Improved Serviceability Criteria for Steel Girder Bridges
Publication: Journal of Bridge Engineering
Volume 18, Issue 7
Abstract
Current AASHTO LRFD Bridge Design Specifications Service I deflection limits are in place with the purpose to prevent deformation-induced structural damage and psychological user discomfort from excess bridge vibration. Previous research has shown that deflection criterion alone is insufficient in controlling excess bridge vibrations and structural deterioration of the concrete deck. Previous research shows that natural frequency criteria better controls excess vibration than deflection criteria alone. In addition, previous research shows no significant correlation between deflection and structural deformation of the concrete deck slab. To better control excess bridge vibrations and deformation-induced structural deterioration, two new separate criteria formulations are proposed. The first formulation consists of a natural frequency criteria transformed into deflection-type terms familiar to the typical bridge engineer. The second proposed formulation directly controls the acting flexural strain in the concrete deck to control deformation-induced structural damage. The proposed serviceability criteria are applied to a database of 185 steel girder bridges. Both the as-built behavior and the design optimized behavior are examined and compared with current AASHTO serviceability criteria. The proposed user comfort and deformation-induced damage serviceability formulations are intended to be incorporated into ongoing Federal Highway Administration and bridge industry long-term bridge performance research where serviceability criteria is an important component.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
Special thanks to Mark Jablin and Jay Puckett from Bridge Tech, Laramie, WY, for the analysis of the bridge suite.
References
AASHTO. (2012). LRFD bridge design specifications, 6th Ed., AASHTO, Washington, DC.
AISC. (2003). AISC design guide 11: Floor vibrations due to human Activity, AISC, Chicago.
Allen, D. E., Murray, T. M., and Ungar, E. E. (1997). Design guide 11 floor vibrations due to human activity, AISC and Canadian Institute of Steel Construction, Chicago.
Aramraks, T. (1975). “Highway bridge vibration studies.” Rep. No. JHRP-75-2, Joint Highway Research Project, Indiana State Highway Commission, Purdue Univ., West Lafayette, IN.
ASCE. (1958). “Deflection limitation of a bridge.” J. Struct. Div., 84(Rep. No. ST3).
Australian Bridge Design Code. (1996). Section six—Code, steel and composite construction, Austroads, Haymarket, Australia.
Barth, K., Bergman, A., and Roeder, C. (2002). “Improved live load deflection criteria for steel bridges.” Report Prepared for National Cooperative Highway Research Program, Univ. of Washington, Seattle.
Barth, K. E., Roeder, C. W., Christopher, R. A., and Wu, H. (2003). “Evaluation of live load deflection criteria for I-shaped steel bridge design girders.” High Performance Materials in Bridges, Proc. of the International Conf., ASCE, Reston, VA, 193–208.
DeWolf, J. T., and Kou, J. W. (1997). “Vibrational behavior of continuous span highway bridge-influence variables.” J. Struct. Eng, 123(3), 333–344.
Fountain, R. S., and Thunman, C. E. (1987). “Deflection criteria for steel highway bridges.” Proc., National Eng. Conf., AISC, Chicago, 20-1–20-12.
Goodpasture, D. W., and Goodwin, W. A. (1971). “Final report on the evaluation of bridge vibration as related to bridge deck performance.” Tennessee Dept. of Transportation, Univ. of Tennessee, Knoxville, TN.
Nevels, J. B., and Hixon, D. C. (1973). “A study to determine the causes of bridge deck deterioration.” Final Report Prepared for State of Oklahoma Department of Highways, State of Oklahoma Dept. of Highways, Oklahoma City.
Ontario Ministry of Transportation and Communications Highway Engineering Division. (1983). Ontario highway bridge design code, 2nd Ed., Toronto.
Staebler, J. (2010). “Alternative steel serviceability limits to control excess bridge vibrations and structural deterioration.” M.S. thesis, Civil Engineering, Univ. of Wyoming, Laramie, WY.
Walker, W. H., and Wright, R. N. (1971). “Criteria for the deflection of steel bridges.” Bulletin for the American Iron and Steel Institute, AISC, Washington, DC.
Wu, H. (2003). “Influence of live-load deflections on superstructure performance of slab on steel stringer bridges.” Ph.D. thesis, College of Engineering and Mineral Resources, Univ. of West Virginia, Morgantown, WV.
Information & Authors
Information
Published In
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Feb 2, 2012
Accepted: Apr 18, 2012
Published online: Apr 20, 2012
Published in print: Jul 1, 2013
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.