Performance Comparison between Passive Negative-Stiffness Dampers and Active Control in Cable Vibration Mitigation
Publication: Journal of Bridge Engineering
Volume 22, Issue 9
Abstract
The installation of dampers close to cable anchorages is a common approach for stay-cable vibration mitigation. Inspired by the force-deformation relationship produced by actively controlled dampers, passive negative-stiffness dampers (NSDs) were proposed for stay cables in the past to achieve excellent vibration-control performance. However, a systematic comparison between passive NSDs and active control in cable vibration mitigation has rarely been reported in literature. This paper systematically compares vibration mitigation performances of a passive NSD to the performance of two active control methods, linear quadratic regulator (LQR) and output feedback control. The comparison indicates that a passive NSD can offer a stay cable with a high damping level comparable to that of LQR control. However, passive NSD will also decrease the modal frequencies of a stay cable, whereas LQR will increase the frequencies slightly. The dynamic response results also indicate that the active LQR control offers slightly better control performance than the passive NSD in various loading cases. The superiority of the LQR control over the passive NSD can be explained through an output feedback control approach. It is noteworthy that the NSD is regarded as more practical and reliable because it offers protection by completely passive means without the need for the feedback and actuation that are required in active control.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors are grateful for the financial support from the Research Grants Council of Hong Kong (Project PolyU 152222/14E) and the Innovation and Technology Commission of Hong Kong (Project ITS/344/14). The findings and opinions expressed in this paper are solely those of the authors and not necessarily the views of the sponsors.
References
Agrawal, A. K., and Yang, J. N. (1999). “Design of passive energy dissipation systems based on LQR control methods.” J. Intell. Mater. Syst. Struct., 10(12), 933–944.
Calise, A. J., and Moerder, D. D. (1985). “Optimal output feedback design of systems with ill-conditioned dynamics.” Automatica, 21(3), 271–276.
Chen, L., Sun, L., and Nagarajaiah, S. (2015). “Cable with discrete negative stiffness device and viscous damper: Passive realization and general characteristics.” Smart Struct. Syst., 15(3), 627–643.
Chen, L., Sun, L., and Nagarajaiah, S. (2016). “Cable vibration control with both lateral and rotational dampers attached at an intermediate location.” J. Sound Vib., 377, 38–57.
Chen, Z. Q., Wang, X. Y., Ko, J. M., Ni, Y. Q., Spencer, Jr., B. F., and Yang, G. (2003). “MR damping system on Dongting Lake cable-stayed bridge.” Proc., Smart Structures and Materials, International Society for Optics and Photonics, Bellingham, WA, 229–235.
Christenson, R. E., Spencer, Jr., B. F., and Johnson, E. A. (2006). “Experimental verification of smart cable damping.” J. Eng. Mech., 268–278.
Fujino, Y., and Hoang, N. (2008). “Design formulas for damping of a stay cable with a damper.” J. Struct. Eng., 269–278.
Geurts, C., Vrouwenvelder, T., Staalduinen, P., and Reusink, J. (1998). “Numerical modelling of rain-wind-induced vibration: Erasmus Bridge, Rotterdam.” Struct. Eng. Int., 8(2), 129–135.
Hoang, N., and Fujino, Y. (2007). “Analytical study on bending effects in a stay cable with a damper.” J. Eng. Mech., 1241–1246.
Hoang, N., and Fujino, Y. (2009). “Multi-mode control performance of nonlinear dampers in stay cable vibrations.” Struct. Control Health Monit., 16(7–8), 860–868.
Høgsberg, J. (2011). “The role of negative stiffness in semi-active control of magneto-rheological dampers.” Struct. Control Health Monit., 18(3), 289–304.
Hu, L., Li, L., and Gu, M. (2010). “Error assessment for spectral representation method in wind velocity field simulation.” J. Eng. Mech., 1090–1104.
Iemura, H., Igarashi, A., Pradono, M. H., and Kalantari, A. (2006). “Passive and semi-active pseudo negative stiffness control of highway bridge benchmark problem.” Proc., 2006 Structures Congress, ASCE, Reston, VA, 94–101.
Iemura, H., and Pradono, M. H. (2002). “Passive and semi-active seismic response control of a cable-stayed bridge.” J. Struct. Control, 9(3), 189–204.
Iemura, H., and Pradono, M. H. (2005). “Simple algorithm for semi-active seismic response control of cable-stayed bridges.” Earthquake Eng. Struct. Dyn., 34(4–5), 409–423.
Iemura, H., and Pradono, M. H. (2009). “Advances in the development of pseudo-negative-stiffness dampers for seismic response control.” Struct. Control Health Monit., 16(7–8), 784–799.
Johnson, E. A., Baker, G. A., Spencer, Jr., B. F., and Fujino, Y. (2000). “Mitigating stay cable oscillation using semiactive damping.” Proc., 7th Annual Int. Symp. on Smart Structures and Materials, International Society for Optics and Photonics, Bellingham, WA, 207–216.
Johnson, E. A., Baker, G. A., Spencer, Jr., B. F., and Fujino, Y. (2007). “Semiactive damping of stay cables.” J. Eng. Mech., 1–11.
Johnson, E. A., Christenson, R. E., and Spencer, Jr., B. F. (2003). “Semiactive damping of cables with sag.” Comput.-Aided Civ. Infrastruct. Eng., 18(2), 132–146.
Kovacs, I. (1982). “Zur frage der seilschwingungen und der seildämpfung.” Bautechnik, 59(10), 325–332.
Krenk, S. (2000). “Vibrations of a taut cable with an external damper.” J. Appl. Mech., 67(4), 772–776.
Krenk, S., and Høgsberg, J. R. (2005). “Damping of cables by a transverse force.” J. Eng. Mech., 340–348.
Lee, C. M., Goverdovskiy, V. N., and Temnikov, A. I. (2007). “Design of springs with ‘negative’ stiffness to improve vehicle driver vibration isolation.” J. Sound Vib., 302(4), 865–874.
Li, H., Liu, M., and Ou, J. (2008). “Negative stiffness characteristics of active and semi-active control systems for stay cables.” Struct. Control Health Monit., 15(2), 120–142.
Li, H., Liu, M., Ou, J. P., and Guan, X. C. (2005). “Design and analysis of magnetorheological dampers with intelligent control systems for stay cables.” Zhongguo Gonglu Xuebao (China J. Highway Transp.), 18(4), 37–41.
Main, J. A., and Jones, N. P. (2002a). “Free vibrations of taut cable with attached damper. I: Linear viscous damper.” J. Eng. Mech., 1062–1071.
Main, J. A., and Jones, N. P. (2002b). “Free vibrations of taut cable with attached damper. II: Nonlinear damper.” J. Eng. Mech., 1072–1081.
Mehrabi, A. B., and Tabatabai, H. (1998). “Unified finite difference formulation for free vibration of cables.” J. Struct. Eng., 1313–1322.
Nelder, J. A., and Mead, R. (1965). “A simplex method for function minimization.” Comput. J., 7(4), 308–313.
Ni, Y. Q., Chen, Y., Ko, J. M., and Cao, D. Q. (2002). “Neuro-control of cable vibration using semi-active magneto-rheological dampers.” Eng. Struct., 24(3), 295–307.
Pacheco, B. M., Fujino, Y., and Sulekh, A. (1993). “Estimation curve for modal damping in stay cables with viscous damper.” J. Struct. Eng., 1961–1979.
Pasala, D. T. R., Sarlis, A. A., Nagarajaiah, S., Reinhorn, A. M., Constantinou, M. C., and Taylor, D. (2013). “Adaptive negative stiffness: New structural modification approach for seismic protection.” J. Struct. Eng., 1112–1123.
Shen, W., and Zhu, S. (2015). “Harvesting energy via electromagnetic damper: Application to bridge stay cables.” J. Intell. Mater. Syst. Struct., 26(1), 3–19.
Shi, X., and Zhu, S. (2015). “Magnetic negative stiffness dampers.” Smart Mater. Struct., 24(7), 072002.
Shi, X., and Zhu, S. (2017). “Simulation and optimization of magnetic negative stiffness dampers.” Sens. Actuators, A, 259, 14–33.
Shi, X., Zhu, S., Li, J. Y., and Spencer, Jr., B. F. (2016). “Dynamic behavior of stay cables with passive negative stiffness dampers.” Smart Mater. Struct., 25(7), 075044.
Shi, X., Zhu, S., and Spencer, Jr., B. F. (2017). “Experimental study on passive negative stiffness damper for cable vibration mitigation.” J. Eng. Mech., 04017070.
Solari, G., and Carassale, L. (2000). “Modal transformation tools in structural dynamics and wind engineering.” Wind Struct., 3(4), 221–241.
Spencer, B., and Nagarajaiah, S. (2003). “State of the art of structural control.” J. Struct. Eng., 845–856.
Tabatabai, H., and Mehrabi, A. B. (2000). “Design of mechanical viscous dampers for stay cables.” J. Bridge Eng., 114–123.
Wang, Y. C., and Lakes, R. S. (2004). “Stable extremely-high-damping discrete viscoelastic systems due to negative stiffness elements.” Appl. Phys. Lett., 84(22), 4451–4453.
Weber, F., and Boston, C. (2011). “Clipped viscous damping with negative stiffness for semi-active cable damping.” Smart Mater. Struct., 20(4), 045007.
Weber, F., and Distl, H. (2015). “Semi-active damping with negative stiffness for multi-mode cable vibration mitigation: Approximate collocated control solution.” Smart Mater. Struct., 24(11), 115015.
Wu, W. J., and Cai, C. S. (2006). “Experimental study of magnetorheological dampers and application to cable vibration control.” J. Vib. Control, 12(1), 67–82.
Xu, Y. L., and Yu, Z. (1998). “Mitigation of three-dimensional vibration of inclined sag cable using disrete oil dampers—II. Application.” J. Sound Vib., 214(4), 675–693.
Yamaguchi, H., and Fujino, Y. (1998). “Stayed cable dynamics and its vibration control.” Bridge aerodynamics, A. Larsen and S. Esdahl, eds., Balkema, Rotterdam, Netherlands, 235–254.
Yoneda, M., and Maeda, K. I. (1989). “A study on practical estimation method for structural damping of stay cables with dampers.” Doboku Gakkai Ronbunshu, 1989(410), 455–458.
Yu, Z., and Xu, Y. L. (1998). “Mitigation of three-dimensional vibration of inclined sag cable using discrete oil dampers—I. Formulation.” J. Sound Vib., 214(4), 659–673.
Zhou, H. J., and Sun, L. M. (2013). “Damping of stay cable with passive-on magnetorheological dampers: A full-scale test.” Int. J. Civ. Eng., 11(3), 154–159.
Information & Authors
Information
Published In
Copyright
© 2017 American Society of Civil Engineers.
History
Received: Dec 15, 2016
Accepted: Mar 24, 2017
Published online: Jun 28, 2017
Published in print: Sep 1, 2017
Discussion open until: Nov 28, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.