Multi-Cross-Reference Method for Highway-Bridge Damage Identification Based on Long-Gauge Fiber Bragg-Grating Sensors
Publication: Journal of Bridge Engineering
Volume 25, Issue 6
Abstract
Highway bridges are vital infrastructure engineering whose safety severely influences the safety and stability of society. Damage identification, as the core part of structural health monitoring, plays an essential role in highway-bridge maintenance to help detect potential damage. There have been many studies conducted, with various damage identification methods proposed. However, there are still several problems with the durability of sensors and the reliability of methods, such as the issue of false alarm. Under this background, this paper proposed a multi-cross-reference method for highway-bridge damage identification method utilizing long-gauge fiber Bragg-grating (FBG) sensors. Through several numerical simulations and on-site testing, its feasibility under various conditions was verified. The results demonstrated that through this method the location of damage can be accurately identified with error of less than 5% in identified damage extent.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors would like to acknowledge financial support from the National Natural Science Foundation of China (Nos. 51525801, 51708106) and the Fundamental Research Funds for the Central Universities (No. 2242017k30002).
References
Abdel-Jaber, H., and B. Glisic. 2019. “Monitoring of long-term prestress losses in prestressed concrete structures using fiber optic sensors.” Struct. Health Monit. 18 (1): 254–269.
Aktan, A. E., and F. N. Catbas. 2002. “Condition and damage assessment: Issues and some promising indices.” J. Struct. Eng. 128 (8): 1026–1036. https://doi.org/10.1061/(ASCE)0733-9445(2002)128:8(1026).
An, Y. K., H. J. Lim, K. K. Min, J. Y. Yang, H. Sohn, and C. G. Lee. 2014. “Application of local reference-free damage detection techniques to in situ bridges.” J. Struct. Eng. 140 (3): 04013069. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000846.
Bandara, R. P., T. H. T. Chan, and D. P. Thambiratnam. 2014. “Frequency response function based damage identification using principal component analysis and pattern recognition technique.” Eng. Struct. 66: 116–128.
Cardini, A. J., and J. T. DeWolf. 2009. “Long-term structural health monitoring of a multi-girder steel composite bridge using strain data.” Struct. Health Monit. 8 (1): 47–58.
Catbas, F. N., H. B. Gokce, and M. Gul. 2012. “Nonparametric analysis of structural health monitoring data for identification and localization of changes: Concept, lab, and real-life studies.” Struct. Health Monit. 11 (5): 613–626.
Chen, C. S., Y. F. Ma, D. H. Yan, and Z. L. Li. 2020. “Coupled nonlinear and time-dependent analysis for long span cable-stayed bridges.” Struct. Infrastruct. Eng. https://doi.org/10.1080/15732479.2020.1712437.
Chen, S.-Z., G. Wu, and D.-C. Feng. 2019a. “Development of a bridge weigh-in-motion method considering the presence of multiple vehicles.” Eng. Struct. 191: 724–739.
Chen, S.-Z., G. Wu, and D.-C. Feng. 2019b. “Damage detection of highway bridges based on long-gauge strain response under stochastic traffic flow.” Mech. Syst. Signal Proc. 127: 551–572.
Chen, S. Z., G. Wu, D. C. Feng, and L. Zhang. 2018. “Development of a bridge weigh-in-motion system based on long-gauge fiber Bragg grating sensors.” J. Bridge Eng. 23 (9): 04018063. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001283.
Chen, S.-Z., G. Wu, and T. Xing. 2017a. “Deflection monitoring for a box girder based on a modified conjugate beam method.” Smart Mater. Struct. 26 (8): 085034.
Chen, S.-Z., G. Wu, T. Xing, and D.-C. Feng. 2017b. “Prestressing force monitoring method for a box girder through distributed long-gauge FBG sensors.” Smart Mater. Struct. 27 (1): 015015.
Curadelli, R. O., J. D. Riera, D. Ambrosini, and M. G. Amani. 2008. “Damage detection by means of structural damping identification.” Eng. Struct. 30 (12): 3497–3504.
Deng, L., and C. S. Cai. 2007. “Applications of fiber optic sensors in civil engineering.” Struct. Eng. Mech. 25 (5): 577–596.
Deng, L., W. Wang, and Y. Yu. 2015. “State-of-the-art review on the causes and mechanisms of bridge collapse.” J. Perform. Constr. Facil. 30 (2): 04015005. https://doi.org/10.1061/(ASCE)CF.1943-5509.0000731.
Doebling, S. W., C. R. Farrar, and M. B. Prime. 1998. “A summary review of vibration-based damage identification methods.” Shock Vib. Dig. 30 (2): 91–105.
Feng, D. C., X. D. Ren, and J. Li. 2016. “Implicit gradient delocalization method for force-based frame element.” J. Struct. Eng. 142 (2): 04015122. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001397.
Feng, M. Q., D. K. Kim, J. H. Yi, and Y. B. Chen. 2004. “Baseline models for bridge performance monitoring.” J. Eng. Mech. 130 (5): 562–569. https://doi.org/10.1061/(ASCE)0733-9399(2004)130:5(562).
Glisic, B., and D. Inaudi. 2012. “Development of method for in-service crack detection based on distributed fiber optic sensors.” Struct. Health Monit. 11 (2): 161–171.
Guo, Z. Z., Y. F. Ma, L. Wang, J. R. Zhang, and I. E. Harik. Forthcoming. “Corrosion fatigue crack propagation mechanism of high strength steel bar in various environments.” J. Mater. Civil Eng. https://doi.org/10.1061/(ASCE)MT.1943-5533.0003165.
He, W., L. Deng, H. Shi, S. C. Cai, and Y. Yu. 2017a. “Novel virtual simply supported beam method for detecting the speed and axles of moving vehicles on bridges.” J. Bridge Eng. 22 (4): 04016141. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001019.
He, W.-Y., J. He, and W.-X. Ren. 2018. “Damage localization of beam structures using mode shape extracted from moving vehicle response.” Measurement 121: 276–285.
He, W.-Y., W.-X. Ren, and S. Y. Zhu. 2017b. “Baseline-free damage localization method for statically determinate beam structures using dual-type response induced by quasi-static moving load.” J. Sound Vib. 400: 58–70.
Hong, W., Y. Cao, and Z. S. Wu. 2016. “Strain-based damage-assessment method for bridges under moving vehicular loads using long-gauge strain sensing.” J. Bridge Eng. 21 (10): 04016059. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000933.
Huth, O., G. Feltrin, J. Maeck, N. Kilic, and M. Motavalli. 2005. “Damage identification using modal data: Experiences on a prestressed concrete bridge.” J. Struct. Eng. 131 (12): 1898–1910. https://doi.org/10.1061/(ASCE)0733-9445(2005)131:12(1898).
ISO (International Organization for Standardization). 1995. Mechanical vibration-road surface 528 profiles-reporting of measured data. Rep. No. ISO-8608. Geneva: ISO.
Kang, L.-H., D.-K. Kim, and J.-H. Han. 2007. “Estimation of dynamic structural displacements using fiber Bragg grating strain sensors.” J. Sound Vib. 305 (3): 534–542.
Kim, T. M., D.-H. Kim, M. K. Kim, and Y. M. Lim. 2016. “Fiber Bragg grating-based long-gauge fiber optic sensor for monitoring of a 60 m full-scale prestressed concrete girder during lifting and loading.” Sensors Actuat. A-Phys. 252: 134–145.
Law, S. S., and X. Q. Zhu. 2004. “Dynamic behavior of damaged concrete bridge structures under moving vehicular loads.” Eng. Struct. 26 (9): 1279–1293.
Li, S. Z., and S. J. Chen. 2018. “Structural health monitoring of maglev guideway PC girders with distributed long-gauge FBG sensors.” Struct. Control Health Monit. 25 (1): e2046.
Li, S. Z., and Z. S. Wu. 2007. “Development of distributed long-gage fiber optic sensing system for structural health monitoring.” Struct. Health Monit. 6 (2): 133–143.
Li, S. Z., and Z. S. Wu. 2010. “Parametric estimation for RC flexural members based on distributed long-gauge fiber optic sensors.” J. Struct. Eng. 136 (2): 144–151. https://doi.org/10.1061/(ASCE)0733-9445(2010)136:2(144).
Li, Y. Y. 2010. “Hypersensitivity of strain-based indicators for structural damage identification: A review.” Mech. Syst. Signal Pr. 24 (3): 653–664.
Ma, Y. F., Z. Z. Guo, L. Wang, and J. R. Zhang. 2017. “Experimental investigation of corrosion effect on bond behavior between reinforcing bar and concrete.” Constr. Build. Mater. 152: 240–249.
Ma, Y. F., Z. Z. Guo, L. Wang, and J. R. Zhang. Forthcoming. “Probabilistic life prediction for reinforced concrete structures subjected to seasonal corrosion-fatigue damage.” J. Struct. Eng. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002666.
Moyo, P., J. M. W. Brownjohn, R. Suresh, and S. C. Tjin. 2005. “Development of fiber Bragg grating sensors for monitoring civil infrastructure.” Eng. Struct. 27 (12): 1828–1834.
Pachón, P., R. Castro, E. García-Macías, V. Compan, and E. Puertas. 2018. “Torroja’s bridge: Tailored experimental setup for SHM of a historical bridge with a reduced number of sensors.” Eng. Struct. 162: 11–21.
Pinkaew, T. 2006. “Identification of vehicle axle loads from bridge responses using updated static component technique.” Eng. Struct. 28 (11): 1599–1608.
Reynders, E., and G. De Roeck. 2010. “A local flexibility method for vibration-based damage localization and quantification.” J. Sound Vib. 329 (12): 2367–2383.
Salawu, O. S. 1997. “Detection of structural damage through changes in frequency: A review.” Eng. Struct. 19 (9): 718–723.
Santos, J. P., C. Crémona, L. Calado, P. Silveira, and A. D. Orcesi. 2016. “On-line unsupervised detection of early damage.” Struct. Control Health Monit. 23 (7): 1047–1069.
Santos, J. P., C. Crémona, A. D. Orcesi, and P. Silveira. 2013. “Multivariate statistical analysis for early damage detection.” Eng. Struct. 56: 273–285.
Santos, J. P., A. D. Orcesi, C. Crémona, and P. Silveira. 2015. “Baseline-free real-time assessment of structural changes.” Struct. Infrastruct. Eng. 11 (2): 145–161.
Shi, X. M., and C. S. Cai. 2009. “Simulation of dynamic effects of vehicles on pavement using a 3D interaction model.” J. Transp. Eng. 135 (10): 736–744. https://doi.org/10.1061/(ASCE)TE.1943-5436.0000045.
Sigurdardottir, D. H., J. Stearns, and B. Glisic. 2017. “Error in the determination of the deformed shape of prismatic beams using the double integration of curvature.” Smart Mater. Struct. 26 (7): 075002.
Sun, Z., T. Nagayama, M. Nishio, and Y. Fujino. 2018. “Investigation on a curvature-based damage detection method using displacement under moving vehicle.” Struct. Control Health Monit. 25 (1): e2044.
Wang, W., L. Deng, X. H. He, and C. S. Cai. 2018. “Truck weight limit for simply supported steel girder bridges based on bridge fatigue reliability.” J. Aerospace Eng. 31 (6): 04018079. https://doi.org/10.1061/(ASCE)AS.1943-5525.0000913.
Yao, Y., S.-T. E. Tung, and B. Glisic. 2014. “Crack detection and characterization techniques-an overview.” Struct. Control Health Monit. 21 (12): 1387–1413.
Zhang, Y., C. S. Cai, X. M. Shi, and C. Wang. 2006. “Vehicle-induced dynamic performance of FRP versus concrete slab bridge.” J. Bridge Eng. 11 (4): 410–419. https://doi.org/10.1061/(ASCE)1084-0702(2006)11:4(410).
Zhu, X. Q., and S. S. Law. 2002. “Dynamic load on continuous multi-lane bridge deck from moving vehicles.” J. Sound Vib. 251 (4): 697–716.
Information & Authors
Information
Published In
Copyright
© 2020 American Society of Civil Engineers.
History
Received: Feb 1, 2019
Accepted: Oct 29, 2019
Published online: Mar 20, 2020
Published in print: Jun 1, 2020
Discussion open until: Aug 20, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.