Efficient Two-Way Shear Grillage Model Solution for Bridge RC Four-Pile Caps under Wall Loading
Publication: Journal of Bridge Engineering
Volume 24, Issue 8
Abstract
Reinforced concrete four-pile caps under wall loading occur in heavily loaded foundations in bridge construction. The failure mode of shear across the full width of the cap may occur in these deep structural elements. A statically determinate two-way grillage model, comprising orthogonal deep beam grillage elements obeying a predetermined test observing deflection pattern and boundary conditions, is established to solve the structure’s shear capacity. The model gives more accurate and faster solutions than the traditional strut-and-tie method and commercial nonlinear numerical modeling. A key step to solving the model is a linear constitutive (load-deflection) relationship developed for the grillage elements. The grillage model is verified against laboratory experiments for nine pile caps at the University of Southampton (UoS) with the results of a numerical modeling parametric study. A Visual Basic Userform-based design software is developed, incorporating the model and enabling engineers to obtain the shear capacity, full-field reinforcement stress distribution, and cap deflections within seconds.
Get full access to this article
View all available purchase options and get full access to this article.
References
AASHTO. 2012. AASHTO LRFD bridge design specifications. 6th ed. Washington, DC: AASHTO.
ACI (American Concrete Institute). 2011. Building code requirements for structural concrete and commentary. ACI 318-11. Farmington Hills, MI: ACI.
ACI (American Concrete Institute). 2014. Building code requirements for structural concrete. ACI 318-14. Farmington Hills, MI: ACI.
Bloodworth, A. G., J. Cao, and M. Xu. 2012. “Numerical modeling of shear behavior of reinforced concrete pile caps.” J. Struct. Eng. 138 (6): 708–717. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000499.
BSI (British Standards Institution). 1990. Steel, concrete and composite bridges—Part 4: Code of practice for design of concrete bridges. BS 5400-4. Milton Keynes, UK: BSI.
BSI (British Standards Institution). 1997. Structural use of concrete—Part 1: Code of practice for design and construction. BS 8110-1. Milton Keynes, UK: BSI.
BSI (British Standards Institution). 2004. Design of concrete structures—Part 1-1: General rules and rules for buildings. BS EN 1992-1-1:2004. London: BSI.
BSI (British Standards Institution). 2005. Design of concrete structures—Part 2: Concrete bridges—Design and detailing rules. BS EN 1992-2:2005. London: BSI.
BSI (British Standards Institution). 2010. Eurocode 2: Design of concrete structures—Part 1-1: General rules and rules for buildings. BS EN 1992-1-1:2004. London: BSI.
Cao, J. 2009. “The shear behavior of the reinforced concrete four-pile caps.” Ph.D. thesis, Faculty of Engineering and Physical Science, Univ. of Southampton.
Cao, J., and A. G. Bloodworth. 2012. “Shear behaviour of reinforced concrete pile caps under full-width width loading.” Proc. Inst. Civ. Eng. Struct. Build. 165 (4): 165–177. https://doi.org/10.1680/stbu.9.00077.
CIRIA (Construction Industry Research and Information Association). 1977. CIRIA guide 2—The design of deep beams in reinforced concrete beams. London: CIRIA.
Clarke, J. L. 1973. Behaviour and design of pile caps with four piles. Technical Rep. No. 42.489. London: Cement and Concrete Association.
De Paiva, H. A. R., and W. J. Austin. 1960. Behaviour and design of deep structural members part 3: Test of reinforced concrete deep beams. Urbana–Champagne, IL: Univ. of Illinois.
Hardjasaputra, H. 2015. “Evolutionary structural optimization as tool in finding strut-and-tie models for designing reinforced concrete deep beam.” In Proc., 5th Int. Conf. of Euro Asia Civil Engineering Forum, 995–1000. Surabaya, East Java, Indonesia: EACEF-5.
Hognestad, E. 1951. A study of combined bending and axial load in reinforced concrete members. Eng. Expt. Station Bulletin Rep. No. 399. Urbana–Champagne, IL: Univ. of Illinois.
Kani, G. 1964. “The riddle of shear failure and its solution.” ACI J. 61 (4): 441–467. https://doi.org/10.14359/7791.
Kotsovos, M. D. 1987. “Shear failure of reinforced concrete beams.” Eng. Struct. 9 (1): 32–38. https://doi.org/10.1016/0141-0296(87)90038-1.
Leu, L. J., C. W. Huang, C. S. Chen, and Y. P. Liao. 2006. “Strut-and-tie design methodology for three-dimensional reinforced concrete structures.” J. Struct. Eng. 132 (6): 929–938. https://doi.org/10.1061/(ASCE)0733-9445(2006)132:6(929).
Mathern, A., G. Chantelot, P. S. Per Kettil, and R. R. Bjorn Engstrom. 2017. “Enhanced strut-and-tie model for reinforced concrete pile caps.” In Proc., 39th IABSE Symp.—Engineering the future, 607–614. Vancouver, BC: IABSE.
Mihaylov, B. I. 2015. “Five-spring model for complete shear behaviour of deep beams.” Struct. Concr. 16 (1): 71–83. https://doi.org/10.1002/suco.201400044.
Mihaylov, B. I., E. C. Bentz, and M. P. Collins. 2013. “Two-parameter kinematic theory for shear behavior of deep beams.” ACI Struct. J. 110 (3): 447–455. https://doi.org/10.14359/51685602.
Mihaylov, B. I., B. Hunt, E. C. Bentz, and M. P. Collins. 2015. “Three-parameter kinematic theory for shear behavior of continuous deep beams.” ACI Struct. J. 112 (1): 47–57. https://doi.org/10.14359/51687180.
Rao, G. A., K. Kunal, and R. Eligehausen. 2007. “Shear strength of reinforced concrete deep beams.” In Proc., 6th Int. Conf. Fracture Mechanics of Concrete and Concrete Structures (FraMCoS-6), 693–699. Catania, Italy: FraMCoS.
Standards Australia. 2004. As 5100.5: 2004—Bridge design part 5: Concrete. Sydney, NSW: SA.
Standards Australia. 2009. As 3600: 2009 concrete structures. Sydney, NSW: SA.
Waner, R. F., B. V. Rangan, A. S. Hall, and K. A. Faulkes. 1998. Concrete Structures. Frenchs Forest, NSW, Australia: Addison Wesley Longman.
Yang, C. J. and Jun D. H. 2003. “A study on the shear behaviour of deep beams under point loads.” In Proc., 9th East Asia-Pacific Conf. on Structural Engineering and Construction, 85–90. Bali, Indonesia: EASEC.
Information & Authors
Information
Published In
Copyright
© 2019 American Society of Civil Engineers.
History
Received: Aug 1, 2018
Accepted: Feb 7, 2019
Published online: May 16, 2019
Published in print: Aug 1, 2019
Discussion open until: Oct 16, 2019
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.