Predicting Flexural Fatigue Performance of RC Beams Strengthened with Externally Bonded FRP due to FRP Debonding
Publication: Journal of Bridge Engineering
Volume 22, Issue 11
Abstract
In this study, an analytical model is proposed to predict the flexural fatigue behavior of reinforced concrete (RC) beams strengthened with externally bonded (EB) fiber-reinforced polymer (FRP) laminates due to FRP debonding. The proposed model is capable of predicting the bond stress of EB FRP-concrete interface, flexural fatigue behavior, tensile strain of EB FRP, and beam deflection while considering bond heterogeneity due to different levels of fatigue damage. A trilinear bond-slip relation is adopted to represent the hardening, softening, and residual phase of the FRP-concrete bond stress. The fatigue bond degradation is characterized by a strain-dependent relation using available test data and incorporated into a one-dimensional mesh with appropriate boundary conditions to obtain the closed-form solution. To validate the proposed model, test results from several existing studies are compared with reasonable correlation. The parametric study shows that higher concrete compressive strength and axial stiffness of FRP with larger diameter steel rebar could be beneficial.
Get full access to this article
View all available purchase options and get full access to this article.
References
ACI (American Concrete Institute). (2008). “Guide for the design and construction of externally bonded FRP systems for strengthening concrete structures.” ACI 440.2R-08, Farmington Hills, MI.
Aidoo, J., Harris, K., and Petrou, M. (2004). “Fatigue behavior of carbon fiber reinforced polymer-strengthened concrete bridge girders.” J. Compos. Constr., 501–509.
Al-Hammoud, R., Soudki, K., and Topper, T. H. (2010). “Bond analysis of corroded reinforced concrete beams under monotonic and fatigue loads.” Cem. Concr. Compos., 32(3), 194–203.
Alyousef, R., Topper, T., and Al-Mayah, A. (2016). “Effect of FRP wrapping on fatigue bond behavior of spliced concrete beams.” J. Compos. Constr., 04015030.
Arduini, M., and Nanni, A. (1997). “Behavior of precracked RC beams strengthened with carbon FRP sheets.” J. Compos. Constr., 63–70.
Bakis, C., et al. (2002). “Fiber-reinforced polymer composites for construction—State-of-the-art review.” J. Compos. Constr., 73–87.
Barnes, R., and Mays, G. (1999). “Fatigue performance of concrete beams strengthened with CFRP plates.” J. Compos. Constr., 63–72.
Bizindavyi, L., and Neale, K. (1999). “Transfer lengths and bond strengths for composites bonded to concrete.” J. Compos. Constr., 153–160.
Brena, S. F., Benouaich, M. A., Kreger, M. E., and Wood, S. L. (2005). “Fatigue tests of reinforced concrete beams strengthened using carbon fiber-reinforced polymer composites.” ACI Struct. J., 102(2), 305–313.
Charalambidi, B., Rousakis, T., and Karabinis, A. (2016a). “Fatigue behavior of large-scale reinforced concrete beams strengthened in flexure with fiber-reinforced polymer laminates.” J. Compos. Constr., 04016035.
Charalambidi, B. G., Rousakis, T. C., and Karabinis, A. I. (2016b). “Analysis of the fatigue behavior of reinforced concrete beams strengthened in flexure with fiber reinforced polymer laminates.” Composites Part B, 96(Jul), 69–78.
Chen, C. (2016). “Fatigue behavior and modeling of reinforced concrete structures using NSM FRP composites.” Ph.D. dissertation, Univ. of California, Davis, CA.
Chen, C., and Cheng, L. (2016a). “Fatigue bond characteristics and degradation of near-surface mounted CFRP rods and strips in concrete.” J. Compos. Constr., 04015066.
Chen, C., and Cheng, L. (2016b). “Theoretical solution to fatigue bond stress distribution of NSM FRP reinforcement in concrete.” Composites Part B, 99(Aug), 453–464.
Cox, B. N., and Marshall, D. B. (1991). “Stable and unstable solutions for bridged cracks in various specimens.” Acta Metall. Mater., 39(4), 579–589.
De Lorenzis, L., Rizzo, A., and La Tegola, A. (2002). “A modified pull-out test for bond of near-surface mounted FRP rods in concrete.” Composites Part B, 33(8), 589–603.
Diab, H. M., Wu, Z., and Iwashita, K. (2009). “Theoretical solution for fatigue debonding growth and fatigue life prediction of FRP-concrete interfaces.” Adv. Struct. Eng., 12(6), 781–792.
Dong, Y., Ansari, F., and Karbhari, V. M. (2011). “Fatigue performance of reinforced concrete beams with externally bonded CFRP reinforcement.” Struct. Infrastruct. Eng., 7(3), 229–241.
Ferrier, E., Bigaud, D., Clément, J., and Hamelin, P. (2011). “Fatigue-loading effect on RC beams strengthened with externally bonded FRP.” Constr. Build. Mater., 25(2), 539–546.
Gordon, K., and Cheng, L. (2010). “Evaluation of empirical fatigue prediction models for FRP-strengthened RC beams.” ACI Special Publication SP-275-37, American Concrete Institute, Farmington Hills, MI.
Gussenhoven, R., and Brena, S. F. (2005). “Fatigue behaviour of reinforced concrete beams strengthened with different FRP laminate configurations.” SP 230-36, American Concrete Institute, Farmington Hills, MI.
Heffernan, P., and Erki, M. (2004). “Fatigue behavior of reinforced concrete beams strengthened with carbon fiber reinforced plastic laminates.” J. Compos. Constr., 132–140.
Heffernan, P. J. (1997). “Fatigue behaviour of reinforced concrete beams strengthened with CFRP laminates.” Ph.D. dissertation, Royal Military College of Canada, Kingston, ON, Canada.
Holmen, J. O. (1982). “Fatigue of concrete by constant and variable amplitude loading.” SP-75, American Concrete Institute, Detroit, 1–13.
Huang, H., Dai, J., Brigham, J., and Wang, W. (2017). “Fatigue behavior of reinforced concrete beams strengthened with externally bonded prestressed CFRP sheets.” J. Compos. Constr., 04016108.
Kim, Y., and Heffernan, P. (2008). “Fatigue behavior of externally strengthened concrete beams with fiber-reinforced polymers: State of-the-art.” J. Compos. Constr., 246–256.
Lu, X. Z., Teng, J., Ye, L. P., and Jiang, J. J. (2005). “Bond-slip models for FRP sheets/plates bonded to concrete.” Eng. Struct., 27(6), 920–937.
Mahal, M., Täljsten, B., and Blanksvärd, T. (2016). “Experimental performance of RC beams strengthened with FRP materials under monotonic and fatigue loads.” Constr. Build. Mater., 122(Sep), 126–139.
Masoud, S., Soudki, K., and Topper, T. (2001). “CFRP-strengthened and corroded RC beams under monotonic and fatigue loads.” J. Compos. Constr., 228–236.
MATLAB [Computer software]. MathWorks, Natick, MA.
Monti, G., Renzelli, M., and Luciani, P. (2003). “FRP adhesion in uncracked and cracked concrete zones.” Proc., 6th Int. Symp. on FRP Reinforcement for Concrete Structures (FRPRCS-6), World Scientific, Singapore, 183–192.
Oudah, F., and El-Hacha, R. (2013a). “Analytical fatigue prediction model of RC beams strengthened in flexure using prestressed FRP reinforcement.” Eng. Struct., 46, 172–183.
Oudah, F., and El-Hacha, R. (2013b). “Research progress on the fatigue performance of RC beams strengthened in flexure using fiber reinforced polymers.” Composites Part B, 47, 82–95.
Papakonstantinou, C., Petrou, M., and Harries, K. (2001). “Fatigue behavior of RC beams strengthened with GFRP sheets.” J. Compos. Constr., 246–253.
Papanikos, P., Tserpes, K. I., and Pantelakis, S. (2003). “Modelling of fatigue damage progression and life of CFRP laminates.” Fatigue Fract. Eng. Mater. Struct., 26(1), 37–47.
Quattlebaum, J., Harries, K., and Petrou, M. (2005). “Comparison of three flexural retrofit systems under monotonic and fatigue loads.” J. Bridge Eng., 731–740.
Rahimi, H., and Hutchinson, A. (2001). “Concrete beams strengthened with externally bonded FRP plates.” J. Compos. Constr., 44–56.
Rosenboom, O., and Rizkalla, S. (2006). “Behavior of prestressed concrete strengthened with various CFRP systems subjected to fatigue loading.” J. Compos. Constr., 492–502.
Sayed, A. M., Wang, X., and Wu, Z. (2013). “Modeling of fatigue life of FRP-concrete interface.” Proc., 5th Int. Symp. on Innovation and Sustainability of Structures in Civil Engineering, Harbin Institute of Technology, China, 245–254.
Sebastian, M. (2001). “Significance of midspan debonding failure in FRP-plated concrete beams.” J. Struct. Eng., 792–798.
Shahawy, M., and Beitelman, T. (1999). “Static and fatigue performance of RC beams strengthened with CFRP laminates.” J. Struct. Eng., 613–621.
Toutanji, H., Zhao, L., Deng, Y., Zhang, Y., and Balaguru, P. (2006). “Cyclic behavior of RC beams strengthened with carbon fiber sheets bonded by inorganic matrix.” J. Mater. Civ. Eng., 28–35.
Wahab, N., Soudki, K., and Topper, T. (2011). “Mechanics of bond fatigue behavior of concrete beams strengthened with NSM CFRP rods.” J. Compos. Constr., 934–942.
Wang, J. (2006). “Cohesive zone model of intermediate crack-induced debonding of FRP-plated concrete beam.” Int. J. Solids Struct., 43(21), 6630–6648.
Wang, X., Sayed, A., and Wu, Z. (2015). “Modeling of the flexural fatigue capacity of RC beams strengthened with FRP sheets based on finite-element simulation.” J. Struct. Eng., 1–16.
Wu, Z., Wang, X., Iwashita, K., Sasaki, T., and Hamaguchi, Y. (2010). “Tensile fatigue behaviour of FRP and hybrid FRP sheets.” Composites Part B, 41(5), 396–402.
Yun, Y., Wu, Y.-F., and Tang, W. C. (2008). “Performance of FRP bonding systems under fatigue loading.” Eng. Struct., 30(11), 3129–3140.
Information & Authors
Information
Published In
Copyright
© 2017 American Society of Civil Engineers.
History
Received: Dec 1, 2016
Accepted: May 8, 2017
Published online: Aug 16, 2017
Published in print: Nov 1, 2017
Discussion open until: Jan 16, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.