Parametric Optimization of Orthotropic Girders in a Cable-Supported Bridge
Publication: Journal of Bridge Engineering
Volume 24, Issue 12
Abstract
In the last six decades, closed-box orthotropic steel girders have been widely used in cable-supported bridges. Several parametric studies were previously carried out to reduce inherent fatigue stress problems and to generally improve bridge girder designs. However, in most cases, only one or two parameters were studied simultaneously; hence, the full potential of orthotropic girders is not achieved. In the present work, a multiscale finite-element (FE) model of a suspension bridge is established with sophisticated boundary conditions applied to a local parametric submodel of a bridge girder. With this local model an automated gradient-based parametric optimization is carried out with the goal of minimizing the weight and price of the girder. It is possible to simultaneously optimize several design variables and fulfill constraint functions on fatigue stresses, deformation, and buckling. The results show potential weight savings of 6%–14% and price savings of 9%–17%, mainly found by using thinner plates and narrower troughs. Besides the explicit savings, the results indicate the potential for applying gradient-based optimization in civil engineering designs.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The presented study is part of an industrial Ph.D. project with the title “Innovative Design of Steel Bridge Girders in Cable-Supported Bridges” and is carried out in cooperation with COWI A/S DTU Civil Engineering and DTU Mechanical Engineering. The project is supported financially by the COWI Foundation grant C-131.02 and Innovation Fund Denmark Grant 5189-00112B.
References
AASHTO. 2002. AASHTO LRFD bridge design specifications 1998 (2002 interims). 2nd ed. Washington, DC: AASHTO.
Abaqus. 2016. Documentation. Vélizy-Villacoublay, France: Dassault Systemes.
Andersen, S., and U. M. Hansen. 2012. “Static and dynamic analysis of Izmit Bay Bridge.” M.Sc. thesis, Dept. of Civil Engineering, Technical Univ. of Denmark.
Bjærre, S. 2015. “Improvements to present design philosophy of orthotropic steel decks with focus on fatigue.” M.Sc. thesis, Dept. of Civil Engineering, Technical Univ. of Denmark.
BSI (British Standards Institution). 2008. UK national annex to Eurocode 3: Design of steel structures—Part 1-9: Fatigue. BS NA EN 1993-1-9:2005. London: BSI.
Byrd, R. H., J. Nocedal, and R. A. Waltz. 2006. “KNITRO: An integrated package for nonlinear optimization.” In Large-scale nonlinear optimization, edited by G. Di Pillo and M. Roma, 35–59. Vol. 83 of Nonconvex optimization and its applications. Boston: Springer. https://doi.org/10.1007/0-387-30065-1_4.
Connor, R. J. 2004. “Influence of cutout geometry on stresses at welded rib-to-diaphragm connections in steel orthotropic bridge decks.” Transp. Res. Rec. 1892 (1): 78–87. https://doi.org/10.3141/1892-09.
De Backer, H., A. Outtier, and P. Van Bogaert. 2006. “Analytical model for the stiffener-to-deck plate detail in orthotropic bridges.” In Vol. 2 of Proc., 10th East Asia-Pacific Conf. on Structural Engineering and Construction, 47–52. Thailand: Asian Institute of Technology.
De Corte, W. 2009. “Parametric study of floorbeam cutouts for orthotropic bridge decks to determine shape factors.” Bridge Struct. 5 (2–3): 75–85. https://doi.org/10.1080/15732480903142518.
De Corte, W., and P. Van Bogaert. 2007. “Improvements to the analysis of floorbeams with additional web cutouts for orthotropic plated decks with closed continuous ribs.” Steel Compos. Struct. 7 (1): 1–18. https://doi.org/10.12989/scs.2007.7.1.001.
Ding, B. D., H. L. Lv, and Y. S. Ji. 2010. “Finite element model updating based on direct optimization technique.” Adv. Mater. Res. 163–167: 2804–2810. https://doi.org/10.4028/www.scientific.net/AMR.163-167.2804.
CEN (European Committee for Standardization). 2007. Eurocode 3 - Design of steel structures - Part 2: Steel bridges. EN 1993-2:2007, 2006. Brussels, Belgium: CEN.
Fettahoglu, A. 2015. “Effect of cross-beam on stresses revealed in orthotropic steel bridges.” Steel Compos. Struct. 18 (1): 149–163. https://doi.org/10.12989/scs.2015.18.1.14.
Fettahoglu, A. 2016. “Optimizing rib width to height and rib spacing to deck plate thickness ratios in orthotropic decks.” Cogent Eng. 3 (1). https://doi.org/10.1080/23311916.2016.1154703.
Fisher, J. W., and R. J. Dexter. 1997. Fatigue cracking of orthotropic steel decks. IABSE Rep. 76. Zürich, Switzerland: International Association for Bridge and Structural Engineering.
Hobbacher, A. 2008. Recommendations for fatigue design of welded joints and components. Rep. No. IIW-1823-07/XIII-2151r4-07/XV-1254r4-07. Paris: International Institute of Welding.
MATLAB. 2016. R2016b documentation. Natick, MA: MathWorks.
Mrsa, Z., and G. Medic. 1996. “Optimal nozzle design using finite element conjugate gradient based software.” In Hydraulic engineering software VI, 479–488. Southampton, UK: WIT Press.
Nagar, S. 2018. “Introduction to Python basics.” In Introduction to Python for engineers and scientists, 13–30. New York: Apress.
Oh, C. K., and D. Bae. 2013. “Fatigue test of an advanced orthotropic steel deck system using high performance steel for bridges.” Int. J. Steel Struct. 13 (1): 93–101. https://doi.org/10.1007/s13296-013-1009-6.
Oh, C. K., K. J. Hong, D. Bae, H. Do, and T. Han. 2011. “Analytical and experimental studies on optimal details of orthotropic steel decks for long span bridges.” Int. J. Steel Struct. 11 (2): 227–234. https://doi.org/10.1007/s13296-011-2010-6.
Peng, H., M. Jun, and X. Bing. 2005. “FEM-based parametric optimization design of wedged-ring joint structure.” J. Mech. Strength 27 (2): 191–195.
Tang, M.-C. 2011. “A new concept of orthotropic steel bridge deck.” Struct. Infrastruct. Eng. 7 (7–8): 587–595. https://doi.org/10.1080/15732479.2010.496996.
Wolchuk, R. 1990. “Lessons from weld cracks in orthotropic decks on three European bridges.” J. Struct. Eng. 116 (1): 75–84. https://doi.org/10.1061/(ASCE)0733-9445(1990)116:1(75.
Wolchuk, R. 1999. “Steel orthotropic decks: Developments in the 1990s.” Transp. Res. Rec. 1688 (1): 30–37. https://doi.org/10.3141/1688-04.
Wolchuk, R., and F. R. Harris. 1959. “Orthotropic plate design for steel bridges.” Civ. Eng. 29 (2): 38–43.
Information & Authors
Information
Published In
Copyright
© 2019 American Society of Civil Engineers.
History
Received: Sep 21, 2018
Accepted: Jun 27, 2019
Published online: Sep 25, 2019
Published in print: Dec 1, 2019
Discussion open until: Feb 25, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.