Efficient Prestressed Concrete-Steel Composite Girder for Medium-Span Bridges. I: System Description and Design
This article has a reply.
VIEW THE REPLYThis article has a reply.
VIEW THE REPLYPublication: Journal of Bridge Engineering
Volume 18, Issue 12
Abstract
A new prestressed concrete-steel composite (PCSC) girder system is developed to provide a viable alternative for steel and prestressed concrete I-girders in bridges. The PCSC girder is composed of a lightweight W-shaped steel section with shear studs on its top and bottom flanges to achieve composite action with the pretensioned concrete bottom flange and the cast-in-place concrete deck. The PCSC girder is lightweight, economical, durable, and easy to fabricate. The proposed fabrication procedure is similar to those of prestressed concrete girders and does not need specialized equipment, materials, and forms. A service design procedure is proposed using the age-adjusted elasticity modulus method to evaluate the time-dependent stresses and strains in the PCSC girder caused by creep and shrinkage effects of concrete and relaxation of strands. The strength design method is proposed for the design of PCSC girders at prestress release. A design procedure is proposed to assist engineers to accomplish economic design and production of PCSC girders, and design examples are presented to illustrate the design procedure.
Get full access to this article
View all available purchase options and get full access to this article.
References
AASHTO. (2007). AASHTO LRFD bridge design specifications, 4th Ed. with 2008 interim revisions, Washington, DC.
American Concrete Institute (ACI) Committee 318. (2011). “Building code requirements for structural concrete” and “Commentary,” ACI 318-11 and ACI 318R-11, Farmington Hills, MI.
Basu, P. K., Sharif, A. M., and Ahmed, N. U. (1987). “Partially prestressed composite beams. I.” J. Struct. Eng., 113(9), 1909–1925.
Bonenfant, R. R., Jr. (2009). “How to estimate the cost of structural steel.” Estimating Today, 15–23, 〈http://www.aspenational.org/userfiles/file/Technical%20Papers/2009/TechPaper_January2009.pdf〉.
Bozzo, L. M., and Torres, L. (2004). “A proposed semi-prefabricated prestressed composite steel–concrete slab.” Struct. Build., 157(5), 309–318.
Deng, Y. (2012). “Efficient prestressed concrete-steel composite girder for medium-span bridges.” Ph.D. dissertation, Univ. of Nebraska–Lincoln, Lincoln, NE.
Deng, Y., and Morcous, G. (2013a). “Efficient prestressed concrete-steel composite girder for medium-span bridges. II: Finite-element analysis and experimental investigation.” J. Bridge Eng., 18(12), 1358–1372.
Deng, Y., and Morcous, G. (2013b). “Reliability calibration of strength design for prestressed concrete members at transfer.” Reliability Eng. Syst. Safety, in press.
DOT-Federal Highway Administration (DOT-FHWA). (2011). “National bridge inventory (NBI)—Count of bridges by structure type.” 〈http://www.fhwa.dot.gov/bridge/struct.cfm〉 (Jan. 22, 2012).
Florida DOT (FDOT). (2012). “FDOT structures manual, Vol. 2, structures design guidelines.” Topic No. 625-020-018, Tallahassee, FL.
Ghali, A., Favre, R., and Elbadry, M. (2012). Concrete structures: Stresses and deformations, 4th Ed., Spon Press, London.
Hanswille, I. G. (2011). “Composite bridges in Germany—State of the art.” Proc., Workshop on Eurocode 4-2, composite bridges.
Lorenc, W., and Kubica, E. (2006). “Behavior of composite beams prestressed with external tendons: Experimental study.” J. Constr. Steel Res., 62(12), 1353–1366.
Morcous, G., Hanna, K., and Tadros, M. K. (2011). “Impact of 0.7 inch diameter strands on NU I-girders.” Final Rep. to Nebraska Dept. of Roads (NDOR), No. SPR-1(08) P311, Univ. of Nebraska–Lincoln, Omaha, NE.
Noppakunwijai, P., Al-Omaishi, N., Tadros, M. K., and Krause, G. L. (2002). “Elimination of prestressed concrete compression limits at service load.” PCI J., 47(6), 2–19.
Noppakunwijai, P., Tadros, M. K., Ma, Z., and Mast, R. F. (2001). “Strength design of pretensioned flexural concrete members at prestress transfer.” PCI J., 46(1), 34–52.
Noppakunwijai, P., Tadros, M. K., and Sun, C. (2003). “Application of the strength design method for flexural members at prestress transfer.” PCI J., 48(5), 62–75.
Precast/Prestressed Concrete Institute (PCI). (2011). Precast prestressed concrete bridge design manual, 3rd Ed., Chicago.
Precast/Prestressed Concrete Institute (PCI) Industry Handbook Committee. (2010). PCI design handbook−Precast/prestressed concrete, 7th Ed., Chicago.
Sayed-Ahmed, E. Y. (2001). “Behaviour of steel and (or) composite girders with corrugated steel webs.” Can. J. Civ. Eng., 28(4), 656–672.
Wee, T. H., Chin, M. S., and Mansur, M. A. (1996). “Stress-strain relationship of high-strength concrete in compression.” J. Mater. Civ. Eng., 8(2), 70–76.
Information & Authors
Information
Published In
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Aug 22, 2012
Accepted: Jan 30, 2013
Published online: Feb 1, 2013
Published in print: Dec 1, 2013
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.