Steel Post-and-Beam Barrier with GFRP-Reinforced Concrete Curb and Bridge Deck Connection
Publication: Journal of Bridge Engineering
Volume 18, Issue 11
Abstract
This paper discusses the crashworthiness of prototype steel post-and-beam barriers [Ministry of Transportation of Québec (MTQ) Type 210] whose concrete curb-to-bridge deck connection is reinforced with corrosion-resistant glass fiber-reinforced polymer (GFRP). Experimental evidence is obtained from proof tests on five full-scale barrier and overhang subassemblies. The text matrix includes three GFRP RC and two steel RC specimens. The steel RC benchmark system is currently used as specified in the Canadian Highway Bridge Design Code (CHBDC). The objective is to verify whether (1) the resistance to out-of-plane quasi-static loads and the associated transverse deflection of the GFRP RC curb and steel barrier system are comparable to those of the steel RC counterparts; (2) the transverse strength exceeds the CHBDC equivalent static load demand; and (3) failure at the curb-deck connection is attained at safe transverse loads, and premature failure at the curb-deck connection is prevented. The GFRP and steel RC systems exhibit comparable strength, with the former undergoing greater deformations. For both systems, premature brittle failure of the curb-deck connection is prevented, and the equivalent static load requirements are satisfied. A larger capacity is attained when closed GFRP stirrup connectors are used at the curb-deck connection in lieu of C-shaped stirrups. An analytical model is used to predict the lower-bound strength of the GFRP RC curb-deck connection, and relevant design implications are discussed. It is recommended that the adoption of the proposed GFRP RC design relies on conclusive evidence from crash testing to verify safety against vehicle rollover because of the greater deformations compared with steel RC systems having the same amount of reinforcement.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors acknowledge the financial and technical support of the Ministry of Transportation of Québec. Special thanks are extended to Pultrall, GFRP bar supplier; Beton Demix, concrete supplier; Aciers Orford, steel bar supplier; Les Coffrages Carmel, for assistance in the fabrication of the formwork, concrete casting, and curing; the technical staff of the structural laboratory at the University of Sherbrooke, especially Mr. Francois Ntacorigira and Mr. Simon Kelly, for assistance in instrumenting and testing the barrier specimens; and the University of South Carolina for support through the second author’s research incentive funds.
References
AASHTO. (2009). AASHTO LRFD bridge design guide specifications for GFRP-reinforced concrete bridge decks and traffic railings, 1st Ed., Washington, DC.
Ahmed, E. A., and Benmokrane, B. (2011). “Performance of concrete bridge barriers reinforced with conditioned GFRP bars in alkaline solution.” Proc., 4th Int. Conf. on Durability and Sustainability of Fibre Reinforced Polymer (FRP) Composites for Construction and Rehabilitation of Structures (CDCC2011), B. Benmokrane, E. El-Salakaway, and E. Ahmed, eds., Univ. of Sherbrooke, Sherbrooke, QC, Canada, 309–318.
Benmokrane, B., El-Salakawy, E., Desgagné, G., and Lackey, T. (2004). “FRP bars for bridges.” Concr. Int., 26(8), 84–90.
Benmokrane, B., El-Salakawy, E., El-Gamal, S., and Goulet, S. (2007a). “Construction and testing of Canada’s first concrete bridge deck totally reinforced with glass FRP bars: Val-Alain Bridge on Highway 20 East.” J. Bridge Eng., 12(5), 632–645.
Benmokrane, B., El-Salakawy, E., El-Ragaby, A., and El-Gamal, S. (2007b). “Performance evaluation of innovative concrete bridge deck slabs reinforced with fibre-reinforced polymer bars.” Can. J. Civ. Eng., 34(3), 298–310.
Benmokrane, B., El-Salakawy, E., El-Ragaby, A., and Lackey, T. (2006). “Designing and testing of concrete bridge decks reinforced with glass FRP bars.” J. Bridge Eng., 11(2), 217–229.
Bischoff, P., and Gross, S. (2011). “Design approach for calculating deflection of FRP-reinforced concrete.” J. Compos. Constr., 15(4), 490–499.
Buth, C. E., Williams, W. F., Bligh, R. P., Menges, W. L., and Haug, R. R. (2003). “Performance of the TxDOT T202 (MOD) bridge rail reinforced with fiber reinforced polymer bars.” Rep. No. FHWA/TX-03/0-4138-3, Texas Transportation Institute, College Station, TX.
Canadian Standard Association (CSA). (2006). Canadian highway bridge design code, CAN/CSA S6-06, Rexdale, ON, Canada, 788.
De Luca, A., Matta, F., and Nanni, A. (2010). “Behavior of full-scale GFRP reinforced concrete columns under axial load.” ACI Struct. J., 107(5), 589–596.
El-Salakawy, E., Benmokrane, B., Masmoudi, R., Brière, F., and Breaumier, E. (2003). “Concrete bridge barriers reinforced with glass fiber-reinforced polymer composite bars.” ACI Struct. J., 100(6), 815–824.
Matta, F., and Nanni, A. (2009). “Connection of concrete railing post and bridge deck with internal FRP reinforcement.” J. Bridge Eng., 14(1), 66–76.
Mufti, A., Banthia, N., Benmokrane, B., Boulfiza, M., and Newhook, J. (2007). “Durability of GFRP composite rods.” Concr. Int., 29(2), 37–42.
Nanni, A., and Faza, S. (2002). “Designing and constructing with FRP bars: An emerging technology.” Concr. Int., 24(11), 53–58.
Nilsson, I. H. E., and Losberg, A. (1976). “Reinforced concrete corners and joints subjected to bending moment.” J. Struct. Div., 102(6), 1229–1254.
Pultrall. (2007). Product technical specifications, ADS Composites Group, Thetford Mines, QC, Canada.
Ross, H. E., Sicking, D. L., Zimmer, R. A., and Michie, J. D. (1993). “Recommended procedures for the safety performance evaluation of highway features.” NCHRP Rep. 350, National Academy Press, Washington, DC.
Information & Authors
Information
Published In
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Nov 22, 2012
Accepted: Jan 16, 2013
Published online: Jan 18, 2013
Published in print: Nov 1, 2013
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.