Simplified Analysis for Preliminary Design of Towers in Suspension Bridges
Publication: Journal of Bridge Engineering
Volume 19, Issue 3
Abstract
This paper proposes an equivalent suspension bridge model for the preliminary design of support towers of suspension bridges. In this simplified model, the bridge is composed of its support towers, with equivalent springs replacing suspension cables and girders. An explicit formula for the spring stiffness was derived for the horizontal stiffness at the end of an inclined main cable and compared with Ernst’s formula as well as finite-element analysis results. For the analysis of the model, dead and live loads acting on the girders of each span were replaced with horizontal and vertical forces calculated using the deflection theory and placed on the tops of the support towers. Equilibrium equations were derived from free-body diagrams for each tower and their solutions were obtained from boundary conditions at the ends of the towers. This resulted in the formulation of nonlinear load-displacement equations in matrix form for the simplified bridge model. An example four-span suspension bridge was analyzed for displacements at the tops of the towers and moment reactions at the bottoms of the towers under six live-load cases. A comparison of the model predictions with a FEM analysis showed excellent agreement. The results prove that the proposed analysis method can be a useful alternative for the preliminary analysis and design of suspension bridge towers.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This work was a part of a research project supported by the Korean Ministry of Land, Transport and Maritime Affairs (MLTM) through Core Research Project 1 of the Super Long Span Bridge R&D Center. The authors express their gratitude for the financial support. This research was supported by the Basic Science Research Program through the National Research Foundation of Korea (NRF) funded by the Ministry of Education, Science and Technology (NRF-2012R1A1A2007054).
References
Cheng, J., and Xiao, R.-C. (2006). “A simplified method for lateral response analysis of suspension bridges under wind loads.” Commun. Numer. Methods Eng., 22(8), 861–874.
Choi, D.-H., Gwon, S.-G., Yoo, H., and Na, H.-S. (2013). “Nonlinear static analysis of continuous multi-span suspension bridges.” Int. J. Steel Struct., 13(1), 103–115.
Cobo del Arco, D., and Aparicio, A. C. (2001). “Preliminary static analysis of suspension bridges.” Eng. Struct., 23(9), 1096–1103.
Decan, Y. (2007). “Stiffness characteristics and geometric configurations of cable-supported bridges.” Proc., Int. Conf. on Transportation Engineering, ASCE, Reston, VA, 1096–1103.
Deng, Y., and He, X. (2010). “Seismic vulnerability analysis of long-span multi-tower suspension bridge.” Proc., Int. Conf. on Computational and Information Sciences, IEEE CPS, Washington, DC, 458–461.
Der Kiureghian, A., and Sackman, J. L. (2005). “Tangent geometric stiffness of inclined cables under self-weight.” J. Struct. Eng., 941–945.
ENVICO Consultants Company. (2010). The design report of the New Millennium Bridge, Seoul.
Ernst, H. J. (1965). “Der E-modul von seilen unter berucksichtigung des durchhanges.” Bauingenieur, 40(2), 52–55.
Gimsing, N. J. (1997). Cable supported bridges: Concept and design, 2nd Ed., Wiley, New York.
Grigorjeva, T., Juozapaitis, A., and Kamaitis, Z. (2010). “Static analysis and simplified design of suspension bridges having various rigidity of cables.” J. Civ. Eng. Manage., 16(3), 363–371.
Irvine, H. M. (1981). Cable structures, MIT University Press, Cambridge, MA.
Korean Ministry of Land Transport and Maritime Affairs (KMLTMA). (2005). Design specifications of Korean highway bridges, Seoul.
Lewis, W. J. (2003). Tension structures, Thomas Telford, London.
Malik, J. (2006). “Nonlinear models of suspension bridges.” J. Math. Anal. Appl., 321(2), 828–850.
MIDAS Information Technology Company. (2012). MIDAS Civil software program, Seoul.
Peterson, C. (1993). Stahlbau, 3rd Ed., Vieweg, Braunschweig, Germany (in German).
Rubin, H., and Vogel, U. (1982). “Baustatik ebener stabwerke.” Stahlbau handbuch, Stahlbau, Cologne, Germany, 196–206 (in German).
Ulstrup, C. C. (1993). “Rating and preliminary analysis of suspension bridges.” J. Bridge Eng., 2653–2679.
Wollmann, G. P. (2001). “Preliminary analysis of suspension bridges.” J. Bridge Eng., 227–233.
Yoshida, O., Okuda, M., and Moriya, T. (2004). “Structural characteristics and applicability of four-span suspension bridge.” J. Bridge Eng., 453–463.
Information & Authors
Information
Published In
Journal of Bridge Engineering
Volume 19 • Issue 3 • March 2014
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Oct 15, 2012
Accepted: Sep 6, 2013
Published online: Sep 9, 2013
Published in print: Mar 1, 2014
Discussion open until: May 4, 2014
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.