Conceptual Design of Superspan Partial Ground-Anchored Cable-Stayed Bridge with Crossing Stay Cables
Publication: Journal of Bridge Engineering
Volume 19, Issue 3
Abstract
As the span of conventional cable-stayed bridges reaches 1,200 m or longer, accumulated horizontal force components of the stay cables cause huge axial pressure in the girder, leading to sharp increases of girder dimension and weight, which makes it difficult to compete with suspension bridges in terms of economic consideration. In this paper, a new type of cable-stayed bridge is proposed, namely the partial ground-anchored cable-stayed bridge with crossing stay cables. In this new cable-stayed bridge system, long stay cables cross with each other in the midspan zone of the main span while the other ends of the long cables are anchored to the ground in the side spans. By this design, the long cables result in no additional horizontal pressure to the main girder, and the ratio of pylon height to span length can be reduced. A comparative analysis of this new bridge system with a conventional self-anchored cable-stayed bridge with a main span of 1,408 m is carried out. Results show that by using the new bridge system, the horizontal pressure in the main girder can be reduced by 29.6%, and the total cost can be reduced by 11.8%. Furthermore, the size of ground anchors for this new bridge system is only about 30% of that of a suspension bridge with the same span length. Finally, a cantilever construction method for the new bridge system is introduced as well.
Get full access to this article
View all available purchase options and get full access to this article.
References
Cui, B., et al. (2010). “The summary design of the 4th Changjiang River Bridge in Nanjing City.” 2010 National Academic Symp. on Bridges, China Communications Press, Beijing.
Gimsing, N. J. (1988). Cable-stayed bridges with ultra long spans, Dept. of Structural Engineering, Technical Univ. of Denmark, Lyngby, Denmark.
Ministry of Communications of P.R. China. (2004). “General code for design of highway bridges and culverts.” JTG D60-2004, China Communications Press, Beijing.
Muller, J. (1992). “The bi-stayed bridge concept: Overview of wind engineering problems.” Proc., 1st Int. Symp. on Aerodynamics of Large Bridges, Transportation Research Board, Washington, DC.
Otsuka, H. (1991). “Fundamental study for design and erection of partially anchored composite cable-stayed bridge with 900 m center span length.” Innovation in cable-stayed bridge, Proc., Int. Symp. for Innovation in Cable-Stayed Bridges, Fukuoka, Japan.
Sun, B., Cheng, J., and Xiao, R. C. (2010). “Preliminary design and parametric study of 1400 m partially earth-anchored cable-stayed bridge.” Sci. China Technol. Sci., 53(2), 502–511.
Xiao, Y. (1994). “Tensioning of cable-stayed bridge girder for increased span length and improved stability.” Proc., Int. Symp. & Exhibition on Cable-Stayed Bridges, Tongji Univ., Shanghai, China.
Xu, Z. Y. (2005). “The cost determination and control of Runyang Yangtze River Highway Bridge.” Master’s thesis, Tongji Univ., Shanghai, China.
Information & Authors
Information
Published In
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Oct 12, 2012
Accepted: Jul 8, 2013
Published online: Jul 10, 2013
Published in print: Mar 1, 2014
Discussion open until: Apr 25, 2014
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.