Full-Scale Test of Continuity Diaphragms in Skewed Concrete Bridge Girders
Publication: Journal of Bridge Engineering
Volume 16, Issue 1
Abstract
Continuity diaphragms used in prestressed girder bridges on skewed bents have caused difficulties in detailing and construction. The results of the field verification for the effectiveness of continuity diaphragms for skewed, continuous, and prestressed concrete girder bridges are presented. The current design concept and bridge parameters that were considered include skew angle and the ratio of beam spacing to span (aspect ratio). A prestressed concrete bridge with continuity diaphragms and a skewed angle of 48° was selected for full-scale test by a team of engineers from Louisiana Department of Transportation and Development and the Federal Highway Administration. The live load tests performed with a comprehensive instrumentation plan provided a fundamental understanding of the load transfer mechanism through these diaphragms. The findings indicated that the effects of the continuity diaphragms were negligible and they can be eliminated. The superstructure of the bridge could be designed with link slab. Thus, the bridge deck would provide the continuity over the support, improve the riding quality, enhance the structural redundancy, and reduce the expansion joint installation and maintenance costs.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
Support for this work was provided by Louisiana Transportation Research Center (LTRC) under research project number UNSPECIFIED06-3ST and state project number UNSPECIFIED736–99-1373. The contents of this study reflect the views of the writers who are responsible for the facts and the accuracy of the data presented herein. The contents do not necessarily reflect the official views or policies of the LA-DOTD or the LTRC. This paper does not constitute a standard, specification, or regulation.
References
AASHTO. (2002). Standard specifications for highway bridges, 17th Ed., Washington, D.C.
AASHTO. (2004). LRFD bridge design specification, 3rd Ed., Washington, D.C.
Bakht, B. (1988). “Analysis of some skew bridges as right bridges.” J. Struct. Eng., 114(10), 2307–2322.
Barth, A. S., and Bowman, M. D. (1999). “Fatigue behavior of intermittently welded diaphragm-to-beam connections.” Structures Congress, Structural Engineering in the 21st Century, ASCE, Reston, Va., 805–808.
Chen, Y. (1995). “Refined and simplified methods of lateral load distribution for bridges with unequally spaced girders: I. Theory and II. Applications.” Comput. Struct., 55(1), 1–32.
Chen, Y., and Aswad, A. (1996). “Stretching span capability of prestressed concrete bridges under AASHTO LRFD.” J. Bridge Eng., 1(3), 112–120.
GTSTRUDL version 28. (2005). Georgia Institute of Technology, Atlanta.
Hays, C. O., Sessions, L. M., and Berry, A. J. (1986). “Further studies on lateral load distribution using a finite element method.” Transportation Research Record. 1072, Transportation Research Board, Washington, D.C., 6–14.
Kennedy, J. B., and Grace, N. F. (1983). “Load distribution in continuous composite bridges.” Can. J. Civ. Eng., 10, 384–395.
Marx, H. J., Khachaturian, N., and Gamble, W. L. (1986). “Development and design criteria for simply supported skew slab-and-girder bridges.” Civil Engineering Studies, Structural Research Series No. 522, Univ. of Illinois, Urbana, Ill.
Nassif, H. H., and Nowak, A. S. (1995). “Dynamic load factor for girder bridges.” Transportation Research Record. 1476, National Academy, Washington, D.C.
National Cooperative Highway Research Program (NCHRP). (2004). Rep. 519, Washington, D.C.
Nutt, R. V., Zokaie, T., and Schamber, R. A. (1987). “Distribution of wheel loads on highway bridges.” Project No. 12-26, NCHRP, Transportation Research Board, National Research Council, Washington, D.C.
Saber, A. (1998). “High performance concrete: Behavior, design and materials in pretensioned AASHTO and NU Girders.” Ph.D. thesis, Georgia Institute of Technology, Atlanta.
Saber, A. (2009). “Field verification for the effectiveness of continuity diaphragms for skewed continuous P/C P/S concrete girder bridges.” LADOTD-LTRC Rep. FHWA/LA/440, LTRC, Baton Rouge.
Saber, A., and Kahn, L. (2005). “Stability of long-span pretensioned high performance concrete girders.” Proc., 7th Int. Conf. on High Performance Concrete, ACI, Farmington Hills, Mich.
Saber, A., Roberts, F., Toups, J., and Alaywan, W. (2007). “Effects of continuity diaphragm for skewed continuous span precast prestressed concrete girder bridges.” Precast/Prestressed Concrete Institute (PCI) Journal. 2, 108–114.
Saber, A., Toups, J., and Alaywan, W. (2005). “Effects of continuity on load transfer in prestressed concrete skewed bridges.” Proc., 3rd Int. Structural Engineering and Construction Conf., Taylor and Francis, New York.
Saber, A., Toups, J., Guice, L., and Tayebi, A. (2003). “Continuity diaphragm for skewed continuous span precast prestressed concrete girder bridges.” LADOTD-LTRC Rep. FHWA/LA 04/383, LTRC, Baton Rouge.
Sanders, W. W., and Elleby, H. A. (1970). “Distribution of wheel loads on highway bridges.” National Cooperative Highway Research Program Rep. No. 83, Highway Research Board, Washington, D.C.
Sengupta, S., and Breen, J. E. (1973). “The effect of diaphragms in prestressed concrete girder and slab bridges.” Res. Rep. 1581F, Texas Univ., Austin Center for Highway Research, Texas.
Stanton, J. F., and Mattock, A. H. (1986). “Load distribution and connection design for precast stemmed mu1tibeam bridge superstructures.” National Cooperative Highway Research Program Rep. No. 287, Transportation Research Board, Washington, D.C.
Tarhini, K. M., and Frederick, G. R. (1995). “Lateral load distribution in I-Girder bridges.” Comput. Struct., 54(2), 351–354.
Wong, A., and Gamble, W. (1973). “Effects of diaphragms in continuous slab and girder highway bridges.” Civil Engineering Studies Structural Research Series No. 391, Dept. of Civil Engineering, Univ. of Illinois, Urbana, Ill.
Information & Authors
Information
Published In
Copyright
© 2011 ASCE.
History
Received: Sep 4, 2009
Accepted: Mar 18, 2010
Published online: Mar 25, 2010
Published in print: Jan 2011
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.