Design and Development of In Situ Fatigue Sensors for Structural Health Monitoring of Highway Bridges
Publication: Journal of Bridge Engineering
Volume 18, Issue 4
Abstract
Initial development work for an in situ fatigue sensor for the detection of fatigue damage in steel bridge structures is presented. The in situ fatigue sensor is designed to be bonded to the base structure and is based on the strain-life fatigue analysis method. Sensors are constructed of electrically conductive material with notched sensor arms producing varying stress concentration factors. The sensor operates on the principle of predictable progressive failure of the parallel arms as fatigue damage is accumulated in the base structure. Experimental results of the behavior of the fatigue sensor under constant amplitude loading of a base structure-mimicking carrier specimen are compared with the simulation results obtained by the finite-element analysis method and show reasonable agreement.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors acknowledge with gratitude the generous financial support provided by the Oklahoma Transportation Center under Grant No. OTCREOS7.1-36.
References
ANSYS Workbench 11.0 [Computer software]. Canonsburg, PA, ANSYS Inc.
Bannantine, J. A., Comer, J. J., and Handrock, J. L. (1990). Fundamentals of metal fatigue analysis, Prentice Hall, Englewood Cliffs, NJ.
Calvert, S., and Mooney, J. (2004). “Bridge structural health monitoring system using fiber grating sensors: Development and preparation for a permanent installation.” Proc., SPIE, 5391, 61.
Casas, J. R., and Cruz, P. J. S. (2003). “Fiber optic sensors for bridge monitoring.” J. Bridge Eng., 8(6), 362–373.
Chase, S. B. (2005). The role of sensing and measurement in achieving FHWA's strategic vision for highway infrastructure, sensing issues in civil structural health monitoring, F. Ansari, ed., Springer, Netherlands, 23–32.
Chase, S. B., and Washer, G. (1998). “Nondestructive evaluation for bridge management in the next century.” Pub. Roads, 61(1), 16–25.
Endo, T., and Morrow, J. (1969). “Cyclic stress-strain and fatigue behavior of representative aircraft metals.” ASTM J. Mater., 4(1), 159–175.
Federal Highway Administration (FHwA). (2011) “FHWA bridge programs NBI data.” Structures. 〈http://www.fhwa.dot.gov/bridge/mobility.cfm〉 (Sep. 18, 2011).
Fisher, J. W., Kulak, G. L., and Smith, I. F. C. (1998). Fatigue primer for structural engineers, AISC, Chicago.
Gongkang, F. (2004). Nondestructive testing for steel highway bridges, NDT methods applied to fatigue reliability assessment of structures, J. Mohammadi, ed., ASCE, Reston, VA, 23–31.
LabVIEW 8.5 [Computer software]. Austin, TX, National Instruments Corporation.
Lee, D. C., Lee, J. J., Kwon, I. B., and Seo, D. C. (2001). “Monitoring of fatigue damage of composite structures by using embedded intensity-based optical fiber sensors.” Smart Mater. Struct., 10(2), 285–292.
Lee, Y. L., Pan, J., Hathaway, R. B., and Barkey, M. E. (2005). Fatigue testing and analysis: Theory and practice, Elsevier, Burlington, MA.
MATLAB [Computer software]. Natick, MA, Mathworks, Inc.
Moore, P. O. (1998). Nondestructive testing handbook, C. N. Jackson Jr. and C. N. Sherlock, ed., American Society for Nondestructive Testing, Columbus, OH.
Nair, A., and Cai, C. S. (2010). “Acoustic emission monitoring of bridges: Review and case studies.” Eng. Struct., 32(6), 1704–1714.
Oklahoma Department of Transportation. (2006). Pontis Bridge inspection manual for Oklahoma Bridges, Oklahoma Department of Transportation—Bridge Division, Oklahoma City, OK.
Peterson, R. E. (1974). Stress concentration factors, Wiley, New York.
Pilkey, W. D. (1997). Peterson's stress concentration factors, Wiley, New York.
Pro/Engineer Wildfire 4.0 [Computer software]. Needham, MA, Parametric Technology Corporation (PTC).
Rakow, A., and Chang, F. K. (2007). “An in-situ sensor design for monitoring fatigue damage in bolted joints.” Proc., 6th Int. Workshop Struct. Health Monitor. (IWSHM), DEStech Publications, Stanford, CA 109–120.
Society of Automotive Engineers International (SAE International). (2010). 2010 SAE Handbook, SAEJ1397, The Society of Automotive Engineers International, Warrendale, PA.
Schulz, W. L., Udd, E., Seim, J. M., Laylor, H. M., McGill, G. E. (1998). “Single and multiaxis fiber grating based strain sensors for civil structure applications.” Proc., SPIE, International Society for Optical Engineering, Bellingham, WA, Vol. 3489, 71–214.
Son, J., and Mohammadi, J. (2004). NDT methods applied to fatigue reliability assessment of structures, a review of non-destructive test methods for bridges, J. Mohammadi, ed., ASCE, Reston, VA, 122–138.
Topper, T. H. (2009). “F.D.+E. experimental HTML fatigue database.” 〈http://fde.uwaterloo.ca/Fde/Materials/Alum/AA7xxx/aa7075T6_Endo_Morrow_non_os.html〉 (Jun. 16, 2008).
Vishay Precision Group. (2008). “Special use sensors—Crack propagation sensors.” 〈www.vishaymg.com〉 (Jun. 16, 2008).
Zhang, Y. (2006a). “In situ fatigue crack detection using piezoelectric paint sensor.” J. Intell. Mater. Syst. Struct., 17(10), 843–852.
Zhang, Y. H., and Tubby, P. J. (2006b). “Development of a fatigue sensor for welded steel structures.” Int. Conf. Resid. Fatig. Life. Ext. In-Serv. Struct., Joint Industry Project, Paris.
Information & Authors
Information
Published In
Copyright
© 2013 American Society of Civil Engineers.
History
Received: May 23, 2011
Accepted: Dec 13, 2011
Published online: Dec 14, 2011
Published in print: Apr 1, 2013
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.