System-Level Deterioration Model for Reinforced Concrete Bridge Decks
Publication: Journal of Bridge Engineering
Volume 20, Issue 5
Abstract
Generally, in existing bridge management systems, the deterioration is modeled based on visual inspections where the corresponding condition states are assigned to individual elements. In this case, limited attention is given to the correlation between bridge elements from a structural perspective. In this process, the impact of the history of deterioration on the reliability of a structure is disregarded, as it may lead to inappropriate conclusions. The improved estimate of service life of a bridge deck may help decision makers enhance intervention planning and optimize life-cycle costs. The objective of this research is to evaluate the system reliability of conventional bridges that were designed based on existing codes. According to the methodology developed in this study, the predicted element-level structural conditions for different time intervals are applied in the nonlinear finite-element model of a bridge superstructure, and the system reliability indexes are estimated for different time intervals. This method has been applied in simply supported traditional RC bridge superstructures designed according to Canadian bridge design standards. Based on the reliability estimates, these conventional bridges designed based on the current codes are found to be in good condition during the initial stages of their service life, but their condition degrades faster once corrosion in steel reinforcements is initiated and spalling of concrete becomes evident. The system reliability deterioration model can be integrated into existing bridge management systems by replacing the existing condition index by the reliability index, or by adding it to the assessment process as an additional parameter.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The support of the Natural Sciences and Engineering Council of Canada (NSERC) is gratefully acknowledged.
References
AASHTO. (2004). LRFD bridge design specifications. Washington, DC.
Canadian Standards Association (CSA). (2004). “Design of concrete structures.” A23.3-04, Toronto.
Canadian Standards Association (CSA). (2006). “Canadian highway bridge design code (CHBDC).” CAN/CSA-S6-06, Toronto.
Cusson, D., Lounis, Z., and Daigle, L. (2011). “Durability monitoring for improved service life predictions of concrete bridge decks in corrosive environments.” Comput.-Aided Civ. Infrastruct. Eng., 26(7), 524–541.
Czarnecki, A. A., and Nowak, A. S. (2007). “Reliability-based evaluation of steel girder bridges.” Proc. ICE Bridge Eng., 160(1), 9–15.
DRAIN-2DX 1.10 [Computer software]. Berkeley, CA, National Information Service for Earthquake Engineering (NISEE).
Frangopol, D. M., and Neves, L. C. (2004). “Probabilistic life-cycle analysis of deteriorating structures under multiple performance constraints.” Proc., Structures Congress 2004: Building on the Past, Securing the Future, G. E. Blandford, ed., Structural Engineering Institute, ASCE, Reston, VA, 85–92.
Ghodoosi, F., Bagchi, A., and Zayed, T. (2012). “Reliability-based assessment of steel-free deck system bridges.” Proc., 91st Annual Meeting, Transportation Research Board, Washington, DC.
Grussing, M. N., Uzarski, D. R., and Marrano, L. R. (2006). “Condition and reliability prediction models using the Weibull probability distribution.” Proc., 9th Int. Conf. on Applications of Advanced Technology in Transportation (AATT), K. C. P. Wang, B. L. Smith, D. R. Uzarski, and S. C. Wong, eds., ASCE, Reston, VA, 19–24.
Kong, J. S., and Frangopol, D. M. (2003). “Life-cycle reliability-based maintenance cost optimization of deteriorating structures with emphasis on bridges.” J. Struct. Eng., 818–828.
Liu, Y., and Weyers, R. E. (1998). “Modeling the time-to-corrosion cracking in chloride contaminated reinforced concrete structures.” ACI Mater. J., 95(6), 675–681.
McDaniel, M., Celaya, M., and Nazarian, M. (2010). “Concrete bridge deck quality mapping with seismic methods: Case study in Texas.” Transportation Research Record 2202, Transportation Research Board, Washington, DC, 53–60.
Mirza, S. A., and MacGregor, J. G. (1979a). “Variability of mechanical properties of reinforcing bars.” J. Struct. Div., 105(5), 921–937.
Mirza, S. A., and MacGregor, J. G. (1979b). “Variations in dimensions of reinforced concrete members.” J. Struct. Div., 105(4), 751–766.
Miyamoto, A., Kawamura, K., and Nakamura, H. (2000). “Bridge management system and maintenance optimization for existing bridges.” J. Comput.-Aided Civ. Infrastruct. Eng., 15(1), 45–55.
Nowak, A. S. (1993). “Live load model for highway bridges.” J. Struct. Safety, 13(1–2), 53–66.
Nowak, A. S. (1995). “Calibration of LRFD bridge code.” J. Struct. Eng., 1245–1251.
Nowak, A. S. (1999). “Calibration of LRFD bridge design code.” NCHRP Rep. No. 368, Transportation Research Board, Washington, DC.
Nowak, A. S., and Collins, K. R. (2000). Reliability of structures, McGraw Hill, New York.
Oracle Crystal Ball 11.1.1 [Computer software]. Denver, Oracle.
Park, R., and Paulay, T. (1975). Reinforced concrete structures, Wiley, Hoboken, NJ.
Prakash, V., Powell, G. H., and Campbell, S. (1993). “Drain-2DX base program description and user guide, version 1.10.” Structural Engineering Mechanics and Materials Report No. UCB/SEMM-93-18, Univ. of California, Berkeley, CA.
Priestley, M. J. N., Seible, F., and Calvi, G. M. (1996). Seismic design and retrofit of bridges, Wiley, Hoboken, NJ.
SAP2000 15 [Computer software]. Berkeley, CA, Computers and Structures.
Stallings, J. M., and Yoo, C. H. (1992). “Analysis of slab-on-girder bridges.” Comput. Struct., 45(5–6), 875–880.
Stewart, M. G., and Rosowsky, D. V. (1998). “Structural safety and serviceability of concrete bridges subject to corrosion.” J. Infrastruct. Syst., 146–155.
Stewart, M. G., and Val, D. V. (1999). “Role of load history in reliability-based decision analysis of aging bridges.” J. Struct. Eng., 776–783.
Tabsh, S. W., and Aswad, A. (1997). “Statistics of high-strength concrete cylinders.” ACI Mater. J., 94(5), 361–364.
Thoft-Christensen, P. (1998). “Assessment of the reliability profiles for concrete bridges.” Eng. Struct., 20(11), 1004–1009.
Vu, K. T., and Stewart, M. G. (2000). “Structural reliability of concrete bridges including improved chloride- induced corrosion models.” Struct. Safety, 22(4), 313–333.
Vu, K. T., Stewart, M. G., and Mullard, J. (2005). “Corrosion-induced cracking: Experimental data and predictive models.” ACI Struct. J., 102(5), 2005719–2005726.
Wacker, J. P., and Groenier, J. S. (2010). “Comparative analysis of design codes for timber bridges in Canada, the United States, and Europe.” Transportation Research Record 2200, Transportation Research Board, Washington, DC, 163–168.
Weyers, R. E. (1998). “Service life model for concrete structures in chloride laden environments.” ACI Mater. J., 95(4), 445–453.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Sep 13, 2013
Accepted: Jun 25, 2014
Published online: Jul 29, 2014
Published in print: May 1, 2015
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.