Damping Properties of Highway Bridges in China
Publication: Journal of Bridge Engineering
Volume 19, Issue 5
Abstract
Full-scale data on the natural frequencies and the damping ratios of 114 highway bridges in China, and the dynamic characteristics monitoring data of four bridges under ambient excitation, have been collected and analyzed. The data indicate that the natural frequencies of the long-span bridges have power function relationships with the lengths of the main spans, whereas the damping ratios of the bridges scatter with the influence of the width of section, the piers, the material, the test environment, and the bridge type. Values of the damping ratios of different bridge types in China are proposed based on the collected data. With the increase in service ages, the natural frequencies of the bridges change little, whereas the damping ratios of the bridges decrease and tend toward stable after certain years. The forms of damage, the locations of damage, and the strengthening methods have a great influence on the changing of damping ratios.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors gratefully acknowledge the financial support of National Science Foundation of China (grant No. 51278038) and the data support of Research Institute of Highway Ministry of Transport in China and China Academy of Railway Sciences.
References
Brownjohn, J. M. W., Sevem, R. T., and Dumanoglu, A.A. (1992).“Full-scale dynamic testing of the second Bosporus suspension bridge.” Proc., Tenth World Conf. on Earthquake Engineering, Balkema, Rotterdam, Netherlands, 2695–2700.
CALTRANS. (2010). “Seismic design criteria.” SDC-2010, Sacramento, CA.
Casas, J. R. (1995). “Full-scale dynamic testing of the Alamillo cable-stayed bridge in Sevilla (Spain).” Earthquake Eng. Struct. Dyn., 24(1), 35–51.
Clough, R.W., and Penzien, J. (1995). Dynamics of structures. Computers & Structures, Inc., Berkeley, CA.
Crupi, V. (2008). “An unifying approach to assess the structural strength.” Int. J. Fatigue, 30(7), 1150–1159.
Curadelli, R. O., Riera, J. D., Ambrosini, D., and Amani, M. G. (2008). “Damage detection by means of structural damping identification.” Eng. Struct., 30(12), 3497–3504.
European Committee for Standardization. (2001). Eurocode 8: Design of structures for earthquake resistance, Brussels.
Fernstrom, E. V., Wank, T. R., and Grimmelsman, K. A. (2012). “A comparison of dynamic testing methods for evaluating a truss bridge.” Structures Congress 2012, ASCE, Reston, VA, 757–768.
Frandsen, J. B. (2001). “Simultaneous pressures and accelerations measured full-scale on the Great Belt East suspension bridge.” J. Wind Eng. Ind. Aerodyn., 89(1), 95–126.
Gonzalez, A., OBrien, E. J., and McGetrick, P. J. (2012). “Identification of damping in a bridge using a moving instrumented vehicle.” J. Sound Vibrat., 331(18), 4115–4131.
Magalhaes, F., Cunha, A., Caetano, E., and Brincker, R. (2010). “Damping estimation using free decays and ambient vibration tests.” Mech. Syst. Signal Process., 24(5), 1274–1290.
Montalvao, D., Ribeiro, A. M. R., and Durate-Silva, J. (2009). “A method for the localization of damage in a CFRP plate using damping.” Mech. Syst. Signal Process., 23(6), 1846–1854.
Myrvoll, F., Kaynia, A. M., Hjorth-Hansen, E., and Strømmen, E. (2002). “Full-scale dynamic performance testing of the bridge structure and the special cable friction dampers on the cable-stayed Uddevalla bridge.” Proc., 20th IMAC Conf. on Structural Dynamics, Society of Photo-optical Instrumentation Engineers (SPIE), Bellingham, WA, 657–662.
People’s Republic of China. (2004).“Wind-resistent design specification for highway bridges.” Industry standard, China Communication Press, Beijing.
People’s Republic of China. (2008).“Guidelines for seismic design of highway bridges.” Industry standard, China Communication Press, Beijing.
Salawu, O., and Williams, C. (1995). “Bridge assessment using forced-vibration testing.” J. Struct. Eng., 161–173.
Satake, N., Suda, K., Arakawa, T., Sasaki, A., and Tamura, Y. (2003). “Damping evaluation using full-scale data of buildings in Japan.” J. Struct. Eng., 470–477.
Siringoringo, D., Fujino, Y., Nagayama, T. (2013). “Dynamic characteristics of an overpass bridge in a full-scale destructive test.” J. Eng. Mech., 691–701.
Ulker-Kaustell, M., and Karoumi, R. (2011). “Application of the continuous wavelet transform on the free vibrations of a steel-concrete composite railway bridge.” Eng. Struct., 33(3), 911–919.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: May 20, 2013
Accepted: Nov 4, 2013
Published online: Jan 7, 2014
Published in print: May 1, 2014
Discussion open until: Jun 7, 2014
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.