Residual Strength of Cable Stay Strands from Blast Qualification
Publication: Journal of Bridge Engineering
Volume 24, Issue 8
Abstract
This paper describes the residual strength of damaged strand and wires from protected cable stay bundles subjected to severe blast qualification tests. This effort was motivated by the question: What reserve strength is available, if any, in damaged strands and wires from protected cable stay bundles surviving a blast test? This question arises from performance requirements to evaluate the adequacy of protection mitigation measures for cable stay bundles. To address this question, selected strands and wires from cable stay bundles had their damage characterized and were tested in tension, and then their tension capacity was compared with that of undamaged strands or wires. Testing revealed cold work of the strands from the blast reduces the residual strength by a mean value of 5% and, based on these results, it is recommended to apply a strength reduction factor of 0.95 to all intact or non-severed wires in a cable stay bundle for future blast qualification tests.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This research was supported in part by the Federal Highway Administration (FHWA). The advice and consultation provided by Sarah Skeen, Steve Ernst, and Sheila Duwadi of the FHWA was greatly appreciated and most helpful. Any opinions, findings, conclusions, and recommendations presented in this paper are those of the authors and do not necessarily reflect the views of the sponsors. Permission to publish was granted by the FHWA.
References
ASTM. 2016a. Standard test methods and definitions for mechanical testing of steel products. Book of Standards Vol. 01.03. ASTM A370. West Conshohocken, PA: ASTM.
ASTM. 2016b. Standard specification for low-relaxation, seven-wire steel strand for prestressed concrete. Book of Standards Vol. 01.04. ASTM A416/A416M. West Conshohocken, PA: ASTM.
ASTM. 2016c. Standard test methods for testing multi-wire steel prestressing strand. Book of Standards Vol. 01.04. ASTM A1061/A1061M. West Conshohocken, PA: ASTM.
Chiarito, V. P., J. C. Ray, P. Papados, C. P. Rabalais, T. G. Coleman, P. J. O’Connor, and E. M. Weinstein, 2011. Assessment of the vulnerability of cable bundles of cable-stayed bridges to explosive threats. Technical Rep. ERDC/GSL TR-11-40. Vicksburg, MS: US Army Engineer Research and Development Center (ERDC).
FHWA (Federal Highway Administration). 2003. Recommendations for bridge and tunnel security. Rep. No. FHWA-IF-03-036. Washington, DC: FHWA.
Imetrum Limited. 2015. Video gauge user manual: Version 5.2.0. Bristol, UK: Imetrum Limited.
Ocel, J. M., J. Provines, and V. Charito, 2017. Cable stay strand residual strength related to security threats. Rep. No. FHWA-HRT-17-109. McLean, VA: Federal Highway Administration.
PTI (Post-Tensioning Institute) 2012. Recommendations for stay cable design, testing, and installation. PTI DC45.1. Farmington Hills, MI: PTI.
Information & Authors
Information
Published In
Copyright
© 2019 American Society of Civil Engineers.
History
Received: Jun 14, 2018
Accepted: Mar 8, 2019
Published online: May 21, 2019
Published in print: Aug 1, 2019
Discussion open until: Oct 21, 2019
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.