Experimental Study of Thermal Effects on a Long-Span Suspension Bridge
Publication: Journal of Bridge Engineering
Volume 22, Issue 7
Abstract
Thermal performance analysis of long-span bridges is important for structural design and safety evaluation; however, its experimental investigation using measured field test data is still insufficient. In this article, 1-year monitoring data of a long-span suspension bridge have been processed to study the thermal effects on structural performance under operating conditions. First, long-term temperature and structural response data, including strain, displacements, and suspender frequency/force, were analyzed statistically for evaluating their correlations. Temperature distribution along the main girder in the longitudinal direction and the temperature gradient in the vertical direction were also analyzed. Statistical analysis results show that the temperature distribution along the girder in the longitudinal direction is nonuniform. The strain change of the lower deck is greater than that of the upper deck in a day. Second, a theoretical study regarding the thermal performance analysis was conducted to calculate structural vertical/longitudinal displacements and thermal-induced internal forces by using measured strains. The estimated displacements are comparable with those measured directly from displacement transducers installed on expansion joints and the global positioning system (GPS) installed on four sections of the girder under normal operating conditions.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This work was sponsored by the Chinese National Science Foundation (Grant 51578139). The first author appreciates the support from the Research Innovation Program for College Graduates of Jiangsu Province and the Fundamental Research Funds for the Central Universities (Grant KYLX15_0085).
References
Ansari, F. (2007). “Practical implementation of optical fiber sensors in civil structural health monitoring.” J. Intel. Mater. Syst. Struct., 18(8), 879–889.
Barr, P., Stanton, J., and Eberhard, M. (2005). “Effects of temperature variations on precast, prestressed concrete bridge girders.” J. Bridge Eng., 186–194.
Cai, C., Oghumu, S., and Meggers, D. (2009). “Finite-element modeling and development of equivalent properties for FRP bridge panels.” J. Bridge Eng., 112–121.
de Battista, N., Brownjohn, J. M. W., Hwee, P. T., and Koo, K. Y. (2015). “Measuring and modelling the thermal performance of the Tamar Suspension Bridge using a wireless sensor network.” Struct. Infrastruct. Eng., 11(2), 176–193.
Elbadry, M. M., and Ghali, A. (1983). “Temperature variations in concrete bridges.” J. Struct. Eng., 2355–2374.
Emanuel, J. H., and Hulsey, J. L. (1978). “Temperature distributions in composite bridges.” J. Struct. Div., 104(1), 65–78.
Kim, W., and Laman, J. A. (2010). “Integral abutment bridge response under thermal loading.” Eng. Struct., 32(6), 1495–1508.
Ko, J. M., and Ni, Y. Q. (2005). “Technology developments in structural health monitoring of large-scale bridges.” Eng. Struct., 27(12), 1715–1725.
LaFave, J., et al. (2016). “Numerical simulations of steel integral abutment bridges under thermal loading.” J. Bridge Eng., 04016061.
Liu, C., and DeWolf, J. (2007). “Effect of temperature on modal variability of a curved concrete bridge under ambient loads.” J. Struct. Eng., 1742–1751.
Moorty, S., and Roeder, C. (1992). “Temperature dependent bridge movements.” J. Struct. Eng., 1090–1105.
Ni, Y., Xia, H., Wong, K., and Ko, J. (2012). “In-service condition assessment of bridge deck using long-term monitoring data of strain response.” J. Bridge Eng., 876–885.
Peeters, B., and De Roeck, G. (2001). “One-year monitoring of the Z24-bridge: Environmental effects versus damage events.” Earthquake Eng. Struct. Dyn., 30(2), 149–171.
Roberts, C., Breen, J., and Cawrse, J. (2002). “Measurements of thermal gradients and their effects on segmental concrete bridge.” J. Bridge Eng., 166–184.
Tong, M., Tham, L., and Au, F. (2002). “Extreme thermal loading on steel bridges in tropical region.” J. Bridge Eng., 357–366.
Wu, Z. H., and Huang, N. E. (2009). “Ensemble empirical mode decomposition: a noise assisted data analysis method.” Adv. Adapt. Data Anal., 1(1), 1–41.
Xia, Q., Cheng, Y., Zhang, J., and Zhu, F. (2017). “In-service condition assessment of a long-span suspension bridge using temperature-induced strain data.” J. Bridge Eng., 04016124.
Xia, Y., Chen, B., Zhou, X. Q., and Xu, Y. L. (2013). “Field monitoring and numerical analysis of Tsing Ma Suspension Bridge temperature behavior.” Struct. Control Health Monit., 20(4), 560–575.
Xu, Y. L., Chen, B., Ng, C. L., Wong, K. Y., and Chan, W. Y. (2010). “Monitoring temperature effect on a long suspension bridge.” Struct. Control Health Monit., 17(6), 632–653.
Yang, J., Yang, G., Lu, H., and Yin, C. (2008). “Thermal stress calculation and analysis in steel bridge deck pavement.” Proc., Symp. on Pavement Mechanics and Materials, ASCE, Reston, VA, 146–154.
Zhang, J., et al. (2016). “Vibration and deformation monitoring of a long-span rigid-frame bridge with distributed long-gauge sensors.” J. Aerosp. Eng., B4016014.
Zhang, J., Prader, J., Grimmelsman, K., Moon, F., Aktan, A., and Shama, A. (2013). “Experimental vibration analysis for structural identification of a long-span suspension bridge.” J. Eng. Mech., 748–759.
Zhou, L., Xia, Y., Brownjohn, J., and Koo, K. (2016). “Temperature analysis of a long-span suspension bridge based on field monitoring and numerical simulation.” J. Bridge Eng., 04015027.
Information & Authors
Information
Published In
Copyright
© 2017 American Society of Civil Engineers.
History
Received: Apr 7, 2016
Accepted: Mar 8, 2017
Published online: May 10, 2017
Published in print: Jul 1, 2017
Discussion open until: Oct 10, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.