and G. S. Frankel. 2008. “Crevice corrosion repassivation of alloy 22 in aggressive environments.” Corrosion 64 (11): 836–844. https://doi.org/10.5006/1.3279917.
Seradj, H. 2015. “Oregon’s experience with ASTM A1010.” In Transportation Research Board 94th Annual Meeting, 1–12. Washington, DC: Transportation Research Board.
Virmani, Y. P. 2009. Improved corrosion resistant steel for highway bridge construction knowledge-based design. Publication No. FHWA-HRT-09-053. Washington, DC: Federal Highway Administration.
Zhang, J., N. Ebrahimi, and D. Lai. 2019. “Galvanic corrosion risk of using galvanized A325 bolts in corrosion-resistant steel bridges.” J. Bridge Eng. 24 (6): 06019001. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001395.
Information & Authors
Information
Published In
Copyright
Crown Copyright © 2020 Published by American Society of Civil Engineers.
History
Received: Oct 7, 2019
Accepted: Sep 4, 2020
Published online: Dec 2, 2020
Published in print: Feb 1, 2021
Discussion open until: May 2, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.