Model Test and Optimal Design of the Joint in a Sunflower Arch Bridge
Publication: Journal of Bridge Engineering
Volume 24, Issue 2
Abstract
The sunflower arch bridge is a new type of reinforced concrete arch bridge that has been developed recently. Because of the complex constructional details, the stress distribution at the joint between the main arch and spandrel arch is very complicated. To explore the mechanical behavior of this new type of arch bridge, particularly the stress state at the joint of the arch, a 1:5-scaled model of a segment for a sunflower arch bridge was tested. The displacements and stresses at key locations of the tested model were recorded. The experimental results showed that the displacements of the main arch and spandrel arch under dead loads were notably small, which indicated that the global stiffness of the arch was sufficiently large. Moreover, the maximum tensile stress at the end of the spandrel arch subjected to dead loads was larger than the tensile strength of the concrete; therefore, the concrete in these regions is vulnerable to cracking. To avoid cracks at the end of the spandrel arch, an optimized design scheme was proposed for the joint using a steel I-beam to replace the concrete at the end of the spandrel arch. Design parameters were also suggested through a comprehensive parametric investigation based on finite-element analysis (FEA).
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This research was financially supported by the National Natural Science Foundation of China (51678169), the Pearl River S&T Nova Program of Guangzhou (201605061406434), the Technology Planning Project of Guangdong Province (2016B050501004), and the Scholarship of the Chinese Scholarship Council (201708440154). Moreover, the Guangdong Province Communications Planning & Design Institute that designed the background bridge is also acknowledged.
References
ANSYS. 2012. ANSYS 14.5 Help. Canonsburg, PA: ANSYS, Inc.
Bayraktar, A., T. Türker, and A. C. Altunişik. 2015. “Experimental frequencies and damping ratios for historical masonry arch bridges.” Constr. Build. Mater. 75 (Jan): 234–241. https://doi.org/10.1016/j.conbuildmat.2014.10.044.
Feng, Y. 2005. “Research and scale model test on the local stability of steel box arch segment of Lupu bridge.” In Vol. 2 of Advances in Steel Structures, edited by Z. Y. Shen and S. L. Chan, 1663–1667. Amsterdam, Netherlands: Elsevier.
Guo, Y. L., H. Chen, Y. L. Pi, and M. A. Bradford. 2016. “In-plane strength of steel arches with a sinusoidal corrugated web under a full-span uniform vertical load: Experimental and numerical investigations.” Eng. Struct. 110 (Mar): 105–115. https://doi.org/10.1016/j.engstruct.2015.11.056.
Halding, P. S., K. D. Hertz, J. W. Schmidt, and B. J. Kennedy. 2017. “Full-scale load tests of Pearl-Chain arches.” Eng. Struct. 131 (Jan): 101–114. https://doi.org/10.1016/j.engstruct.2016.10.022.
Huynh, C. P., S. Mustapha, P. Runcie, and F. Porikli. 2015. “Multi-class vector machines for paint condition assessment on the Sydney Harbour Bridge using hyperspectral imaging.” Struct. Monit. Maint. 2 (3): 181–197. https://doi.org/10.12989/smm.2015.2.3.181.
Kang, H. J., Y. Y. Zhao, H. P. Zhu, and Y. X. Jin. 2013. “Static behavior of a new type of cable-arch bridge.” J. Constr. Steel Res. 81 (Feb): 1–10. https://doi.org/10.1016/j.jcsr.2012.10.010.
Liang, Q. X. 2013. “Mechanical behavior optimization analysis of sunflower arch bridge.” [In Chinese.] Master’s degree, Wuhan Univ. of Technology.
Liu, A. R., Y. H. Huang, J. Y. Fu, Q. C. Yu, and R. Rao. 2015. “Experimental research on stable ultimate bearing capacity of leaning-type arch rib systems.” J. Constr. Steel Res. 114 (Nov): 281–292. https://doi.org/10.1016/j.jcsr.2015.08.011.
Lund, M. S. M., K. K. Hansen, R. Truelsen, and L. Johansen. 2016. “Pervious concrete fill in Pearl-Chain Bridges: Using small-scale results in full-scale implementation.” Constr. Build. Mater. 106 (Mar): 404–414. https://doi.org/10.1016/j.conbuildmat.2015.12.104.
Ma, B., Y. P. Lin, J. J. Zhang, and Y. Xu. 2013. “Decade review: Bridge type selection and challenges of Lupu bridge.” Struct. Eng. Int. 23 (3): 317–322. https://doi.org/10.2749/101686613X13627347099872.
MOC (Ministry of Commerce). 2003. Standard for test method of mechanical properties on ordinary concrete. [In Chinese.] GB/T 50081-2002. Beijing: MOC.
MOC (Ministry of Commerce). 2015. Specifications for design of highway steel bridge. [In Chinese.] JTG D64-2015. Beijing: MOC.
MOHURD (Ministry of Housing and Urban-Rural Development). 2015. Code for design of concrete structures. [In Chinese.] GB 50010-2010. Beijing: MOHURD.
MOHURD (Ministry of Housing and Urban-Rural Development). 2016. Technical code for test and evaluation of city bridges. [In Chinese.] CJJ/T 233-2015. Beijing: MOHURD.
Shen, J. W. 2015. “Research on the mechanical properties of the sunflower arch bridge and node model test.” [In Chinese.] Master’s degree, Guangzhou Univ.
Shoji, G., J. Kitahara, A. Kojima, T. Kanakubo, K. Shimizu, and Y. Sakai. 2008. “Mechanism of seismic response of a PC cable-stayed bridge subject to a long-period seismic excitation.” Doboku Gakka Ronbunshuu 64 (4): 982–1001. https://doi.org/10.2208/jsceja.64.982.
Wang, W. Q. 2013. “Structural optimization design on the sunflower shaped arch bridge.” Appl. Mech. Mater. 427–429: 90–93. https://doi.org/10.4028/www.scientific.net/AMM.427-429.90.
Xiang, Y. Q., L. C. Zhang, and Q. Q. Wu. 2013. “Behaviour analysis of prestressed concrete deck-tied arch bridge.” Adv. Mater. Res. 671–674: 952–956. https://doi.org/10.4028/www.scientific.net/AMR.671-674.952.
Yang, J. J. 2005. Similarity theory and structural model test. [In Chinese.] Wuhan, China: Wuhan Univ. Technology Press.
Ye, M. X., Q. Huang, and Q. Q. Wu. 2007. “Analysis of steel-concrete composite structure with overlap slab of Xingguang bridge.” J. Cent. South Univ. Technol. 14 (1): 120–124. https://doi.org/10.1007/s11771-007-0024-1.
Yu, Y., T. H. T. Chan, Z. H. Sun, and Z. X. Li. 2012. “Mixed-dimensional consistent coupling by multi-point constraint equations for efficient multi-scale modeling.” Adv. Struct. Eng. 15 (5): 837–853. https://doi.org/10.1260/1369-4332.15.5.837.
Zhang, J., A. Liu, J. Ma, H. Huang, L. Mei, and Y. Li. 2013. “Behavior of self-anchored suspension bridges in the structural system transformation.” J. Bridge Eng. 18 (8): 712–721. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000422.
Zhang, K. B., J. R. Zhang, and D. H. Yan. 2008. “Model test of half-through CFST tied-arch bridge in the process of arch rib erection.” Struct. Eng. Int. 18 (4): 396–402. https://doi.org/10.2749/101686608786455199.
Information & Authors
Information
Published In
Copyright
© 2018 American Society of Civil Engineers.
History
Received: May 14, 2018
Accepted: Aug 9, 2018
Published online: Dec 7, 2018
Published in print: Feb 1, 2019
Discussion open until: May 7, 2019
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.