Damage Detection in Long Suspension Bridges Using Stress Influence Lines
Publication: Journal of Bridge Engineering
Volume 20, Issue 3
Abstract
Numerous long-span cable-supported bridges have been built throughout the world in recent years. These bridges begin to deteriorate once built and continuously accumulate damage during their long service life. The growing popularity of comprehensive structural health monitoring systems (SHMSs) in recently built long-span bridges has started a new trend of integrating SHMS and damage detection technology for real-time condition assessment of these bridges. This paper explores a novel damage detection technique based on stress influence lines (SILs) of bridge components and validates the efficacy of the technique through a case study of the Tsing Ma suspension bridge. A mathematical regularization method is first introduced to identify SILs based on the in situ measurement of train information and train-induced stress responses in local bridge components. Good agreement between the identified and baseline SILs demonstrates the effectiveness of the proposed identification method. Damage indexes based on SILs are subsequently proposed and applied to hypothetical damage scenarios in which one or two critical bridge components are subjected to severe damage. The comparison suggests that the first-order difference of SIL change is an accurate indicator of the damage location. Results of this study indicate that the proposed SIL-based method offers a promising real-time technique for damage localization in long-span cable-supported bridges equipped with comprehensive SHMSs.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors acknowledge financial support from the Hong Kong Research Grant Council (PolyU 5289/12E), the National Natural Science Foundation of China (NSFC-51108395 and NSFC-51208447), and the Fundamental Research Funds for the Central Universities (2012121032). The authors thank the Highways Department of Hong Kong for providing field measurement data. Any opinions and concluding remarks presented in this paper are entirely those of the authors.
References
AASHTO. (2010). AASHTO LRFD bridge design specifications, 5th Ed., Washington, DC.
AASHTO. (2011). The manual for bridge evaluation, 2nd Ed., Washington, DC.
Bernal, D. (2002). “Load vectors for damage localization.” J. Eng. Mech., 7–14.
Bernal, D. (2014). “Damage localization and quantification from the image of changes in flexibility.” J. Eng. Mech., 279–286.
Catbas, F. N., Zaurin, R., Gul, M., and Gokce, H. B. (2012). “Sensor networks, computer imaging, and unit influence lines for structural health monitoring: Case study for bridge load rating.” J. Bridge Eng., 662–670.
Chen, Z. W., Xu, Y. L., and Wong, K. Y. (2011). “Fatigue analysis of long-span suspension bridges under multiple loading: Case study.” Eng. Struct., 33(12), 3246–3256.
Chipperfield, A. J., and Fleming, P. J. (1995). “The MATLAB genetic algorithm toolbox.” Applied control techniques using MATLAB, Proc., IEE Colloquium, Vol. 10, Institution of Engineering and Technology (IET), London, 1–4.
Doebling, S. W., Farrar, C. R., and Prime, M. B. (1998). “A summary review of vibration-based damage identification methods.” Shock Vib. Digest, 30(2), 91–105.
Fan, W., and Qiao, P. (2011). “Vibration-based damage identification methods: A review and comparative study.” Struct. Health Monit., 10(1), 83–111.
Goldberg, D. E. (1989). Genetic algorithms in search, optimization and machine learning, Addison Wesley, Boston.
Heylen, W., Lammens, S., and Sas, P. P. (1998). Modal analysis theory and testing, Dept. of Mechanical Engineering, Catholic Univ. Leuven, Leuven, Belgium.
Hibbeler, R. C. (2009). Structural analysis, 7th Ed., Prentice Hall, Singapore.
Hua, X. G., Ni, Y. Q., Chen, Z. Q., and Ko, J. M. (2009). “Structural damage detection of cable-stayed bridges using changes in cable forces and model updating.” J. Struct. Eng., 1093–1106.
Huang, T. J., Liang, Z., and Lee, G. C. (1995). “Structural damage detection using energy transfer ratios (ETR).” Proc., 14th Int. Modal Analysis Conf., Society for Experimental Mechanics, Bethel, CT, 126–132.
Ko, J. M., Sun, Z. G., and Ni, Y. Q. (2002). “Multi-stage identification scheme for detecting damage in cable-stayed Kap Shui Mun Bridge.” Eng. Struct., 24(7), 857–868.
Liu, T. T., Xu, Y. L., Zhang, W. S., Wong, K. Y., Zhou, H. J., and Chan, K. W. Y. (2009). “Buffeting-induced stresses in a long suspension bridge: Structural health monitoring oriented stress analysis.” Wind Struct., 12(6), 479–504.
Maia, N. M. M., Silva, J. M. M., Almas, E. A. M., and Sampaio, R. P. C. (2003). “Damage detection in structures: From mode shape to frequency response function methods.” Mech. Syst. Sig. Process., 17(3), 489–498.
Pandey, A. K., and Biswas, M. (1994). “Damage detection in structures using changes in flexibility.” J. Sound Vib., 169(1), 3–17.
Sanayei, M., and Onipede, O. (1991). “Damage assessment of structures using static test data.” AIAA J., 29(7), 1174–1179.
Shenton, H. W., III, and Hu, X. (2006). “Damage identification based on dead load redistribution: Methodology.” J. Struct. Eng., 1254–1263.
Shi, Z. Y., and Law, S. S. (1998). “Structural damage localization from modal strain energy change.” J. Sound Vib., 218(5), 825–844.
Sim, S. H., Spencer, B. F., Jr., and Nagayama, T. (2011). “Multimetric sensing for structural damage detection.” J. Eng. Mech., 22–30.
Sohn, H., Farrar, C., Hunter, N. F., and Worden, K. (2001). “Structural health monitoring using statistical pattern recognition techniques.” J. Dyn. Syst. Meas. Contr., 123(4), 706–711.
Turer, A., Levi, A., and Aktan, A. E. (1998). Instrumentation, proof-testing and monitoring of three reinforced concrete deck-on-steel girder bridges prior to, during, and after superload, Cincinnati Infrastructure Institute, Cincinnati.
Vogel, C. R. (2002). Computational methods for inverse problems, Society for Industrial and Applied Mathematics, Philadelphia.
Wong, K. Y., Lau, C. K., and Flint, A. R. (2000). “Planning and implementation of the structural health monitoring system for cable-supported bridges in Hong Kong.” Proc., Nondestructive Evaluation of Highways, Utilities, and Pipelines IV, A. E. Aktan and S. R. Gosselin, eds., Vol. 3995, SPIE, Bellingham, WA, 266–275.
Wong, K. Y., Man, K. L., and Chan, W. Y. K. (2001). “Monitoring of wind load and response for cable-supported bridges in Hong Kong.” Proc., SPIE 6th Int. Symp. on NDE for Health Monitoring and Diagnostics, Health Monitoring and Management of Civil Infrastructure Systems, S. B. Chase and A. E. Aktan, eds., Vol. 4337, SPIE, Bellingham, WA, 292–303.
Xia, H., Xu, Y. L., and Chan, T. H. T. (2000). “Dynamic interaction of long suspension bridges with running trains.” J. Sound Vib., 237(2), 263–280.
Xu, Y. L., Ko, J. M., and Zhang, W. S. (1997). “Vibration studies of Tsing Ma Suspension Bridge.” J. Bridge Eng., 149–156.
Yeo, I., Shin, S., Lee, H. S., and Chang, S.-P. (2000). “Statistical damage assessment of framed structures from static responses.” J. Eng. Mech., 414–421.
Zaurin, R., and Catbas, F. N. (2010). “Integration of computer imaging and sensor data for structural health monitoring of bridges.” Smart Mater. Struct., 19(1), 1–15.
Zhao, L., and Shenton, H. W. (2005). “Structural damage detection using best approximated dead load redistribution.” Struct. Health Monit., 4(4), 319–339.
Zonta, D., Lanaro, A., and Zanon, P. (2003). “A strain-flexibility-based approach to damage location.” Key Eng. Mater., 245–246, 87–96.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Feb 17, 2013
Accepted: Jul 22, 2013
Published online: Sep 2, 2014
Published in print: Mar 1, 2015
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.