Analytical Model for Frictional Resistance between Cable and Saddle of Suspension Bridges Equipped with Vertical Friction Plates
Publication: Journal of Bridge Engineering
Volume 22, Issue 1
Abstract
For multispan suspension bridges, frictional resistance between the main cables and the saddles is essential for counterpoising unbalanced cable tension between different spans. The use of friction plates in saddles is one of the most common methods for increasing frictional resistance, and the corresponding evaluation method is vital for the design of suspension bridges. In this study, an analytical model for the calculation of frictional resistance between cables and saddles is presented. Large-scale model tests were performed to simulate the realistic friction conditions of a typical multispan suspension bridge in China, namely the Yingwuzhou Yangtze River Bridge, to validate the model. The main components of frictional resistance were analyzed, and the effects of vertical friction plates in enhancing frictional resistance were investigated by model tests and theoretical analyses. The results indicate that the presented analytical model provides an effective and feasible tool for evaluating the total frictional resistance and the contribution of friction plates in practice. The main components of total frictional resistance, including the frictions at the base and side contact interfaces between the cable and the saddle trough, are quantified, proving the former to be dominant. The parameter analyses reveal that the frictional resistance can be increased by 57% by incorporating six vertical friction plates for the actual saddle.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This study was funded by the Fundamental Research Funds for the Central Universities under Grant 2682014CX078, the National Science and Technology Support Program of China under Grant 2011BAG07B03, and the National Natural Science Foundation of China under Grants 50908192, 51178394, and 51578455.
References
Fukuda, T. (1975). “Multi-span suspension bridges under torsional loading.” Proc. Jpn. Soc. Civ. Eng., 1975(242), 91–103.
Gautschi, W. (2012). Numerical analysis, 2nd Ed., Birkhäuser, Boston.
Gimsing, N. J. (2012). Cable supported bridges: Concept and design, 3rd Ed., Wiley, New York.
Hasegawa, K., Kojima, H., Sasaki, M., and Takena, K. (1989). “An experimental investigation on friction between cable and saddle of suspension bridge.” Doboku Gakkai Ronbunshuu, 404, 277–286 (in Japanese).
Hasegawa, K., Kojima, H., Sasaki, M., and Takena, K. (1995). “Frictional resistance between cable and saddle equipped with friction plate.” J. Struct. Eng., 1–14.
Ji, L., Chen, C., and Feng, Z. (2007). “A study on slip resistance between main cable and saddle on middle tower of three-tower suspension bridge.” Highway, 6, 1–5 (in Chinese).
Klein, C. K. (1983). Granular structural mechanics, China Railway Press, Beijing (in Chinese).
Li, Q., Zhou, L., Cheng, W., and Tang, L. (2006). “Report on frictional resistance between cable and saddle for Taizhou Yangtze River highway bridge.” Rep. No. SWJTU-TZB01, Southwest Jiaotong Univ., Chengdu, China (in Chinese).
Nazir, C. (1986). “Multi-span balanced suspension bridge.” J. Struct. Eng., 2512–2527.
Perfilyev, V., Moshkovich, A., Lapsker, I., Laikhtman, A., and Rapoport, L. (2014). “Dislocation structure and stick-slip phenomenon.” Tribol. Lett., 55(2), 295–301.
Rabinowicz, E. (1951). “The nature of the static and kinetic coefficients of friction.” J. Appl. Phys., 22, 1373–1379.
Takena, K., Sasaki, M., Hata, K., and Hasegawa, K. (1992). “Slip behavior of cable against saddle in suspension bridges.” J. Struct. Eng., 377–391.
Thai, H. T., and Choi, D. H. (2013). “Advanced analysis of multi-span suspension bridges.” J. Constr. Steel Res., 90, 29–41.
Xiao, R. (2013). Bridge structural systems, China Communications Press, Beijing (in Chinese).
Xu, G., and Deng, H. (2004). “Design of Yangluo Yangtze River Bridge in Wuhan.” Highway, 10, 1–6 (in Chinese).
Yoshida, O., Okuda, M., and Moriya, T. (2004). “Structural characteristics and applicability of four-span suspension bridge.” J. Bridge Eng., 453–463.
Zhang, Q., and Li, Q. (2013). “Studies on cable-saddle frictional characteristics for long-span suspension bridges.” China Civ. Eng. J., 46(4), 85–92 (in Chinese).
Zhang, Q., Li, Q., and Zhou, L. (2014). “Theoretical analysis of cable-saddle friction characteristics for suspension bridges.” J. Highway Transp., 27(1), 44–50 (in Chinese).
Information & Authors
Information
Published In
Copyright
© 2016 American Society of Civil Engineers.
History
Received: Mar 2, 2016
Accepted: Jul 8, 2016
Published online: Aug 30, 2016
Published in print: Jan 1, 2017
Discussion open until: Jan 30, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.