Nacelle Inlet Optimization at High Angles of Attack Based on the Ensemble Indicator Method
Publication: Journal of Aerospace Engineering
Volume 35, Issue 2
Abstract
Inlet separation is one of the primary sources of distortion at fan entrances. High angles of attack (AOAs) are the critical cause of inlet separation. Optimizing the inlet shape to increase the separation angle is of great engineering significance. However, calculating the separation angles of different inlet shapes requires extensive computation. To address this problem, an ensemble indicator, the antiseparation potential index (ASPI), is proposed in this paper. The ASPI is based on the circumferential distortion index (IDC) of the engine under multiple AOAs. The characteristics of both the separation angle and distortion level are comprehensively reflected in the ASPI. The use of this index can avoid the need for an enormous amount of computation and can better describe the ability of the inlet to resist separation at a higher AOA, both of which are more suitable for inlet design. A Kriging–particle swarm optimization (PSO) design model was applied to tackle the high-cost computational fluid dynamics (CFD) simulations and search for an optimal solution. The results show that the critical AOA at which intake separation occurs is successfully increased by approximately 8°, demonstrating the feasibility of the ASPI in engineering design.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
The data used to support the observations of this study are available from the corresponding author upon request.
References
Aravind, T., B. S. Reddy, S. Avinash, and G. Jeyakumar. 2019. “A comparative study on machine learning algorithms for predicting the placement information of under graduate students.” In Proc., 2019 3rd Int. Conf. on I-SMAC (IoT in Social, Mobile, Analytics and Cloud) (I-SMAC), 542–546. New York: IEEE.
Burley, R. 1979. “Effect of lip and centerbody geometry on aerodynamic performance of inlets for tilting-nacelle VTOL aircraft.” In Proc., 17th Aerospace Sciences Meeting. Reston, VA: American Institute of Aeronautics and Astronautics.
Chen, J., Y. Wu, Z. Wang, and A. Wang. 2015. “Nacelle aerodynamic optimization and inlet compatibility.” In Proc., ASME Turbo Expo 2015: Turbine Technical Conf. and Exposition. New York: ASME.
Chou, D. C., and D. Hwang. 1984. “Boundary layer transition effects on flow separation around V/STOL engine inlets at high incidence.” In Proc., 22nd Aerospace Sciences Meeting. Reston, VA: American Institute of Aeronautics and Astronautics.
Chou, D. C., R. W. Luidens, and N. O. Stockman. 1978. “Prediction of boundary-layer flow separation in V/STOL engine inlets.” J. Aircr. 15 (8): 474–481. https://doi.org/10.2514/3.58393.
Ding, Y., W. Zhang, L. Yu, and K. Lu. 2019. “The accuracy and efficiency of GA and PSO optimization schemes on estimating reaction kinetic parameters of biomass pyrolysis.” Energy 176 (Jun): 582–588. https://doi.org/10.1016/j.energy.2019.04.030.
Hirose, N., K. Asai, and R. Kawamura. 1989. “3D-Euler flow analysis of fanjet engine and turbine powered simulator with experimental comparison in transonic speed.” In Proc., 20th Fluid Dynamics, Plasma Dynamics and Lasers Conf. Reston, VA: American Institute of Aeronautics and Astronautics.
Hodder, B. K. 1981. An investigation of engine influence on inlet performance. Washington, DC: National Aeronautics and Space Administration (NASA).
Huang, J., Z. Zhou, Z. Gao, M. Zhang, and L. Yu. 2017. “Aerodynamic multi-objective integrated optimization based on principal component analysis.” Chin. J. Aeronaut. 30 (4): 1336–1348. https://doi.org/10.1016/j.cja.2017.05.003.
Kennedy, S., T. Robinson, S. Spence, and J. Richardson. 2014. “Computational investigation of inlet distortion at high angles of attack.” J. Aircr. 51 (2): 361–376. https://doi.org/10.2514/1.C031789.
Kulfan, B., and J. Bussoletti. 2006. “‘Fundamental’ parametric geometry representations for aircraft component shapes.” In Proc., 11th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conf. Reston, VA: American Institute of Aeronautics and Astronautics.
Kulfan, B. M. 2008. “Universal parametric geometry representation method.” J. Aircr. 45 (1): 142–158. https://doi.org/10.2514/1.29958.
Lane, K., and D. Marshall. 2010. “Inverse airfoil design utilizing CST parameterization.” In Proc., 48th AIAA Aerospace Sciences Meeting. Reston, VA: American Institute of Aeronautics and Astronautics.
Liu, H., H. Tian, C. Chen, and Y. Li. 2013. “An experimental investigation of two wavelet-MLP hybrid frameworks for wind speed prediction using GA and PSO optimization.” Int. J. Electr. Power Energy Syst. 52 (Nov): 161–173. https://doi.org/10.1016/j.ijepes.2013.03.034.
Majić, F., G. Efraimsson, and C. O’Reilly. 2015. “Aerodynamic performance of the adaptive nacelle inlet.” In Proc., 33rd AIAA Applied Aerodynamics Conf. Reston, VA: American Institute of Aeronautics and Astronautics.
Majić, F., G. Efraimsson, and C. J. O’Reilly. 2016. “Potential improvement of aerodynamic performance by morphing the nacelle inlet.” Aerosp. Sci. Technol. 54 (Jul): 122–131. https://doi.org/10.1016/j.ast.2016.04.006.
Masters, D. A., N. J. Taylor, T. C. S. Rendall, C. B. Allen, and D. J. Poole. 2017. ““Geometric comparison of aerofoil shape parameterization methods.” AIAA J. 55 (5): 1575–1589. https://doi.org/10.2514/1.J054943.
Miller, B. A. 1976. “Inlets for high angles of attack.” J. Aircr. 13 (4): 319–320. https://doi.org/10.2514/3.44528.
Mokarram, V., and M. R. Banan. 2018. “A new PSO-based algorithm for multi-objective optimization with continuous and discrete design variables.” Struct. Multidiscip. Optim. 57 (2): 509–533. https://doi.org/10.1007/s00158-017-1764-7.
Motycka, D. L. 1985. “Reynolds number and fan/inlet coupling effects on subsonic transportinlet distortion.” J. Propul. Power 1 (3): 229–234. https://doi.org/10.2514/3.22785.
Motycka, D. L., S. Welling, and F. Lewis-Smith. 1984. “Comparison of model and full scale inlet distortions for subsonic commercial transport inlets.” In Proc., Aircraft Design Systems and Operations Meeting. Reston, VA: American Institute of Aeronautics and Astronautics.
Shmilovich, A. 1990. “Calculation of transonic flows with separation past arbitrary inletsat incidence.” AIAA J. 28 (4): 601–609. https://doi.org/10.2514/3.10435.
Tao, J., G. Sun, L. Guo, and X. Wang. 2020. “Application of a PCA-DBN-based surrogate model to robust aerodynamic design optimization.” Chin. J. Aeronaut. 33 (6): 1573–1588. https://doi.org/10.1016/j.cja.2020.01.015.
Tian, Y., X. Qu, P. Liu, and S. Yan. 2017. “Platform for transport aircraft wing–body parametric modeling and high-lift system design.” J. Aerosp. Eng. 30 (5): 06017004. https://doi.org/10.1061/(ASCE)AS.1943-5525.0000761.
Toal, D. J. J., N. W. Bressloff, A. J. Keane, and C. M. E. Holden. 2010. “Geometric filtration using proper orthogonal decomposition for aerodynamic design optimization.” AIAA J. 48 (5): 916–928. https://doi.org/10.2514/1.41420.
Toubin, H., I. S. E. Din, and M. Meheut. 2014. “Multipoint aerodynamic high fidelity shape optimization of an isolated engine nacelle.” In Proc., 52nd Aerospace Sciences Meeting. Reston, VA: American Institute of Aeronautics and Astronautics.
Wang, S., C. Wang, and G. Sun. 2020. “The objective space and the formulation of design requirement in natural laminar flow optimization.” Appl. Sci. 10 (17): 5943. https://doi.org/10.3390/app10175943.
Wei, H., H. Li, M. Xia, Y. Wang, and H. Qu. 2020. “Predicting student performance in interactive online question pools using mouse interaction features.” In Proc., 10th Int. Conf. on Learning Analytics & Knowledge, LAK ’20, 645–654. New York: Association for Computing Machinery.
Zhang, Z., A. Hou, Y. Chen, W. Tuo, and A. Xia. 2013. “Numerical and test investigation on an aircraft inlet distortion.” Int. J. Turbo Jet Engines 30 (3): 231–241. https://doi.org/10.1515/tjj-2013-0021.
Information & Authors
Information
Published In
Copyright
© 2022 American Society of Civil Engineers.
History
Received: Apr 1, 2021
Accepted: Nov 22, 2021
Published online: Jan 3, 2022
Published in print: Mar 1, 2022
Discussion open until: Jun 3, 2022
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.