Laboratory Evaluation of Ultrahigh-Performance Concrete Shear Key for Prestressed Adjacent Precast Concrete Box Girder Bridges
Publication: Journal of Bridge Engineering
Volume 22, Issue 2
Abstract
Precast adjacent box girder bridges have become a preferred solution in several states due to their simple structure, economy, and ease of construction. However, longitudinal cracks often appear along the shear keys between adjacent box girders. With its superior strength and durability, ultrahigh-performance concrete (UHPC) has been used as an alternative grout material to reduce shear key cracking and enhance load transfer. The objective of the present research was to evaluate the performance of UHPC in shear keys using direct shear, direct tension, and flexural tests. Also, this study determined the effectiveness and functionality of shear reinforcement bars by applying direct shear load on specimens with shear reinforcement. In the direct shear test, a steel frame was placed around the specimens to allow the shear key to experience pure shear force. The direct shear test established the cracking threshold and ultimate shear strength of each shear key with and without shear reinforcement bars. The test results show that the average maximum shear capacity for the UHPC shear key without shear reinforcement bars exceeded that determined from past research for any grout material and any shear key configuration. Furthermore, the average maximum shear capacity increased by a factor of 1.81 with shear reinforcement bars. The enhanced shear strength of the UHPC shear key may have an impact on the analysis and design of UHPC connections in bridges.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors thank the FHWA TFHRC for assistance with this research and Lafarge North America for providing the UHPC.
References
AASHTO. (2012). AASHTO LRFD bridge design specifications, 6th Ed., Washington, DC.
ACI (American Concrete Institute). (2011). “Building code requirements for structural concrete and commentary.” ACI 318R-11, Farmington Hills, MI.
AFGC (Association Française de Génie Civil). (2002). Ultra-high performance fiber-reinforced concrete interim recommendations, Paris.
ASTM. (2004).“Standard test method for splitting tensile strength of cylindrical concrete specimens.” C496/C496M-11, West Conshohocken, PA.
ASTM. (2010). “Standard test method for flexural strength of concrete (using simple beam with third-point loading).” C78/C78M-10, West Conshohocken, PA.
ASTM. (2014a). “Standard practice for making and curing concrete test specimens in the laboratory.” C192/C192M-14, West Conshohocken, PA.
ASTM. (2014b). “Standard test method for compressive strength of cylindrical concrete specimens.” C39/C39M-14a, West Conshohocken, PA.
EI-Remaily, A., Tadros, M. K., Yamane, T., and Krause, G. (1996). “Transverse design of adjacent precast prestressed concrete box girder bridges.” PCI J., 41(4), 96–113.
Frosch, R. J., Blackman, D. T., and Radabaugh, R. D. (2003). “Investigation of bridge deck cracking in various bridge superstructure systems.” Rep. No. FHWA/IN/JTRP-2002/25, Indiana Dept. of Transportation, Indianapolis.
Fu, C. C., Pan, Z., and Ahmed, M. S. (2011). “Transverse posttensioning design of adjacent precast solid multibeam bridges.” J. Perform. Constr. Facil., 223–230.
Grace, N. F., Jensen, E. A., Enomoto, T., Matsagar, V. A., Soliman, E. M., and Hanson, J. Q. (2010). “Transverse diaphragms and unbonded CFRP post-tensioning in box-beam bridges.” PCI J., 55(2), 109–122.
Grace, N., Ushijima, K., Baah, P., and Bebawy, M. (2013). “Flexural behavior of a carbon fiber–reinforced polymer prestressed decked bulb T-beam bridge system.” J. Compos. Constr., 17(4), 497–506.
Graybeal, B. A. (2006). “Material property characterization of ultra-high performance concrete.” Rep. No. FHWA-HRT-06-103, Federal Highway Administration, Washington, DC.
Graybeal, B. A. (2010).“Behavior of field-cast ultra-high performance concrete bridge deck connections under cyclic and static structural loading.” Rep. No. FHWA-HRT-11-023, Federal Highway Administration, Washington, DC.
Graybeal, B. A. (2014). “Design and construction of field-cast UHPC connections.” Rep. No. No. FHWA-HRT-14-084, Federal Highway Administration, Washington, DC.
Gulyas, R. J., and Champa, J. T. (1997). “Use of composite testing for evaluating of keyway grout for precast prestressed bridge beams.” ACI Mater. J., 94(3), 244–250.
Gulyas, R. J., Wirthlin, G. J., and Champa, J. T. (1995). “Evaluation of keyway grout test methods for precast concrete bridges.” PCI J., 40(1), 44–57.
Hanna, K. E., Morcous, G., and Tadros, M. K. (2009). “Transverse post-tensioning design and detailing of precast-prestressed concrete adjacent box-girder bridges.” PCI J., 54(4), 160–174.
Hussein, H. H., Walsh, K. K., Sargand, S. M., and Steinberg, E. P. (2016). “Interfacial properties of ultrahigh-performance concrete and high-strength concrete bridge connections.” J. Mater. Civ. Eng., 04015208.
Issa, M. A., and Abdalla, H. A. (2007). “Structural behavior of single key joints in precast concrete segmental bridges.” J. Bridge Eng., 315–324.
Issa, M. A., Ribeiro, D. O., Valle, C. L., Abdalla, H. A., Shahid Islam, P., and Issa, M. A. (2003). “Performance of transverse joint grout materials in full-depth precast concrete bridge deck systems.” PCI J., 48(4), 92–103.
Miller, R. A., Hlavacs, G. M., Long, T., and Greuel, A. (1999). “Full-scale testing of shear keys for adjacent box girder bridges.” PCI J., 44(6), 80–90.
ODOT (Ohio Department of Transportation). (2013). “Ohio construction and material specifications.” Office of Structural Engineering, Columbus, OH.
Perry, V. H., and Mathew Royce, P. E. (2010). “Innovative field-cast UHPC joints for precast bridge decks (side-by-side deck bulb-tees), Village of Lyons, New York: Design, prototyping, testing and construction.” Proc., 3rd Int. fib Congress Incorporating the PCI Annual Convention and Bridge Conf., Vol. 1, Precast Prestressed Concrete Institute, Chicago, 1054–1066.
Perry, V. H., and Seibert, P. J. (2008). “The use of UHPFRC (Ductal) for bridges in North America: The technology, applications and challenges facing commercialization.” Proc., 2nd Int. Symp. on Ultra-High Performance Concrete, E. Fehling, S. Michael, and S. Stürwald, eds., Kassel Univ. Press, Kassel, Germany, 815–822.
Perry, V., and Weiss, G. (2009). “Innovative field cast UHPC joints for precast bridge decks Design, prototype testing and projects.” Proc., Int. Workshop of Designing and Building with Ultra-High Performance Fibre-Reinforced Concrete (UHPFRC): State of the Art and Development, F. Toutlemonde and J. Resplendino, eds., Wiley, Hoboken, NJ, 421–436.
Porter, S. D., Logan Julander, J., Halling, M. W., and Barr, P. J. (2012). “Shear testing of precast bridge deck panel transverse connections.” J. Perform. Constr. Facil., 462–468.
Rajlic, B., Murray, P., Dykstra, D., and Krisciunas, R. (2010). “The Eagle River Bridge superstructure replacement.” Proc., 8th Int. Conf. on Short and Medium Span Bridges, Canadian Society for Civil Engineering, Montreal, 105–109.
Russell, H. G. (2009). Adjacent precast concrete box beam bridges: Connection details, Transportation Research Board, Washington, DC.
Russell, H. G. (2011). “Adjacent precast concrete box-beam bridges: State of the practice.” PCI J., 56(1), 75–91.
Russell, H. G., and Graybeal, B. A. (2013). “Ultra-high performance concrete: a state-of-the-art report for the bridge community.” Rep. No. FHWA-HRT-13-060, Federal Highway Administration, Washington, DC.
Santos, P., and Júlio, E. N. (2012). “A state-of-the-art review on shear-friction.” Eng. Struct., 45, 435–448.
Shi, C., Wu, Z., Xiao, J., Wang, D., Huang, Z., and Fang, Z. (2015). “A review on ultra-high performance concrete: Part I. Raw materials and mixture design.” Constr. Build. Mater., 101, 741–751.
Steinberg, E., Semendary, A., and Walsh, K. (2015). “Adjacent precast box beam bridges: Using UHPC longitudinal joints.” Constr. Specifier, 68(8): 28–42.
Swenty, M., and Graybeal, B. (2012).“Influence of differential deflection on staged construction deck-level connections.” FHWA, U.S. Dept. of Transportation, Rep. No. FHWAHRT-12-057, National Technical Information Service Accession No. PB2012-111528, Federal Highway Administration, U.S. Dept. of Transportation, Washington, DC.
Voo, Y. L., Foster, S. J., and Voo, C. C. (2014). “Ultrahigh-performance concrete segmental bridge technology: Toward sustainable bridge construction.” J. Bridge Eng., B5014001.
Wang, D., Shi, C., Wu, Z., Xiao, J., Huang, Z., and Fang, Z. (2015). “A review on ultra-high performance concrete: Part II. Hydration, microstructure and properties.” Constr. Build. Mater., 96, 368–377.
Yuan, J., and Graybeal, B. A. (2014). “Bond behavior of reinforcing steel in ultra-high performance concrete.” Rep. No. FHWA-HRT-14-090, Federal Highway Administration, Washington, DC.
Yuan, J., and Graybeal, B. (2015). “Bond of reinforcement in ultra-high-performance concrete.” ACI Struct. J., 112(6), 851–860.
Zilch, K., and Reinecke, R. (2000). “Capacity of shear joints between high-strength precast elements and normal-strength cast-in-place decks.” PCI/FHWA/FIB Int. Symp. on High Performance Concrete, Precast/Prestressed Concrete Institute, Chicago.
Information & Authors
Information
Published In
Journal of Bridge Engineering
Volume 22 • Issue 2 • February 2017
Copyright
© 2016 American Society of Civil Engineers.
History
Received: Apr 5, 2016
Accepted: Jul 11, 2016
Published online: Sep 15, 2016
Published in print: Feb 1, 2017
Discussion open until: Feb 15, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.