Shear Design of RC Bridge Deck Slabs according to Eurocode 2
This article has a reply.
VIEW THE REPLYPublication: Journal of Bridge Engineering
Volume 18, Issue 12
Abstract
In order to coordinate the design of RC structures all over Europe, the new Eurocode has been implemented in all member states. In Germany, for example, the unified codes with their national annexes are exclusively valid as of July 1, 2012. Some changes to Eurocode No. 2 have large effects on the design of new buildings and the safety verification of old ones. This applies particularly for the shear design of RC members without stirrups. The structural safety of RC bridge decks, which are mostly built without shear reinforcement, under static and cyclic loads, is the focus of this paper. The shear capacity of the new design regulations will be compared with test results to demonstrate the inaccuracy of the Eurocode No. 2 approach and the need for further investigations. Then results of a big test series with slabs under wheel loads, straight and haunched beams under monotonic loading, and RC beams under cyclic loads will be discussed. The main purpose of the presented research is to improve the shear design of RC bridge deck slabs, which are mostly built without stirrups. This paper does not deal with prestressed slabs, and further standards and design approaches are not part of the paper.
Get full access to this article
View all available purchase options and get full access to this article.
References
Chang, T. S., and Kesler, C. E. (1958). “Static and fatigue strength in shear of beams with tensile reinforcement.” J. Am. Concr. Inst., 54(6), 1033–1057.
European Commitee for Standardization (CEN). (2004). “Design of concrete structures—Part 1-1: General rules and rules for buildings.” Eurocode 2, Brussels, Belgium.
European Commitee for Standardization (CEN). (2005). “Design of concrete structures—Part 2: Concrete bridges—Design and detailing rules.” Eurocode 2, Brussels, Belgium.
Frey, R., and Thuerlimann, B. (1983). “Ermüdungsversuche an Stahlbetonbalken mit und ohne Schubbewehrung [Fatigue tests of RC beams with and without web reinforcement].” Report No. 7801-01, Institut für Baustatik und Konstruktion ETH, Zurich, Switzerland (in German).
Latte, S. (2010). “Zur Tragfähigkeit von Stahlbeton-Fahrbahnplatten ohne Querkraftbewehrung [Load bearing capacity of RC bridge decks without shear reinforcement].” Ph.D. thesis, Hamburg Univ. of Technology, Hamburg, Germany (in German).
Markworth, E., Mildner, K., and Streiber, A. (1984). “Versuche zur Querkrafttragfähigkeit von Stahlbetonbalken unter dynamischer Belastung [Shear bearing capacity of RC beams under cyclic loads].” Die Strasse, Vol. 6, 175–180 (in German).
Muttoni, A., and Fernandez Ruiz, M. (2008). “Shear strength of members without transverse reinforcement as a function of critical shear crack width.” ACI Struct. J., 105(2), 163–172.
Muttoni, A., and Schwartz, J. (1991). “Behaviour of beams and punching in slabs without shear reinforcement.” Proc., IABSE Colloquium, Vol. 62, International Association for Bridge and Structural Engineering (IABSE), ETH Zurich, Switzerland, 703–708.
Nghiep, V. H. (2011). “Shear design of straight and haunched concrete beams without stirrups.” Ph.D. thesis, Hamburg Univ. of Technology, Hamburg, Germany.
Reineck, K.-H., Kuchma, D., Kim, K. S., and Marx, S. (2003). “Shear database for reinforced concrete members without shear reinforcement.” ACI Struct. J., 100(2), 240–249.
Reissen, K., and Hegger, J. (2011). “Experimental study on the shear capacity of concrete slabs.” IABSE-IASS Symp. 2011: Taller, Longer, Lighter—Meeting Growing Demand with Limited Resources, International Association for Bridge and Structural Engineering (IABSE), Zurich, Switzerland.
Rombach, G., and Kohl, M. (2012a). “Fatigue strength of concrete members without web reinforcement.” Proc., fib Symp. Stockholm 2012: Concrete Struct. for Sustainable Community, D. H. Bager and J. Silfwerbrand, eds., Royal Institute of Technology, 147–151.
Rombach, G., and Kohl, M. (2012b). “Resistance of concrete members without stirrups to fatigue loads.” Proc., 18th IABSE Congress: Innovative Infrastructures—Toward Human Urbanism, International Association for Bridge and Structural Engineering (IABSE), ETH Zurich, Switzerland.
Rombach, G., Kohl, M., and Nghiep, V. H. (2011). “Shear design of concrete members without shear reinforcement—A solved problem?” Proc., 12th East Asia-Pacific Conf. on Structural Engineering and Construction, Vol. 14, Elsevier, 134–140.
Rombach, G., and Latte, S. (2008). “Shear resistance of bridge decks without shear reinforcement.” Proc., fib Symp.: Tailor Made Concrete Structures, J. Walraven and D. Stoelhorst, eds., Taylor & Francis, London, 519–525.
Rombach, G., and Latte, S. (2009). “Querkrafttragfähigkeit von Fahrbahnplatten ohne Querkraftbewehrung [Shear resistance of deck slabs without shear reinforcement].” Beton- und Stahlbetonbau, Vol. 10, 1–15 (in German).
Rombach, G., and Nghiep, H. N. (2011). “Versuche zur Querkrafttragfähigkeit von gevouteten Stahlbetonbalken ohne Querkraftbewehrung [Tests on the shear bearing capacity of haunched RC beams without shear reinforcement].” Beton- und Stahlbetonbau, Vol. 1, 11–20 (in German).
Schlaefli, M., and Bruehwiler, E. (1998). “Fatigue of reinforced concrete elements without shear reinforcement.” Draft Test Rep., École Polytechnique Fédérale de Lausanne, Lausanne, Switzerland.
Ueda, T., and Okamura, H. (1983). “Behaviour in shear of reinforced concrete beams under fatigue loading.” J. Faculty Eng., 37(1), 17–48.
Vaz Rodrigues, R., Muttoni, A., and Burdet, O. (2006). “Large scale tests on bridge slabs cantilevers subjected to traffic loads.” Proc., 2nd Int. Congress, Fédération Internationale du Béton, Lausanne, Switzerland, 1–10.
Zanuy, C., Albajar, L., and De La Fuente, P. (2009). “Sectional analysis of concrete structures under fatigue loading.” ACI Struct. J., 106(5), 667–677.
Information & Authors
Information
Published In
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Sep 18, 2012
Accepted: Dec 13, 2012
Published online: Nov 15, 2013
Published in print: Dec 1, 2013
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.