Structural Redundancy Evaluation of Steel Tub Girder Bridges
Publication: Journal of Bridge Engineering
Volume 17, Issue 3
Abstract
As a result of construction problems with curved I-girders, increased tub girder research, and improved fabrication techniques, twin steel tub girder superstructures are increasingly more common for curved highway ramps. Historically, however, choosing a twin tub girder bridge instead of a bridge composed of three or four I-girders has resulted in a nonredundant or “fracture critical” designation for the bridge. This paper presents results from an analytic investigation of the redundancy of twin steel tub girder bridges. Parametric nonlinear finite-element analyses are used to determine the role of different bridge components in developing load transfer from a damaged girder to an undamaged girder. The key parameters of span length, bridge continuity, curvature, location of girder damage, and type and spacing of external bracing are investigated. The results of this study indicate that twin steel tub girder bridges can be classified as redundant if the bridge is designed in accordance with the AASHTO Load and Resistance Factor Design (LRFD) design code and additional design and proportioning criteria are incorporated. Minimum design criteria are proposed to allow for a redundant classification, thus reducing fabrication and maintenance/inspection costs for this increasingly popular bridge type.
Get full access to this article
View all available purchase options and get full access to this article.
References
AASHTO. (1978). “Guide specification for fracture critical nonredundant steel bridge members.” Washington, DC.
AASHTO. (1979). Standard specifications for highway bridges, 12th Ed., Washington, DC.
AASHTO. (2004). LRFD bridge design specifications (interims), 3rd Ed., Washington, DC.
ANSYS. (2007). ANSYS users manual, version 11.0, ANSYS, Inc., Canonsburg, PA.
CALTRANS. (2006). Seismic design criteria, California Dept. of Transportation, Sacramento, CA.
Crampton, D. D. et al. (2007). “Improving redundancy of two-girder bridges.” Paper No. 07-2573, Transportation Research Board, Washington, DC.
Ford, J. S., Chang, D. C., and Breen, J. E. et al. (1981). “Behavior of concrete columns under controlled lateral deformation.” J. Am. Concr. Inst.JACIAX, 78(1), 3–20.
Frank, K., and Williamson, E. (2006). “Fracture critical bridge test.” Univ. of Texas at Austin, Ferguson Structural Engineering Laboratory, Austin, TX.
Ghosn, M., and Moses, F. (1998). “Redundancy in highway bridge superstructures.” NCHRP Rep. 406, National Cooperative Highway Research Program, Washington, DC.
Hunley, C. A. (2008). “Structural redundancy of twin steel box girder bridges.” Ph.D. dissertation, Univ. of Kentucky, Lexington, KY.
Hunley, C. A., and Harik, I. E. (2007). “Redundancy of twin steel box girder bridges.” Proc., 2007 World Steel Bridge Symp., National Steel Bridge Alliance, Chicago, IL, 〈http://www.aisc.org/contentNSBA.aspx?id=20346〉 (Mar. 2012).
Ingeciber. (2007). CivilFEM users manual, version 11.0, Ingeciber, S.A., Madrid, Spain.
Kumarasena, S., et al. (2004). “Structural redundancy of steel box girder bridges.” Proc., 2004 FHWA Steel Bridge Conference, Federal Highway Administration, Washington, DC, 57–68.
Milwaukee Transportation Partners. (2005). “Redundancy of box girder steel bridges—A study for the Marquette interchange HPS twin box girder structures.” Project I.D. 1060-05-1222, Milwaukee, WI.
National Steel Bridge Alliance (NSBA). (2005). Practical steel tub girder design, Chicago, IL.
Tabsh, S. W. (1994). “Ductility of non-compact steel bridge beams.” Eng. J.EJASAR, 31(1), 21–30.
Task Committee on Redundancy of Flexural Systems of the ASCE-AASHTO Committee on Flexural Members of the Committee on Metals of the Structural Division. (1985). “State-of-the-art report on redundant bridge systems.” J. Struct. Eng.JSENDH, 111(12), 2517–2531.
Information & Authors
Information
Published In
Copyright
© 2012. American Society of Civil Engineers.
History
Received: Oct 15, 2010
Accepted: May 2, 2011
Published online: May 5, 2011
Published in print: May 1, 2012
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.