Adequately Rigid Cross Beams for Bridge Tower Designs
Publication: Journal of Bridge Engineering
Volume 24, Issue 12
Abstract
In bridge tower designs, the cross beam provides the connection for a special lean-on bracing, which effectively enhances the lateral load transfer mechanism of the bridge tower. This study investigated the adequately rigid cross beam for a bridge tower based on elastic buckling and second-order analyses of a symmetrical portal frame. To obtain exact closed-form solutions, a classical matrix structural analysis approach considering a second-order effect was applied. First, the global structural stiffness matrix was formulated by combining the element stability stiffness matrices after coordinate transformation. Then the buckling axial load was formulated in the elastic buckling analysis. The lateral stiffness and bending moment of the bridge tower were formulated in the second-order analysis. These structural behaviors were then plotted in relationships with the cross-beam rigidity for given column inclinations. The tower lateral stiffness and the column base bending moment owing to the increase in the cross-beam rigidity had an asymptotic trend approaching the behaviors associated with an infinitely rigid cross beam. Considering this asymptotic trend, the adequately rigid cross beam requirements for the stiffness and strength behaviors were formulated and recommended for bridge tower designs. A detailed design procedure and an elementary design example are presented. Design implications for multiple-cross-beam bridge towers and bridge piers are also noted.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, or code generated or used during the study are available from the corresponding author by request, including the code and the data in Figs. 4–10.
References
Aristizabal-Ochoa, J. D. 1997. “Elastic stability of beam-columns with flexural connections under various conservative end axial forces.” J. Struct. Eng. 123 (9): 1194–1200. https://doi.org/10.1061/(ASCE)0733-9445(1997)123:9(1194).
Chajes, A., and W.-S. Chen. 1979. “Stability of guyed towers.” J. Struct. Div. 105 (1): 163–174.
Choi, D.-H., S.-G. Gwon, and H.-S. Na. 2014. “Simplified analysis for preliminary design of towers in suspension bridges.” J. Bridge Eng. 19 (3): 04013007. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000551.
Ekhande, S. G., M. Selvappalam, and M. K. S. Madugula. 1989. “Stability functions for three-dimensional beam-columns.” J. Struct. Eng. 115 (2): 467–479. https://doi.org/10.1061/(ASCE)0733-9445(1989)115:2(467).
Fukuda, T. 1968. “Multispan suspension bridges under lateral loads.” J. Struct. Div. 94 (1): 133–152.
Gantes, C., R. Khoury, J. J. Connor, and C. Pouangare. 1993. “Modeling, loading, and preliminary design considerations for tall guyed towers.” Comput. Struct. 49 (5): 797–805. https://doi.org/10.1016/0045-7949(93)90027-B.
Guo, Y. L., P. P. Fu, P. Zhou, and J. Z. Tong. 2016. “Elastic buckling and load resistance of a single cross-arm pre-tensioned cable stayed buckling-restrained brace.” Eng. Struct. 126 (Nov): 516–530. https://doi.org/10.1016/j.engstruct.2016.08.013.
Guo, Y. L., P. Zhou, M. A. Bradford, Y. L. Pi, J. Z. Tong, and P. P. Fu. 2017. “Theoretical and numerical studies of elastic buckling and load resistance of double cross-arm pre-tensioned cable stayed buckling-restrained braces.” Eng. Struct. 153 (Dec): 674–699. https://doi.org/10.1016/j.engstruct.2017.10.064.
Hibbeler, R. C. 2008. Structural analysis. 7th ed. Upper Saddle River, NJ: Prentice-Hall.
Irvine, H. M., and M. J. O'Sullivan. 1979. “Elastic stability of simple guyed towers.” Appl. Ocean Res. 1 (4): 203–207. https://doi.org/10.1016/0141-1187(79)90028-2.
Long, Y. Q., S. H. Bao, W. Q. Kuang, and S. Yuan. 2006. Structural mechanics. 2nd ed. [In Chinese.] Beijing: Higher Education Press.
Ma, X., J. Nie, and J. Fan. 2016. “Longitudinal stiffness of multispan suspension bridges.” J. Bridge Eng. 21 (5): 06015010. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000878.
McGuire, W., R. H. Gallagher, and R. D. Ziemian. 2014. Matrix structural analysis. 2nd ed.
Munoz, H. R. 1991. “Elastic second-order computer analysis of beam–columns and frames.” M.S. thesis, Univ. of Texas at Austin. https://apps.dtic.mil/dtic/tr/fulltext/u2/a241247.pdf.
Pan, W.-H., M. R. Eatherton, X. Nie, and J.-S. Fan. 2018a. “Design of pre-tensioned cable-stayed buckling-restrained brace considering interrelationship between bracing strength and stiffness requirements.” J. Struct. Eng. 144 (10): 04018169. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002162.
Pan, W.-H., M. R. Eatherton, X. Nie, and J.-S. Fan. 2018b. “Stability and adequate bracing design of pretensioned cable-braced inverted-Y-shaped Ferris wheel support system using matrix structural second-order analysis approach.” J. Struct. Eng. 144 (10): 04018194. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002185.
Pan, W.-H., M. R. Eatherton, M.-X. Tao, Y. Yang, and X. Nie. 2017. “Design of single-level guyed towers considering interrelationship between bracing strength and rigidity requirements.” J. Struct. Eng. 143 (9): 04017128. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001857.
Przemieniecki, J. S. 1968. Theory of matrix structural analysis. New York: McGraw-Hill.
Wang, L., and T. A. Helwig. 2005. “Critical imperfections for beam bracing systems.” J. Struct. Eng. 131 (6): 933–940. https://doi.org/10.1061/(ASCE)0733-9445(2005)131:6(933).
Winter, G. 1958. “Lateral bracing of columns and beams.” J. Struct. Div. 84 (2): 1–22.
Yang, Y.-B., and W. McGuire. 1986. “Stiffness matrix for geometric nonlinear analysis.” J. Struct. Eng. 112 (4): 853–877. https://doi.org/10.1061/(ASCE)0733-9445(1986)112:4(853).
Yoshida, O., M. Okuda, and T. Moriya. 2004. “Structural characteristics and applicability of four-span suspension bridge.” J. Bridge Eng. 9 (5): 453–463. https://doi.org/10.1061/(ASCE)1084-0702(2004)9:5(453).
Yuan, S. 2008. Programming structural mechanics. 2nd ed. [In Chinese.] Beijing: Higher Education Press.
Ziemian, R. D., ed. 2010. Guide to stability design criteria for metal structures. 6th ed. Hoboken, NJ: Wiley.
Information & Authors
Information
Published In
Copyright
© 2019 American Society of Civil Engineers.
History
Received: Feb 14, 2019
Accepted: Jun 28, 2019
Published online: Oct 4, 2019
Published in print: Dec 1, 2019
Discussion open until: Mar 4, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.