Reliability-Based Calibration of Load and Resistance Factors for Design of RC Bridges under Multiple Extreme Events: Scour and Earthquake
Publication: Journal of Bridge Engineering
Volume 18, Issue 5
Abstract
A multihazard reliability-based framework is developed through this study to evaluate the structural response of RC bridges under the combined effects of pier scour and earthquake events. This framework is used to calibrate the scour load-modification factors for the design of bridges located in high seismic areas. Toward this goal, a series of case study bridges are investigated. For each bridge case, the joint probability of failure owing to scour and earthquake hazards is determined for a range of expected combinations of these two extreme events. The occurrence probability of each scour-earthquake scenario is identified by taking into account all of the major sources of load uncertainty through scour risk and seismic hazard curves. Furthermore, the uncertainties inherent in the structural response of bridges are included in the framework to improve the accuracy of estimated failure probabilities. The calculated probabilities are then compared with the maximum acceptable probability of failure (or its equivalent target reliability index) given by current design codes to obtain scour load-modification factors. The developed framework provides a reliable approach for the calibration of code specifications in the extreme event situations and can be extended to other combinations of natural hazards.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This paper is based on work supported by the FHwA through the Multidisciplinary Center for Earthquake Engineering Research (MCEER) under Contract No. DTFH61-08-C-00012 and Award No. 48348. The opinions, findings, and conclusions are those of the writers and do not necessarily reflect the views of the funding agencies.
References
AASHTO. (2007). AASHTO LRFD bridge design specifications, 4th ed., Washington, DC.
Allen, T. M., Nowak, A. S., and Bathurst, R. J. (2005). “Calibration to determine load and resistance factors for geotechnical and structural design.” Transportation research circular, No. E-C079, Transportation Research Board of the National Academics, Washington, DC.
American Petroleum Institute (API). (1993). “Recommended practice for planning, designing and constructing fixed offshore platforms.” Rep. No. RP 2A-WSD, 20th Ed., API Publishing Svcs., Washington, DC.
Bolduc, L. C., Gardoni, P., and Briaud, J.-L. (2008). “Probability of exceedance estimates for scour depth around bridge piers.” J. Geotech. Geoenviron. Eng., 134(2), 175–184.
California Department of Transportation (Caltrans). (2006). Caltrans seismic design criteria, Caltrans, Sacramento, CA.
Ellingwood, B. R. (2000). “LRFD: Implementing structural reliability in professional practice.” J. Engrg. Struct., 22(2), 106–115.
Federal Highway Administration (FHwA). (2001). “Evaluating scour at bridges.” Hydraulic Engineering Circular No. 18 (HEC-18), 4th Ed., FHwA, Washington, DC.
Fenves, G. L., and Ellery, M. (1998). “Behavior and failure analysis of a multiple-frame highway bridge in the 1994 Northridge earthquake.” Rep. No. PEER98/08, Pacific Earthquake Engineering Research Center, Univ. of California, Berkeley, CA.
Ghosn, M., Moses, F., and Wang, J. (2003). “Design of highway bridges for extreme events.” Design of highway bridges for extreme events, NCHRP Rep. 489, Transportation Research Board, Washington, DC.
HAZUS-MH/MR3. (2007). The Federal Emergency Management Agency’s (FEMA) methodology for estimating potential losses from disasters, U.S. Dept. of Homeland Security, Washington, DC.
Hida, S. E. (2007). “Statistical significance of less common load combinations.” J. Bridge Eng., 12(3), 389–393.
Johnson, P. (1995). “Comparison of pier-scour equations using field data.” J. Hydraul. Eng., 121(8), 626–629.
Johnson, P. (1996). “Uncertainty of hydraulic parameters.” J. Hydraul. Eng., 122(2), 112–114.
Johnson, P. A., and Dock, D. A. (1998). “Probabilistic bridge scour estimates.” J. Hydraul. Eng., 124(7), 750–754.
Lee, G. C., Tong, M., and Yen, W. P. (2008). “Design of highway bridges against extreme hazard events: Issues, principles and approaches.” Rep. No. MCEER-08-SP06, State Univ. of New York, Buffalo, NY.
Mander, J. B., Priestly, M. J. N., and Park, R. (1988). “Theoretical stress-strain model for confined concrete.” J. Struct. Div., 114(8), 1804–1826.
Nowak, A. S. (1999). “Simulation of LRFD bridge design code.” NCHRP Rep. 368, Transportation Research Board of the National Academics, Washington, DC.
OpenSees Development Team. (2009). “OpenSees: Open system for earthquake engineering simulation.” OpenSees Development Team, Berkeley, CA.
Priestley, M. J. N., Seible, F., and Calvi, G. M. (1996). Seismic design and retrofit of bridges, Wiley, NY.
Shinozuka, M., Feng, M. Q., Kim, H., Uzawa, T., and Ueda, T. (2003). “Statistical analysis of fragility curves.” Rep. No. MCEER-03-0002, Multidisciplinary Center for Earthquake Engineering Research, Buffalo, NY.
Shinozuka, M., Feng, M. Q., Kim, H. K., and Kim, S. H. (2000a). “Nonlinear static procedure for fragility curve development.” J. Eng. Mech., 126(12), 1287–1296.
Shinozuka, M., Feng, M. Q., Lee, J., and Naganuma, T. (2000b). “Statistical analysis of fragility curves.” J. Eng. Mech., 126(12), 1224–1231.
Somerville, P., Smith, N., Punyamurthula, S., and Sun, J. (1997). “Development of ground motion time histories for Phase 2 of the FEMA/SAC steel project.” Rep. No. SAC/BD-97/04, SAC joint venture, Sacramento, CA.
USGS. (2011). 〈www.earthquake.usgs.gov〉 (Mar. 30, 2011).
Information & Authors
Information
Published In
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Jun 30, 2011
Accepted: Jan 4, 2012
Published online: Jan 6, 2012
Published in print: May 1, 2013
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.