Curvature Monitoring of Beams Using Digital Image Correlation
Publication: Journal of Bridge Engineering
Volume 19, Issue 3
Abstract
A method for measuring longitudinal strains with the height at a section, and thus the curvature, using a technique based on digital image correlation (DIC), is presented. The background to this technique is introduced as well as previous work in this area. The accuracy of DIC under ideal conditions is established using artificially generated images that represent beams with various curvatures. The practical accuracy of DIC is established by comparing the strains measured using DIC to those predicted by elastic theory and measured using strain gauges for a steel beam. The correlation between these results is found to be excellent. DIC is then used to measure curvatures in RC beams and these results are compared with analytically predicted results with good agreement. The choice of an appropriate gauge length for RC is discussed and is shown to be one of the significant advantages of using DIC as opposed to strain gauges in both laboratory testing and field monitoring of bridge structures.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors acknowledge the Natural Science and Engineering Research Council of Canada for their support of this research. The authors also thank Danielle DeRosa, Adam Hoag, Keelin Scully, Neil Porter, and Paul Thrasher for their assistance with the experimental program.
References
Barazzetti, L., and Scaioni, M. (2010). “Development and implementation of image-based algorithms for measurement of deformations in material testing.” Sensors, 10(8), 7469–7495.
Bentz, E. C. (2000). “Sectional analysis of reinforced concrete members.” Ph.D. dissertation, Univ. of Toronto, Toronto.
Chu, T. C., Ranson, W. F., Sutton, M. A., and Peters, W. H. (1985). “Applications of digital-image correlation techniques to experimental mechanics.” Exp. Mech., 25(3), 232–244.
Destrebecq, J. F., Toussaint, E., and Ferrier, E. (2010). “Analysis of cracks and deformations in a full scale reinforced concrete beam using a digital image correlation technique.” Exp. Mech., 51(6), 879–890.
Hoult, N. A., Take, W. A., Lee, C., and Dutton, M. (2013). “Experimental accuracy two dimensional strain measurements using digital image correlation.” Eng. Struct., 46, 718–726.
Hung, P. C., and Voloshin, A. S. (2003). “In-plane strain measurement by digital image correlation.” J. Braz. Soc. Mech. Sci. Eng., 25(3), 215–221.
Küntz, M., Jolin, M., Bastien, J., Perez, F., and Hild, F. (2006). “Digital image correlation analysis of crack behavior in a reinforced concrete beam during a load test.” Can. J. Civ. Eng., 33(11), 1418–1425.
Lecompte, D., Vantomme, J., and Sol, H. (2006). “Crack detection in a concrete beam using two different camera techniques.” Struct. Health Monit., 5(1), 59–68.
Lee, C., Take, W. A., and Hoult, N. A. (2012). “Optimum accuracy of two dimensional strain measurements using digital image correlation.” J. Comput. Civ. Eng., 795–803.
Luo, G., Chutatape, O., and Fang, H. (2001). “Experimental study on nonuniformity of line jitter in CCD images.” Appl. Opt., 40(26), 4716–4720.
MATLAB [Computer software]. Natick, MA, Mathworks.
Pan, B., Qian, K., Xie, H., and Asundi, A. (2009). “Two-dimensional digital image correlation for in-plane displacement and strain measurement: A review.” Meas. Sci. Technol., 20(6), 062001.
Pan, B., Yu, L., Wu, D., and Tang, L. (2013). “Systematic errors in two-dimensional digital image correlation due to lens distortion.” Opt. Lasers Eng., 51(2), 140–147.
Peters, W. H., Ranson, W. F., Sutton, M. A., Chu, T. C., and Anderson, J. (1983). “Application of digital correlation methods to rigid body mechanics.” Opt. Eng., 22(6), 226738–742.
Raffel, M., Willert, M., and Kompenhans, J. (2007). Particle image velocimetry: A practical guide, Springer, New York.
Smith, B. W., Li, X., and Tong, W. (1998). “Error assessment for strain mapping by digital image correlation.” Exp. Tech., 22(4), 19–21.
Sutton, M. A., Turner, J. L., Bruck, H. A., and Chae, T. A. (1991). “Full-field representation of discretely sampled surface deformation for displacement and strain analysis.” Exp. Mech., 31(2), 168–177.
Sutton, M. A., Wolters, W. J., Peters, W. H., Ranson, W. F., and McNeill, S. R. (1983). “Determination of displacements using an improved digital correlation method.” Image Vision Comput., 1(3), 133–139.
Thusyanthan, N. I., Take, W. A., Madabhushi, S. P. G., and Bolton, M. D. (2007). “Crack initiation in clay observed in beam bending.” Geotechnique, 57(7), 581–594.
Vecchio, F. J., and Collins, M. P. (1986). “The modified compression-field theory for reinforced concrete elements subjected to shear.” ACI J., 83(2), 219–231.
Wattrisse, B., Chrysochoos, A., Muracciole, J. M., and Némoz-Gaillard, M. (2001). “Analysis of strain localization during tensile tests by digital image correlation.” Exp. Mech., 41(1), 29–39.
White, D. J., and Take, W. A. (2002). “GeoPIV: Particle image velocimetry (PIV) software for use in geotechnical testing.” Technical Rep., Dept. of Engineering, Cambridge Univ., Cambridge, U.K.
White, D. J., Take, W. A., and Bolton, M. D. (2003). “Soil deformation measurement using particle image velocimetry (PIV) and photogrammetry.” Geotechnique, 50(7), 619–631.
Yoneyama, S., Kikuta, H., Kitagawa, A. and Kitamura, K. (2006). “Lens distortion correction for digital image correlation by measuring rigid body displacement.” Opt. Eng., 45(2), 023602.
Yoneyama, S., Kitagawa, A., Iwata, S., Tani, K., and Kituta, H. (2007). “Bridge deflection measurement using digital image correlation.” Exp. Tech., 31(1), 34–40.
Information & Authors
Information
Published In
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Dec 3, 2012
Accepted: Jul 22, 2013
Published online: Jul 24, 2013
Published in print: Mar 1, 2014
Discussion open until: May 3, 2014
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.