In-Service Condition Assessment of a Long-Span Suspension Bridge Using Temperature-Induced Strain Data
Publication: Journal of Bridge Engineering
Volume 22, Issue 3
Abstract
Monitoring data of civil structures mainly include load- and temperature-induced structural responses. Traditional damage-detection methods use vibration-based structure responses by eliminating temperature effects from the measured data. In this article, a new structural damage identification method using temperature-induced responses is proposed and applied to a long-span suspension bridge. The novelty of the method is that it derives the structural transfer function by taking temperature load variation and temperature-induced strains input–output data; thus, it is able to accurately reveal inherent structural characteristics, unlike traditional methods that use structural vibration responses from ambient testing. In the proposed method, the temperature-induced strain is separated from measured strain responses with ensemble empirical mode decomposition (EEMD) technology, and a Euclidean distance-based damage index is defined that uses temperature variations and temperature-induced strains for structural damage detection. Numerical analysis results successfully verify the feasibility of the proposed method, which was used to evaluate the condition of a long-span suspension bridge before and after a ship collision with the use of the monitoring data. The performance of the bridge under normal operating conditions was also evaluated through the proposed method with the use of long-term monitoring data, including temperatures and strains.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This work was financially sponsored by the National High-Tech R&D Program of China (Grant 2014AA110401). The first author appreciates the support from the Research Innovation Program for College Graduates of Jiangsu Province and the Fundamental Research Funds for the Central Universities (Grant KYLX15-0085). Dr. Yufeng Zhang of Jiangsu Transportation Research Institute is greatly appreciated for providing the monitoring data of the Jiangyin Bridge.
References
Aied, H., González, A., and Cantero, D. (2016). “Identification of sudden stiffness changes in the acceleration response of a bridge to moving loads using ensemble empirical mode decomposition.” Mech. Syst. Sig. Process., 66–67, 314–338.
Aktan, A., Catbas, F., Grimmelsman, K., and Tsikos, C. (2000). “Issues in infrastructure health monitoring for management.” J. Eng. Mech., 711–724.
Al-Rahmani, A., Rasheed, H., and Najjar, Y. (2013). “Intelligent damage detection in bridge girders: Hybrid approach.” J. Eng. Mech., 296–304.
ANSYS 14.5 [Computer software]. Canonsburg, PA, ANSYS.
Bagchi, A., Humar, J., Xu, P., and Noman, A. S. (2010). “Model-based damage identification in a continuous bridge using vibration data.” J. Perform. Constr. Facil., 148–158.
Brownjohn, J. W., Stefano, A., Xu, Y. L., Wenzel, H., and Aktan, A. E. (2011). “Vibration-based monitoring of civil infrastructure: Challenges and successes.” J. Civ. Struct. Health Monit., 1(3–4), 79–95.
Catbas, F. N., Brown, D. L., and Aktan, A. E. (2006). “Use of modal flexibility for damage detection and condition assessment: Case studies and demonstrations on large structures.” J. Struct. Eng., 1699–1712.
Catbas, F. N., Susoy, M., and Frangopol, D. M. (2008). “Structural health monitoring and reliability estimation: Long span truss bridge application with environmental monitoring data.” Eng. Struct., 30(9), 2347–2359.
Dilger, W., Ghali, A., Chan, M., Cheung, M., and Maes, M. (1983). “Temperature stresses in composite box girder bridges.” J. Struct. Eng., 1460–1478.
Kim, W., and Laman, J. A. (2010). “Integral abutment bridge response under thermal loading.” Eng. Struct., 32(6), 1495–1508.
Laory, I., Westgate, R. J., Brownjohn, J. M. W., and Smith, I. F. C. (2013). “Temperature variations as load cases for structural identification.” Proc., 6th Int. Conf. on Structural Health Monitoring of Intelligent Infrastructure, International Society for Structural Health Monitoring of Intelligent Infrastructure, Hong Kong.
Lei, Y., Jiang, Y. Q., and Xu, Z. Q. (2012). “Structural damage detection with limited input and output measurement signals.” Mech. Syst. Sig. Process., 28, 229–243.
Liu, C., and DeWolf, J. (2007). “Effect of temperature on modal variability of a curved concrete bridge under ambient loads.” J. Struct. Eng., 1742–1751.
MOT (Ministry of Transportation). (2004). “General code for design of highway bridges and culverts.” JTG D60-2004, Beijing.
Ni, Y. Q., Hua, X. G., and Fan, K. Q. (2005). “Correlating modal properties with temperature using long-term monitoring data and support vector machine technique.” Eng. Struct., 27(12), 1762–1773.
Ni, Y. Q., Xia, H. W., Wong, K. Y., and Ko, J. M. (2012). “In-service condition assessment of bridge deck using long-term monitoring data of strain response.” J. Bridge Eng., 876–885.
Oh, C. K., and Sohn, H. (2009). “Damage diagnosis under environmental and operational variations using unsupervised support vector machine.” J. Sound Vib., 325(1–2), 224–239.
Peeters, B., and De Roeck, G. (2001). “One-year monitoring of the Z24 Bridge: Environmental effects versus damage events.” Earthquake Eng. Struct. Dyn., 30(2), 149–171.
Rezaei, D., and Taheri, F. (2009). “Experimental validation of a novel structural damage detection method based on empirical mode decomposition.” Smart Mater. Struct., 18(4), 1–14.
Rucka, M., and Wilde, K. (2006). “Application of continuous wavelet transform in vibration based damage detection method for beams and plates.” J. Sound Vib., 297(3–5), 536–550.
Seo, J., Hu, J. W., and Lee, J. (2015). “Summary review of structural health monitoring applications for highway bridges.” J. Perform. Constr. Facil.,.
Sohn, H., Worden, K., and Farrar, C. R. (2002). “Statistical damage classification under changing environmental and operational conditions.” J. Intell. Mater. Syst. Struct., 13(9), 561–574.
Vanlanduit, S., Parloo, E., Cauberghe, B., Guillaume, P., and Verboven, P. (2005). “A robust singular value decomposition for damage detection under changing operating conditions and structural uncertainties.” J. Sound Vib., 284(3–5), 1033–1050.
Westgate, R., Koo, K., and Brownjohn, J. (2014). “Effect of solar radiation on suspension bridge.” J. Bridge Eng, 04014077.
Wu, Z. H., and Huang, N. E. (2009). “Ensemble empirical mode decomposition: A noise-assisted data analysis method.” Adv. Adapt. Data Anal., 1(1), 1–41.
Xu, Y. L., and Chen, J. (2004). “Structural damage detection using empirical mode decomposition: Experimental investigation.” J. Eng. Mech., 1279–1288.
Yan, A. M., Kerschen, G., De Boe, P., and Golinval, J. C. (2005). “Structural damage diagnosis under varying environmental conditions—Part I: A linear analysis.” Mech. Syst. Sig. Process., 19(4), 847–864.
Yarnold, M. T., and Moon, F. L. (2015). “Temperature-based structural health monitoring baseline for long-span bridges.” Eng. Struct., 86, 157–167.
Zhang, J., Cheng, Y. Y., Xia, Q., and Wu, Z. S. (2015). “Change localization of a steel stringer bridge through long-gauge strain measurements.” J. Bridge Eng.,.
Zhang, J., Prader, J., Grimmelsman, K. A., Moon, F., Aktan, A. E., and Shama, A. (2013). “Experimental vibration analysis for structural identification of a long-span suspension bridge.” J. Eng. Mech., 748–759.
Information & Authors
Information
Published In
Copyright
© 2016 American Society of Civil Engineers.
History
Received: Mar 9, 2016
Accepted: Aug 30, 2016
Published online: Oct 26, 2016
Published in print: Mar 1, 2017
Discussion open until: Mar 26, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.