Design and Constructability of Spread Slab-Beam Bridges
Publication: Journal of Bridge Engineering
Volume 21, Issue 12
Abstract
A new bridge type called a spread slab-beam bridge was developed recently by using the same concept as that used for spread box beam bridges, in which the beams are spaced apart. This paper presents an evaluation of the new bridge system in terms of design and constructability and investigates the challenges encountered during construction. Forty-four bridge geometries were designed by using standard Texas DOT (TxDOT) slab-beam types to determine the feasible design space. One of the most aggressive geometries with widely spaced slab beams was constructed at full scale. On the basis of the research findings, it was concluded that spread slab beams with a topped panelized deck provide a viable construction method for short-span bridges. Results of a shear-design check show that the standard interface shear reinforcement must be doubled for the first quarter of the span length for more aggressive designs. Larger-than-expected camber of the precast slab beams might cause construction challenges and delays. A 30% increase in standard camber estimates can be used for construction purposes. High differential temperatures together with drying shrinkage might lead to early-age longitudinal deck cracking. Care should be taken during concrete curing to avoid factors that contribute to large temperature changes in the deck.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This research was supported by the TxDOT and Federal Highway Administration as part of TxDOT Project 0-6722. The authors are grateful to the TxDOT project monitoring committee, which provided invaluable assistance. The support of the Texas A&M Transportation Institute (TTI) is also greatly appreciated, as are all the students and the TTI Riverside construction crew who helped with the construction and testing.
References
AASHTO. (2007). AASHTO LRFD bridge design specifications, Washington, DC.
AASHTO. (2012). AASHTO LRFD Bridge Design Specifications, Washington, DC.
ACI (American Concrete Institute). (2008). “Building code requirements for structural concrete and commentary.” ACI 318-08, Farmington Hills, MI.
ACI (American Concrete Institute). (2014). “Building code requirements for structural concrete and commentary.” ACI 318-14, Farmington Hills, MI.
Hueste, M. D., Mander, J. B., Terzioglu, T., Jiang, D., and Petersen-Gauthier, J. (2015). “Spread prestressed concrete slab beam bridges.” Research Rep. No. FHWA/TX-15/0-6722-1, Texas A&M Transportation Institute and Texas Dept. of Transportation, Austin, TX.
Kovach, J. D., and Naito, C. (2008). Horizontal shear capacity of composite concrete beams without interface ties, ATLSS, Lehigh Univ., Bethlehem, PA.
Martin, L. D. (1977). “A rational method for estimating camber and deflection of precast prestressed members.” PCI J., 100–108.
MATLAB R2015a [Computer software]. MathWorks, Inc., Natick, MA.
Naaman, A. E. (2004). Prestressed concrete analysis and design: Fundamentals, Techno Press, Ann Arbor, MI.
O'Moore, L., Baweja, D., and Dux, P. (2005). “Investigation of early age tensile stresses, shrinkage strains in pavements and standard drying shrinkage tests.” Proc., 22nd Biennial Conf., Concrete 05-Issues Opportunities Innovations, Concrete Institute of Australia, North Sydney NSW, Australia, 1–14.
Panak, J. J. (1982). “Economical precast concrete bridges.” FHWA-TX-83-08 + 226-1F Final Rep., FHWA and Texas Dept. of Highway & Public Transportation, Austin, TX.
PCI (Precast/Prestressed Concrete Institute). (2010). PCI design handbook, Chicago.
Peterman, R. J., and Ramirez, J. A. (1998). “Restraint moments in bridges with full-span prestressed concrete form panels.” PCI J., 43(1), 54–73.
Priestley, M. J. N. (1978). “Design of concrete bridges for temperature gradients.” ACI J., 75(23), 209–217.
Rosa, M. A., Stanton, J. F., and Eberhard, M. O. (2007). “Improving predictions for camber in precast, prestressed concrete bridge girders.” Research Rep. WA-RD 669.1, Research Office, Washington State Dept. of Transportation, Seattle.
TxDOT (Texas Department of Transportation). (2013). TxDOT Bridge Design Manual—LRFD, Texas Dept. of Transportation, Austin, TX 〈http://onlinemanuals.txdot.gov/txdotmanuals/lrf/lrf.pdf〉.
Waveru, R. N. (2015). Strength of horizontal shear reinforcement with limited development, D.Phil. dissertation, Univ. of Texas at Arlington, Arlington, TX.
William, G. W., Shoukry, S. N., and Riad, M. Y. (2005). “Early age cracking of reinforced concrete bridge decks.” Bridge Struct., 1(4), 379–396.
Information & Authors
Information
Published In
Copyright
© 2016 American Society of Civil Engineers.
History
Received: Dec 1, 2015
Accepted: May 10, 2016
Published online: Jul 11, 2016
Published in print: Dec 1, 2016
Discussion open until: Dec 11, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.