Laboratory Testing, Field Installation, and Monitoring of a Silicone Foam Sealant for Bridge Expansion Joints
Publication: Journal of Bridge Engineering
Volume 18, Issue 8
Abstract
Bridge expansion joint sealants are used to deter water and corrosive materials from leaking through the joint and damaging the bridge structure. However, problems with leakage from failing joint sealants have been observed. In response to this situation, a silicone foam sealant designed for small-movement bridge expansion joints was developed. The foam sealant proved to be easy to use and economical. In previously reported studies, various laboratory tests were conducted to evaluate the foam sealant’s tensile strength, compressive strength, reaction to various temperatures, stress relaxation, creep behavior, and bonding capabilities to various substrate materials, such as steel, asphalt, concrete, and polymer concrete. In the current study, further laboratory tests were conducted on the sealant. These tests included ponding and freeze-thaw resistance. The subject study included the development and use of an application procedure to install the silicone foam sealant into bridge expansion joints. After being applied to expansion joints on four bridges in the Northeast (Connecticut, New Hampshire, Rhode Island, and New York), continuous monitoring of the temperature, precipitation, and physical condition of the sealant was conducted for over 1 year. Based on these tests, it can be concluded that the silicone foam sealant is as easy to install and as durable as conventional solid sealants.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The research reported was conducted under the “NETC 02-6 Phase 2—Sealing of Small Movement Expansion Joints: Field Demonstration and Monitoring” project sponsored by the New England Transportation Consortium from funding received from the Federal Highway Administration, U.S. Department of Transportation. The support is gratefully acknowledged. The authors extend sincere thanks to the NETC Project Technical Committee members from the New England states, and the state Departments of Transportation in Connecticut, New Hampshire, Rhode Island, and New York for providing the bridges in their states and the logistical help and facilities making it possible to install the sealants into the bridge expansion joints. The authors also acknowledge the Watson Bowman Acme Corporation in Amherst, New York, for their donating the WABO two-part silicone sealant material (Watson Bowman Acme 2008a). The contents of this paper reflect the views of the writers, who are responsible for the facts and accuracy of the data presented herein. The contents do not necessarily reflect the views of the NETC or the Federal Highway Administration.
References
ASTM. (2011). “Standard practice for non-destructive evaluation of adhesion of installed weatherproofing sealant joints using a rolling device.” ASTM C1736-11, West Conshohocken, PA.
CAMMDA. (2009a). “Dispensing guns—dual component—pneumatic.” CAMMDA Corp., 〈http://www.cammda.com/node/26〉 (Mar. 5, 2009).
CAMMDA. (2009b). “Static mixers—helical.” CAMMDA Corp., 〈http://www.cammda.com/content/static-mixers〉 (Mar. 5, 2009).
Chang, L. M., and Lee, Y. J. (2002). “Evaluation of performance of bridge deck expansion joints.” Perform. Constr. Fac., 16(1), 3–9.
Cox North America. (2009). “Model CBA-600S—dual component/two part sausage—air pneumatic sealant applicator.” Cox North America, 〈http://cox-applicators.com/index.php/our-products/?product_id=48〉 (Mar. 5, 2009).
Dornsife, R. J. (1999). “Expansion joints.” Chapter 25, Bridge engineering handbook, CRC Press, Boca Raton, FL. 25.1–25.14.
Dow Corning Silicones. (2009). “Using the Dow Corning joint movement indicator.” Form No. 61-637B-01, Dow Corning, 〈http://www.dowcorning.com/content/publishedlit/61-637b-01.pdf〉 (Aug. 2, 2009).
Exova. (2010). “Ultrasonic N.D.T.” Exova, 〈http://www.exova.com/industry-sectors/metallurgy-a-general-engineering/services/ultrasonic-ndt〉 (Oct. 3, 2010).
Gelest. (2008). “Adhesives and sealants.” Gelest Inc., 〈http://www.gelest.com〉 (Oct. 17, 2008).
Malla, R. B., Shaw, M. T., Shrestha, M. R., and Boob, S. (2006). “Sealing small movement bridge expansion joints.” NETCR-58, Final NETC 02-6 Project Rep., New England Transportation Consortium (NETC), Fall River, MA.
Malla, R. B., Shaw, M. T., Shrestha, M. R., and Brijmohan, S. B. (2007). “Development and laboratory analysis of silicone foam sealant for bridge expansion joints.” J. Bridge Eng., 12(4), 438–448.
Malla, R. B., Shrestha, M. R., Shaw, M. T., and Brijmohan, S. B. (2011a). “Temperature aging, compression recovery, creep, and weathering of a foam silicone sealant for bridge expansion joints.” J. Mater. Civ. Eng., 23(3), 287–298.
Malla, R. B., Swanson, B., and Shaw, M. T. (2010). “Laboratory evaluation of a silicone foam sealant for field application of bridge expansion joints.” Proc., 2010 Society for Experimental Mechanics (SEM) Annual Conf. and Exposition, SEM, Bethel, CT.
Malla, R. B., Swanson, B., and Shaw, M. T. (2011b). “Laboratory evaluation of a silicone foam sealant bonded to various expansion joint header materials.” Constr. Building Mat., 25(11), 4132–4143.
Momentive Performance Materials. (2008). “U crosslinking agent 430.” Momentive Performance Materials, 〈http://www.momentive.com/Products/ShowTechnicalDataSheet.aspx?id=25556〉 (Oct. 4, 2008).
NH DOT. (2010). “Lyme traffic detail sheets—traffic volume report.” New Hampshire Dept. of Transportation, 〈http://www.nh.gov/dot/org/operations/traffic/tvr/detailsheets/lyme〉 (Sep. 23, 2010).
Watson Bowman Acme. (2001). “WABO®SiliconeSeal installation procedure.” Watson Bowman Acme Corp., 〈http://www.wbacorp.com/Products/ProductInstallationProcedures.aspx?ProductlineID=48〉 (Sep. 5, 2008).
Watson Bowman Acme. (2008a). “WABO®SiliconeSeal.” Watson Bowman Acme Corp., 〈https://wbacorp.com/products/bridge-highway/highways-roads/wabo-siliconeseal-bridge/〉 (Sep. 5, 2008).
Watson Bowman Acme. (2008b). “WABO_SiliconeSeal installation procedure.” Watson Bowman Acme Corp., 〈https://wbacorp.com/public/userfiles/WaboSiliconeSeal_Install.pdf〉 (Sep. 5, 2008).
Weather Underground. (2009). “Weather history.” Weather Underground, 〈http://www.wunderground.com/history〉 (Aug. 15, 2009).
Information & Authors
Information
Published In
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Jul 5, 2011
Accepted: Jul 6, 2012
Published online: Jul 21, 2012
Published in print: Aug 1, 2013
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.