Abstract
Estimation of the time that a bridge or bridge component stays in a specific condition can guide decision-making on bridge maintenance and preservation. Statistical models of the time-in-condition rating (TICR) for bridges or bridge components are good candidates for this purpose. Typically, these models are calibrated using existing inspection data. Current practice tends to trim a large portion of the data that are deemed incomplete. However, there is actually a lot of useful information in these data (e.g., lower bounds for TICR), which should also be incorporated to establish better estimation of TICR. To address this, within the Bayesian framework, this paper proposes the adoption of a modified likelihood function to explicitly incorporate both complete and incomplete inspection data for model calibration. In addition, Bayesian model class selection is used to select the most appropriate models out of several candidate statistical models. The proposed approach is applied to establish TICR models for different types of bridges and bridge components in Colorado using National Bridge Inventory (NBI) data. The results and comparisons show the importance and necessity of explicitly incorporating incomplete inspection data in the model calibration and class selection for bridge condition deterioration models.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This work was supported by Mountain-Plains Consortium (MPC) under Grant No. 69A3551747108. This support is gratefully acknowledged.
References
Agrawal, A. K., A. Kawaguchi, and Z. Chen. 2010. “Deterioration rates of typical bridge elements in New York.” J. Bridge Eng. 15 (4): 419–429. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000123.
Beck, J. L., and K.-V. Yuen. 2004. “Model selection using response measurements: Bayesian probabilistic approach.” J. Eng. Mech. 130 (2): 192–203. https://doi.org/10.1061/(ASCE)0733-9399(2004)130:2(192).
Bolukbasi, M., J. Mohammadi, and D. Arditi. 2004. “Estimating the future condition of highway bridge components using national bridge inventory data.” Pract. Period. Struct. Des. Constr. 9 (1): 16–25. https://doi.org/10.1061/(ASCE)1084-0680(2004)9:1(16).
Cheung, S. H., and J. L. Beck. 2010. “Calculation of posterior probabilities for Bayesian model class assessment and averaging from posterior samples based on dynamic system data.” Comput.-Aided Civ. Infrastruct. Eng. 25 (5): 304–321. https://doi.org/10.1111/j.1467-8667.2009.00642.x.
Ching, J., and Y.-C. Chen. 2007. “Transitional Markov chain Monte Carlo method for Bayesian model updating, model class selection, and model averaging.” J. Eng. Mech. 133 (7): 816–832. https://doi.org/10.1061/(ASCE)0733-9399(2007)133:7(816).
Choe, D.-E., P. Gardoni, D. Rosowsky, and T. Haukaas. 2008. “Probabilistic capacity models and seismic fragility estimates for RC columns subject to corrosion.” Reliab. Eng. Syst. Saf. 93 (3): 383–393. https://doi.org/10.1016/j.ress.2006.12.015.
Choe, D.-E., P. Gardoni, D. Rosowsky, and T. Haukaas. 2009. “Seismic fragility estimates for reinforced concrete bridges subject to corrosion.” Struct. Saf. 31 (4): 275–283. https://doi.org/10.1016/j.strusafe.2008.10.001.
FHWA (Federal Highway Administration). 1995. Recording and coding guide for the structure inventory and appraisal of the nation’s bridges. Washington, DC: FHWA.
Gardoni, P., A. Der Kiureghian, and K. M. Mosalam. 2002. “Probabilistic capacity models and fragility estimates for reinforced concrete columns based on experimental observations.” J. Eng. Mech. 128 (10): 1024–1038. https://doi.org/10.1061/(ASCE)0733-9399(2002)128:10(1024).
Ghonima, O., T. Schumacher, A. Unnikrishnan, and A. Fleischhacker. 2018. Advancing bridge technology, task 10: Statistical analysis and modeling of US concrete highway bridge deck performance. Portland, OR: Portland State Univ.
Goller, B., J. Beck, and G. Schueller. 2011. “Evidence-based identification of weighting factors in Bayesian model updating using modal data.” J. Eng. Mech. 138 (5): 430–440. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000351.
Hesse, A. A., R. A. Atadero, and M. E. Ozbek. 2015. “Uncertainty in common NDE techniques for use in risk-based bridge inspection planning: Existing data.” J. Bridge Eng. 20 (11): 04015004. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000733.
Huang, Q., P. Gardoni, and S. Hurlebaus. 2015. “Adaptive reliability analysis of reinforced concrete bridges subject to seismic loading using nondestructive testing.” ASCE-ASME J. Risk Uncertainty Eng. Syst. Part A: Civ. Eng. 1 (4): 04015014. https://doi.org/10.1061/AJRUA6.0000835.
Jia, G., and P. Gardoni. 2018a. “Simulation-based approach for estimation of stochastic performances of deteriorating engineering systems.” Probab. Eng. Mech. 52 (Apr): 28–39. https://doi.org/10.1016/j.probengmech.2018.03.001.
Jia, G., and P. Gardoni. 2018b. “State-dependent stochastic models: A general stochastic framework for modeling deteriorating engineering systems considering multiple deterioration processes and their interactions.” Struct. Saf. 72 (May): 99–110. https://doi.org/10.1016/j.strusafe.2018.01.001.
Jia, G., and P. Gardoni. 2019. “Stochastic life-cycle analysis: Renewal-theory life-cycle analysis with state-dependent deterioration stochastic models.” Struct. Infrastruct. Eng. 15 (8): 1001–1014. https://doi.org/10.1080/15732479.2019.1590424.
Jia, G., A. A. Taflanidis, and J. L. Beck. 2015. “A new adaptive rejection sampling method using kernel density approximations and its application to subset simulation.” ASCE-ASME J. Risk Uncertainty Eng. Syst. Part A: Civ. Eng. 3 (2): D4015001. https://doi.org/10.1061/AJRUA6.0000841.
Kumar, R., D. B. Cline, and P. Gardoni. 2015. “A stochastic framework to model deterioration in engineering systems.” Struct. Saf. 53 (Mar): 36–43. https://doi.org/10.1016/j.strusafe.2014.12.001.
Kumar, R., and P. Gardoni. 2014. “Effect of seismic degradation on the fragility of reinforced concrete bridges.” Eng. Struct. 79 (Nov): 267–275. https://doi.org/10.1016/j.engstruct.2014.08.019.
Muto, M., and J. L. Beck. 2008. “Bayesian updating and model class selection for hysteretic structural models using stochastic simulation.” J. Vib. Control 14 (1–2): 7–34. https://doi.org/10.1177/1077546307079400.
Nasrollahi, M., and G. Washer. 2014. “Estimating inspection intervals for bridges based on statistical analysis of national bridge inventory data.” J. Bridge Eng. 20 (9): 04014104. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000710.
Papadimitriou, C., J. L. Beck, and L. Katafygiotis. 1997. “Asymptotic expansions for reliability and moments of uncertain systems.” J. Eng. Mech. 123 (12): 1219–1229. https://doi.org/10.1061/(ASCE)0733-9399(1997)123:12(1219).
Washer, G., R. Connor, M. Nasrollahi, and J. Provines. 2016a. “New framework for risk-based inspection of highway bridges.” J. Bridge Eng. 21 (4): 04015077. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000818.
Washer, G., R. Connor, M. Nasrollahi, and R. Reising. 2016b. “Verification of the framework for risk-based bridge inspection.” J. Bridge Eng. 21 (4): 04015078. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000787.
Wellalage, N. K. W., T. Zhang, and R. Dwight. 2014. “Calibrating Markov chain–based deterioration models for predicting future conditions of railway bridge elements.” J. Bridge Eng. 20 (2): 04014060. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000640.
Information & Authors
Information
Published In
Copyright
©2020 American Society of Civil Engineers.
History
Received: Mar 26, 2019
Accepted: Sep 30, 2019
Published online: Jan 16, 2020
Published in print: Mar 1, 2020
Discussion open until: Jun 16, 2020
ASCE Technical Topics:
- Analysis (by type)
- Architectural engineering
- Bayesian analysis
- Bridge components
- Bridge engineering
- Bridge management
- Building management
- Calibration
- Construction engineering
- Construction management
- Deterioration
- Engineering fundamentals
- Inspection
- Maintenance and operation
- Materials characterization
- Materials engineering
- Mathematics
- Measurement (by type)
- Statistical analysis (by type)
- Statistics
- Structural engineering
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.