Influence of Footing Dimensions on Early-Age Temperature Development and Cracking in Concrete Footings
Publication: Journal of Bridge Engineering
Volume 20, Issue 3
Abstract
This article presents the findings of an investigation that used finite-element analysis to determine the influence of a concrete footing’s dimensions on its temperature development and cracking at early age. A three-dimensional finite-element model was used to predict temperatures in the footing and to assess cracking potential of the concrete. A parametric study consisting of 63 finite-element analyses was conducted on three different footing shapes: (1) a cubic shape, (2) a length:width:depth ratio of 4:4:1, and (3) a length:width:depth ratio of 4:2:1. Volume-to-surface area ratios () ranged from 0.33 to 4.0 m. The results showed that cracking potential does not depend on a footing’s dimensions when its is 1.3 m or greater. Rectangular footings that have the same but different shapes (dimensional proportions) developed a similar maximum temperature, a similar maximum temperature differential, and a similar minimum crack index under the same insulation condition. Smaller footings allowed slightly higher maximum temperature differential before thermal cracking occurred.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The author acknowledges the tremendous efforts of those who contributed to this project. Special thanks are given to Drs. Mang Tia and Adrian Lawrence for their assistance. The study was made possible by funding provided by FDOT.
References
American Concrete Institute (ACI). (2000). “Cement and concrete terminology.” ACI 116R-00, Farmington Hills, MI.
American Concrete Institute (ACI). (2005). “Guide to mass concrete.” ACI 207.1R-05, Farmington Hills, MI.
American Concrete Institute (ACI). (2007). “Report on thermal and volume change effects on cracking of mass concrete.” ACI 207.2R-07, Farmington Hills, MI.
DIANA 9.4.4 [Computer software]. Delft, Netherlands, TNO DIANA.
Do, T. A., Lawrence, A. M., Tia, M., and Bergin, J. M. (2013). “Importance of insulation at the bottom of mass concrete placed on soil with high groundwater.” Transportation Research Record 2342, Transportation Research Board, Washington, DC, 113–120.
Ferraro, C. C. (2009). “Determination of test methods for the prediction of the behavior of mass concrete.” Ph.D. dissertation, Univ. of Florida, Gainesville, FL.
Florida DOT (FDOT). (2009). FDOT structures manual, Tallahassee, FL.
Florida DOT (FDOT). (2010). Standard specifications for road and bridge construction, Tallahassee, FL.
Florida DOT (FDOT). (2013). Structures design guidelines: FDOT structures manual, Vol. 1, Tallahassee, FL.
Lawrence, A. M., Tia, M., Ferraro, C. C., and Bergin, M. (2012). “Effect of early age strength on cracking in mass concrete containing different supplementary cementitious materials: Experimental and finite-element investigation.” J. Mater. Civ. Eng., 362–372.
Tia, M., Ferraro, C., Lawrence, A., Smith, S., and Ochiai, E. (2010). “Development of design parameters for mass concrete using finite element analysis.” Final Rep. Prepared for FDOT, Univ. of Florida, Gainesville, FL.
Tia, M., Lawrence, A., Ferraro, C., Do, T. A., and Chen, Y. (2013). “Pilot project for maximum heat of mass concrete.” Final Rep. Prepared for FDOT, Univ. of Florida, Gainesville, FL.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Feb 28, 2014
Accepted: Aug 12, 2014
Published online: Sep 4, 2014
Published in print: Mar 1, 2015
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.