Numerical Study on the Effect of Vortex Generators on S-Shaped Intake in Propeller Slipstream
Publication: Journal of Aerospace Engineering
Volume 35, Issue 3
Abstract
In turboprop engines, the lip of the S-shaped intake is behind the propeller rotation plane, so the complex slipstream flowfield has a strong impact on the flowfield in the S-shaped intake and affects engine performance. The present work attempts to improve the flowfield in the S-shaped intake in turboprop engines by using vortex generators. The research was carried out by solving Reynolds-averaged Navier–Stokes equations employed SST turbulence model. An attempt was made to explore the vortex generators’ effect on S-shaped intake performance in the propeller slipstream. The results show that the total pressure recovery coefficient and distortion coefficient change periodically with time for the S-shaped intake in the propeller slipstream. For S-shaped intake with vortex generators (, 12-mm height, 18° with the incoming flow) in the propeller slipstream, the vortices induced by the vortex generators are coupled with the propeller slipstream, which effectively inhibits flow separation in the S-shaped intake for turboprop engine and improves air quality on the aerodynamic interface plane (AIP) section of the S-shaped intake.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request.
References
Anderson, B. H., D. R. Reddy, and K. Kapoor. 1994. “Study on computing separating flows within a diffusion inlet S-duct.” J. Propul. Power 10 (5): 661–667. https://doi.org/10.2514/3.23777.
Banach, H. J., and C. N. Reynolds. 1984. “Turboprop engine propulsion for the 1990’s.” J. Aircr. 21 (4): 238–243. https://doi.org/10.2514/3.48253.
Delot, A.-L., E. Garnier, and D. Pagan. 2011. “Flow control in a high-offset subsonic air intake.” In Proc., 47th AIAA/ASME/SAE/ASEE Joint Propulsion Conf. & Exhibit. Reston, VA: American Institute of Aeronautics and Astronautics.
Fiola, C., and R. K. Agarwal. 2015. “Simulation of secondary and separated flow in diffusing S ducts.” J. Propul. Power 31 (1): 180–191. https://doi.org/10.2514/1.B35275.
Gea, L.-M. 2013. “CFD simulation for S-duct test case using overset grids.” In Proc., 49th AIAA/ASME/SAE/ASEE Joint Propulsion Conf. Reston, VA: American Institute of Aeronautics and Astronautics.
Harloff, G., B. Reichert, and S. Wellborn. 1992. “Navier–Stokes analysis and experimental data comparison of compressible flow in a diffusing S-duct.” In Proc., 10th Applied Aerodynamics Conf. Reston, VA: American Institute of Aeronautics and Astronautics.
Kumar Gopaliya, M., M. Kumar, S. Kumar, and S. Manjaree Gopaliya. 2007. “Analysis of performance characteristics of S-shaped diffuser with offset.” Aerosp. Sci. Technol. 11 (2–3): 130–135. https://doi.org/10.1016/j.ast.2006.11.003.
Lie-Mine, G. 2015. “CFD simulation of serpentine S-duct with flow control.” In Proc., 51st AIAA/SAE/ASEE Joint Propulsion Conf. Reston, VA: American Institute of Aeronautics and Astronautics.
Lin, J. C. 2002. “Review of research on low-profile vortex generators to control boundary layer separation.” Aerosp. Sci. Technol. 38 (May): 389–420. https://doi.org/10.1016/S0376-0421(02)00010-6.
Menter, F. R. 1994. “Two-equation eddy-viscosity turbulence models for engineering applications.” AIAA J. 32 (8): 1598–1605. https://doi.org/10.2514/3.12149.
Ng, Y. T., S. C. Luo, T. T. Lim, and Q. W. Ho. 2011. “Three techniques to control flow separation in an S-shaped duct.” AIAA J. 49 (9): 1825–1832. https://doi.org/10.2514/1.J050135.
Paul, A. R., P. Ranjan, V. K. Patel, and A. Jain. 2013. “Comparative studies on flow control in rectangular S-duct diffuser using submerged-vortex generators.” Aerosp. Sci. Technol. 28 (1): 332–343. https://doi.org/10.1016/j.ast.2012.11.014.
Reza Ahrabi, B., K. Sreenivas, and R. S. Webster. 2013. “Computational investigation of compressible flow in a diffusing S-duct.” In Proc., 49th AIAA/ASME/SAE/ASEE Joint Propulsion Conf. Reston, VA: American Institute of Aeronautics and Astronautics.
Ruiz-Calavera, L., D. Funes-Sebastian, and D. Perdones-Diaz. 2010. “Powered model wind tunnel tests of a high-offset subsonic turboprop air intake.” In Proc., 46th AIAA/ASME/SAE/ASEE Joint Propulsion Conf. & Exhibit Nashville. Reston, VA: American Institute of Aeronautics and Astronautics.
Sun, S., H.-J. Tan, and C.-X. Wang. 2016. “Submerged inlet performance enhancement using a unique bump-shaped vortex generator.” J. Propul. Power 32 (5): 1275–1280. https://doi.org/10.2514/1.B36085.
Tanguy, G., D. G. MacManus, P. Zachos, D. Gil-Prieto, and E. Garnier. 2017. “Passive flow control study in an S-duct using stereo particle image velocimetry.” AIAA J. 55 (6): 1862–1877. https://doi.org/10.2514/1.J055354.
Vakili, A., J. Wu, P. Liver, and M. Bhat. 1985. “Flow control in a diffusing S-duct.” In Proc., Shear Flow Control Conf. Reston, VA: American Institute of Aeronautics and Astronautics.
Wellborn, S. R., B. A. Reichert, and T. H. Okiishi. 1994. “Study of the compressible flow in a diffusing S-duct.” J. Propul. Power 10 (5): 668–675. https://doi.org/10.2514/3.23778.
Wendt, B. J., and B. A. Reichert. 1996. “Vortex ingestion in a diffusing S-duct inlet.” J. Aircr. 33 (1): 149–154. https://doi.org/10.2514/3.46915.
Wojewodka, M. M., C. White, S. Shahpar, and K. Kontis. 2018. “A review of flow control techniques and optimisation in S-shaped ducts.” Int. J. Heat Fluid Flow 74 (Dec): 223–235. https://doi.org/10.1016/j.ijheatfluidflow.2018.06.016.
Zhang, Y., S. Hu, X. Zhang, M. Benner, A. Mahallati, and E. Vlasic. 2014. “Flow control in an aggressive interturbine transition duct using low profile vortex generators.” J. Eng. Gas Turbines Power 136 (11): 112604. https://doi.org/10.1115/1.4027656.
Information & Authors
Information
Published In
Copyright
© 2022 American Society of Civil Engineers.
History
Received: Mar 8, 2021
Accepted: Nov 29, 2021
Published online: Feb 14, 2022
Published in print: May 1, 2022
Discussion open until: Jul 14, 2022
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Lishu Hao, Bao Hu, Yongwei Gao, Binbin Wei, Effect of vortex generator spanwise height distribution pattern on aerodynamic characteristics of a straight wing, Advances in Aerodynamics, 10.1186/s42774-023-00137-1, 5, 1, (2023).