Repair of Prestressed-Concrete Girders Combining Internal Strand Splicing and Externally Bonded CFRP Techniques
Publication: Journal of Bridge Engineering
Volume 19, Issue 2
Abstract
Collisions between overheight vehicles and bridges are becoming more commonplace. Collision damage, however, is generally far from catastrophic, although sound repair techniques are critical if additional damage (typically related to corrosion) is to be mitigated. Steel posttensioning, fiber-reinforced polymers (FRPs), strand splicing, and other repair techniques have been used throughout the United States to repair damaged prestressed girders. Whereas these techniques individually are quite effective, the combination of repair techniques has far greater impact. Physical and mechanical limitations associated with individual repair techniques clearly led to the adoption of hybrid or mixed repair approaches in which techniques are used in combination, leveraging the strengths of each repair technique and maximizing the degree of damage that may be repaired. This paper addresses the practical case of augmenting an internal strand-splice repair with externally bonded carbon fiber–reinforced polymer (CFRP) materials, thereby overcoming the limitations of each method. This paper describes design considerations for strand-splice and externally bonded CFRP repair techniques both individually and in combination. A prototype example is presented. The hybrid repair approach is shown to maximize the degree of damage that may be repaired.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The work reported in this paper was conducted for AASHTO, with funding provided through the National Cooperative Highway Research Program (NCHRP) Project 20-07, Task 307, Updated Research for Collision Damage and Repair of Prestressed Concrete Beams. The work was guided by a technical working group. The project was managed by Dr. Waseem Dekelbab, NCHRP Senior Program Officer, whose support is greatly appreciated. The authors thank Mr. Tim Bradberry of the Texas DOT for providing them with some additional details of the prototype structure beyond those reported by Yang et al. (2011). The opinions expressed are those of the authors.
References
AASHTO. (2010). LRFD bridge design specifications, 4th Ed. and Interims, Washington, DC.
AASHTO. (2011). Manual for bridge evaluation, 2nd Ed., Washington, DC.
American Concrete Institute (ACI) Committee 440 (2002). “Guide for the design and construction of externally bonded FRP systems for strengthening concrete structures.” ACI 440.2R-02, Detroit.
American Concrete Institute (ACI) Committee 440. (2008). “Guide for the design and construction of externally bonded FRP systems for strengthening concrete structures.” ACI 440.2R-08, Detroit.
Green, P. S., Boyd, A. J., Lammert, K., and Ansley, M. (2004). CFRP repair of impact-damaged bridge girders, Vol. 1: Structural evaluation of impact damaged prestressed concrete I-girders repaired with FRP materials, University of Florida Press, Gainesville, FL.
Harries, K. A. (2006). “Full-scale testing program on de-commissioned girders from the Lake View Drive Bridge.” Rep. FHWA-PA-2006-008-EMG001, Pennsylvania DOT, Harrisburg, PA.
Harries, K. A. (2009). “Structural testing of prestressed concrete girders from the Lake View Drive Bridge.” J. Bridge Eng., 78–92.
Harries, K. A., Kasan, J. L., and Aktas, C. (2009). “Repair methods for prestressed concrete bridges.” Rep. FHWA-PA-2009-008-PIT 006, Pennsylvania DOT, Harrisburg, PA.
Harries, K. A., Kasan, J. L., Miller, R., and Brinkman, R. (2012). “Updated research for collision damage and repair of prestressed concrete beams.” NCHRP Project 20-07, Task 307, Final Rep., National Cooperative Highway Research Program, Transportation Research Board, Washington, DC.
Kasan, J., and Harries, K. A. (2011). “Redevelopment of prestressing force in severed prestressed strands.” J. Bridge Eng., 431–437.
Kasan, J. L., and Harries, K. A. (2012). “Assessment of damaged prestressed adjacent box girder bridges: A case study.” Proc., 14th Int. Conf. on Structural Faults and Repair, Edinburgh Technics Press, Edinburgh, U.K.
Kasan, J., and Harries, K. A. (2013). “Analysis of eccentrically loaded adjacent box girders.” J. Bridge Eng., 15–25.
Kasan, J. L., Harries, K. A., Miller, R. A., and Brinkman, R. (2013). “Limits of application of externally bonded CFRP repairs for impact-damaged prestressed concrete girders.” J. Compos. Constr., in press.
Klaiber, F. W., Wipf, T. J., and Kempers, B. J. (2003). “Repair of damaged prestressed concrete bridges using CFRP.” Proc., Mid-Continent Transportation Symp., Center for Transportation Research and Education, Ames, IA.
Labia, Y., Saiidi, M., and Douglas, B. (1996). “Evaluation and repair of full-scale prestressed concrete box girders.” Rep. CCEER-96-2, Center for Civil Engineering Earthquake Research, Univ. of Nevada, Reno, NV.
Law Engineering. (1990). “Load testing of anchoring assemblies (grabb-it cable splice), job number 1460014400, lab number E0429: Testing report.” Atlanta.
National Cooperative Highway Research Program (NCHRP). (2008). “Recommended construction specifications and process control manual for repair and retrofit of concrete using bonded FRP composites.” NCHRP Rep. 609, Transportation Research Board, Washington, DC.
Olson, S. A., French, C. W., and Leon, R. T. 1992. “Reusability and impact damage repair of twenty-year-old AASHTO type III girders.” Minnesota Dept. of Transportation Research Rep. 93–04, Univ. of Minnesota, Minneapolis.
Prestress Supply. (2008). “Grabb-it cable splice product information sheet.” Lakeland, FL.
Prestress Supply. (2011). “Grabb-it cable splice installation instructions.” Lakeland, FL 〈http://www.prestresssupply.com/LinkClick.aspx?fileticket=Sx6pxCOxgAc%3d&tabid=147〉 (Feb. 9, 2012).
Reed, C. E., and Peterman, R. J. (2005). “Evaluating FRP repair method for cracked prestressed concrete bridge members subjected to repeated loadings phase 1.” Rep. KTRAN: KSU-01-2, Kansas DOT, Topeka, KS.
Reed, C. E., and Peterman, R. J. (2004). “Evaluation of prestressed concrete girders strengthened with carbon fiber reinforced polymer sheets.” J. Bridge Eng., 185–192.
Reed, C. E., Peterman, R. J., Rasheed, H., and Meggers, D. (2007). “Adhesive applications used during repair and strengthening of 30-year-old prestressed concrete girders.” Transportation Research Record 1827, Transportation Research Board, Washington, DC, 36–43.
Schiebel, S., Parretti, R., and Nanni, A. (2001). “Repair and strengthening of impacted PC girders on Bridge A4845, Jackson County, Missouri.” Rep. RDT01-017, Missouri DOT, Jackson City, MO.
Shanafelt, G. O., and Horn, W. B. 1985. “Guidelines for evaluation and repair of prestressed concrete bridge members.” NCHRP Rep. 280, Project No. 12-21(1), National Cooperative Highway Research Program, Transportation Research Board, Washington, DC.
Shanafelt, G. O., and Horn, W. B. (1980). “Damage evaluation and repair methods for prestressed concrete bridge members.” NCHRP Rep. 226, Project No. 12-21, National Cooperative Highway Research Program, Transportation Research Board, Washington, DC.
Tumialan, J. G., Huang, P., Nanni, A., and Jones, M. (2001). “Strengthening of an impacted PC girder on Bridge A10062, St Louis County, Missouri.” Rep. RDT01-013, Univ. of Missouri, Rolla, MO.
TRC. (2002). XTRACT: A tool for axial force–ultimate curvature interactions, Rancho Cordova, CA.
Wipf, T. J., Klaiber, F. W., Rhodes, J. D., and Kempers, B. J. (2004). Effective structural concrete repair, Vol. 1: Repair of impact damaged prestressed concrete beams with CFRP, Iowa DOT Project TR-428, Iowa DOT, Ames, IA.
Yang, D., Merrill, B. D., and Bradberry, T. E. (2011). “Texas’ use of CFRP repair to concrete bridges.” ACI SP 277: Recent advances in maintenance and repair of concrete bridges, Y. J. Kim, ed., American Concrete Institute, Farmington Hills, MI, 39–48.
Zobel, R. S., and Jirsa, J. O. (1998). “Performance of strand splice repairs in prestressed concrete bridges.” PCI J., 43(6), 72–84.
Zobel, R. S., Jirsa, J. O., Fowler, D. W., and Carrasquillo, R. L. (1996). “Evaluation and repair of impact-damaged prestressed concrete bridge girders.” Rep. FHWA/TX-96/1370-3F, Univ. of Texas, Austin, TX.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Sep 12, 2012
Published online: Feb 1, 2013
Accepted: Aug 9, 2013
Published in print: Feb 1, 2014
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.