Live Load Distribution Factors in Two-Girder Bridge Systems Using Precast Trapezoidal U-Girders
Publication: Journal of Bridge Engineering
Volume 19, Issue 2
Abstract
The lever rule method is often used to determine live load distribution factors (LDFs) in two-girder bridge systems because of the ranges of applicability implicit in the simplified equations of the AASHTO LRFD bridge design specifications. This method is typically more conservative than the simplified equations, which take into account key parameters such as beam spacing, span length, longitudinal beam stiffness, and slab thickness. The lever rule method for yielding LDFs does not take into account these key parameters and only considers simple span distribution; therefore, a certain degree of conservatism is implied. This study demonstrates that the lever rule method in determining LDFs in two-girder bridge systems using precast trapezoidal U-girders is not overly conservative, as comparisons between LDFs from finite-element analysis (FEA) and the lever rule method of the AASHTO LRFD show that the lever rule method produces values for LDFs that are closely reflective of the actual response for shear and to a lesser degree for flexure. The effects of live load on parameters that include flexural response, slenderness, and span length are also considered.
Get full access to this article
View all available purchase options and get full access to this article.
References
AASHTO. (2007). LRFD bridge design specifications for highway bridges, 4th Ed., Washington, DC.
Barr, P. J., Eberhard, M. O., and Stanton, J. F. (2001). “Live-load distribution factors in prestressed concrete girder bridges.” J. Bridge Eng., 298–306.
Chan, T. H. T., and Chan, J. H. F. (1999). “The use of eccentric beam elements in the analysis of slab-on-girder bridges.” Struct. Eng. Mech., 8(1), 85–102.
Chen, Y. (1999). “Distribution of vehicular loads on bridge girders by the FEA using ADINA: Modeling, simulation, and comparison.” Comp. Struct., 72(1-3), 127–139.
Chen, Y., and Aswad, A. (1996). “Stretching span capability of prestressed concrete bridges under AASHTO LRFD.” J. Bridge Eng., 112–120.
Chung, W., Phuvoravan, K., Liu, J., and Sotelino, E. (2005). “Applicability of the simplified load distribution factor equation to PSC girder bridges.” KSCE J. Civ. Eng., 9(4), 313–319.
Eom, J., and Nowak, A. S. (2001). “Live load distribution for steel girder bridges.” J. Bridge Eng., 489–497.
Hughs, E. A. (2004). “Live-load distribution factors for a prestressed concrete spread box-girder bridge.” M.S. thesis, New Mexico State Univ., Las Cruces, NM.
LARSA 4D 7.01.69 [Computer software]. Melville, NY, LARSA.
Mabsout, M. E., Tarhini, K. M., Frederick, G. R., and Tayar, C. (1997). “Finite element analysis of steel girder highway bridges.” J. Bridge Eng., 83–87.
Mensah, S. A. (2010). “Live load distribution factors in two-girder bridge systems using precast trapezoidal U-girders.” M.S. thesis, Univ. of Colorado, Denver.
PGSuper 2.1.0 [Computer software]. South Lake Tahoe, CA, BridgeSight.
SAP2000 14.2.4 [Computer software]. Walnut Creek, CA, Computers and Structures.
Zokaie, T. (2000). “AASHTO-LRFD live load distribution specifications.” J. Bridge Eng., 131–138.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Feb 13, 2012
Accepted: May 31, 2013
Published online: Jun 3, 2013
Published in print: Feb 1, 2014
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.