Effect of Superstructure Temperature Changes on Intermediate Pier Foundation Stresses in Integral Abutment Bridges
Publication: Journal of Bridge Engineering
Volume 20, Issue 1
Abstract
Structural members that are restrained against motion can develop internal stresses when subjected to changes in temperature. The phenomenon of temperature-induced internal stresses in superstructure members of bridges has prompted the development of codified provisions for determining superstructure temperature load effects. The objective of this study, as a means of assessing the robustness of existing design provisions for a selected bridge case, was to quantify the effect that thermal stresses have on underlying foundation systems, such as intermediate bridge piers in integral abutment bridges. The objective was met by, in part, instrumenting a multispan integral abutment bridge with temperature and bridge response remote-monitoring devices. Data obtained from the remote-monitoring program are made available in graphical form to interested parties via real-time updates on a dedicated website. Simultaneous to the field-monitoring program, a detailed analytical study of the integral abutment bridge was undertaken. Through pairing of in-service field measurements with finite-element analysis of temperature loadings on the selected bridge, the contributions to foundation stresses associated with changes in temperature in the superstructure were quantified. Findings from this study support that available design provisions are capable of leading to conservative bridge foundation designs.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
Financial support for this study was provided by the Federal Highway Administration (FHWA) and KYTC. The authors thank Dr. Abheetha Peiris and Mr. Dan Eaton for their efforts in placing instrumentation.
References
AASHTO. (2012). AASHTO LRFD bridge design specifications, 6th Ed., Washington, DC.
Allen, J. J., Stokoe, K. H., Bueno, J. L., Kalinski, M. E., and Myers, M. L. (1999). “In-situ stiffness measurements of thick-life unbound aggregate bases.” Proc., Int. Center for Aggregates Research (ICAR) 7th Annual Symp., Aggregates Foundation for Technology, Research and Education, Alexandria, VA.
ANSYS 14 [Computer software]. Canonsburg, PA, ANSYS.
Arsoy, S., Barker, R. M., Duncan, J. M., and Via, C. E. (1999). The behavior of integral abutment bridges, Virginia Transportation Research Council, Charlottesville, VA.
Byerlee, J. (1978). “Friction of rocks.” Pure Appl. Geophys., 116(4–5), 615–626.
Cobb, F. (2009). Structural engineer’s pocket book, 2nd Ed., Butterworth-Heinemann, London.
Connal, J. (2004). “Integral abutment bridges: Australian and US practice.” 5th Austroads Bridge Conf., Bridges: Another Dimension, Austroads, Sydney, Australia.
Hawkins, A. B. (1986). Rock descriptions, site investigation practice: Assessing BS 5930, Geological Society, London.
H. C. Nutting (HCN). (2009). “KY 2541 bridge replacement over Little Sandy River.” Geotechnical Engineering Rep. Prepared for Kentucky Transportation Cabinet, Lexington, KY.
Hopkins, T. C., Beckham, T. L., and Sun, C. (2007). “Resilient modulus of compacted crushed stone aggregate bases.” Kentucky Transportation Center Research Rep. KTC-05-27/SPR-229-01-1F, Univ. of Kentucky, Lexington, KY.
Kentucky Department of Highways (KDH). (2002). “Elastomeric bearing pads for prestressed beams.” Standard Drawing, No. BBP-001-11, Kentucky Transportation Cabinet, Frankfort, KY.
Kentucky Transportation Cabinet (KYTC). (2005). Geotechnical guidance manual, Frankfort, KY.
Kentucky Transportation Center (KTC). (2013). “KY 100 Allen County Bridge.” Remote bridge monitoring in Kentucky, 〈http://www.ktc.uky.edu/kytc/RemoteBridgeMonitoringInKY/ky100Allen.html〉 (Oct. 25, 2013).
Kim, W., and Laman, J. A. (2010). “Integral abutment bridge response under thermal loading.” Eng. Struct., 32(6), 1495–1508.
Klieger, P. (1958). “Effect of mixing and curing temperature on concrete strength.” J. ACI, 54(6), 1063–1081.
Kuiper, J., Van Ryen, W. M. L., and Koefoed, O. (1959). “Laboratory determinations of elastic properties of some limestones.” Geophys. Prospect., 7(1), 38–44.
National Cooperative Highway Research Program (NCHRP). (2004). “Guide for mechanistic-empirical design of new and rehabilitated pavement structures. Part 4. Low volume roads.” NCHRP 1-37A, Washington, DC.
Paul, M., Laman, J. A., and Linzell, D. G. (2005). “Thermally induced superstructure stresses in prestressed girder integral abutment bridges.” Proc., 6th Int. Bridge Engineering Conf.: Reliability, Security, and Sustainability in Bridge Engineering, Transportation Research Board, Washington, DC, 287–297.
Podolny, W., Jr., and Muller, J. M. (1982). Construction and design of prestressed concrete segmental bridges, Wiley, New York.
Precast/Prestressed Concrete Institute (PCI). (2010). PCI design handbook: Precast and prestressed concrete, 7th Ed., Chicago.
Roeder, C. W. (2003). “Proposed design method for thermal bridge movements.” J. Bridge Eng., 12–19.
Schultz, A. E., Scheevel, C. J., and Morris, K. M. (2011). “Evaluation of AASHTO-LRFD design methods for thermal loads in fixed-flexible twin-walled R/C bridge piers.” J. Bridge Eng., 890–899.
Takayama, T., and Ikeda, N. (1992). “Estimation of sliding failure probability of present breakwaters for probabilistic design.” Rep. Port Harbour Res. Inst., 31(5), 3–32.
Theyse, H. L. (2002). “Stiffness, strength, and performance of unbound aggregate material: Application of South African HVS and laboratory results to California flexible pavements.” Pavement Research Center, Univ. of California–Davis, Davis, CA.
Turner, J. (2006). “Rock-socketed shafts for highway structure foundations.” NCHRP Synthesis 360, Washington, DC.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Dec 3, 2013
Accepted: Mar 31, 2014
Published online: May 12, 2014
Published in print: Jan 1, 2015
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.