Improved Mixed-Mode Bending Test Apparatus through Analytical Modeling and Finite-Element Optimization for Improved Characterization
Publication: Journal of Aerospace Engineering
Volume 35, Issue 1
Abstract
The compliance of the mixed-mode bending (MMB) test fixtures can influence the interlaminar fracture toughness measurements for different mixed-mode ratios in an unpredictable way. The purpose of this article is to introduce the improved mixed-mode bending (IMMB) apparatus with slight modifications to the current MMB apparatus and universally recognized by current standards. The MMB apparatus is used to measure any Mode I to Mode II strain energy release rate (SERR) ratio from 0 to approximately 5. The original MMB components were investigated using a finite-element optimization algorithm and an analytical model for exploring the relationship between the component’s stiffnesses and MMB compliance. Two IMMB designs are presented. The first design addresses MMB’s compliance by modifying the dimensions of the most impactful components. The second design introduces new components in addition to dimensional changes to maximally increase MMB stiffness. The new designs enhance the MMB apparatus’s stiffness by 27% and 87%, respectively.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
This work has been completed as a part of undergraduate research without any funding.
References
Aliha, M. M. R., H. G. Kucheki, and M. Mirsayar. 2021. “Mixed mode I/II fracture analysis of Bi-material adhesive bonded joints using a novel short beam specimens.” Appl. Sci. 11 (11): 5232. https://doi.org/10.3390/app11115232.
Aliha, M. R. M., M. H. Kalantari, S. M. N. Ghoreishi, A. R. Torabi, and S. Etesam. 2019. “Mixed mode I/II crack growth investigation for bi-metal FSW aluminum alloy AA7075/T6 pure copper joints.” Theor. Appl. Fract. Mech. 103 (Sep): 102243. https://doi.org/10.1016/j.tafmec.2019.102243.
Arcan, M., Z. Hashin, and A. Voloshin. 1978. “A method to produce uniform plane-stress states with applications to fiber-reinforced materials.” Exp. Mech. 18 (4): 141–146. https://doi.org/10.1007/BF02324146.
ASTM. 2001. Standards test method for mixed mode I-mode II interlaminar fracture toughness of unidirectional fiber reinforced polymer matrix composites. ASTM D6671-01. West Conshohocken, PA: ASTM.
ASTM. 2019. Standards test method for mixed mode I-mode II interlaminar fracture toughness of unidirectional fiber reinforced polymer matrix composites. ASTM D6671/D6671M-19. West Conshohocken, PA: ASTM.
Benzeggagh, M., and M. Kenane. 1996. “Measurement of mixed-mode delamination fracture toughness of unidirectional glass/epoxy composites with mixed-mode bending apparatus.” Compos. Sci. Technol. 56 (4): 439–449. https://doi.org/10.1016/0266-3538(96)00005-X.
Bonhomme, J., A. Argüelles, J. Viña, and I. Viña. 2009. “Fractography and failure mechanisms in static mode I and mode II delamination testing of unidirectional carbon reinforced composites.” Polym. Test. 28 (6): 612–617. https://doi.org/10.1016/j.polymertesting.2009.05.003.
Bonhomme, J., A. Argüelles, J. Viña, I. Viña, and V. Mollon. 2010. “Compliance correction for numerical and experimental determination of mode I and mode II composite fracture failure.” Mech. Adv. Mater. Struct. 17 (5): 377–381. https://doi.org/10.1080/15376494.2010.488617.
Bradley, W. L., and R. N. Cohen. 1985. Matrix deformation and fracture in graphite-reinforced epoxies. ASTM STP 876. West Conshohocken, PA: ASTM.
Cater, C. R., X. Xiao, R. K. Goldberg, and L. W. Kohlman. 2015. “Single ply and multi-ply braided composite response predictions using modified subcell approach.” J. Aerosp. Eng. 28 (5): 04014117. https://doi.org/10.1061/(ASCE)AS.1943-5525.0000445.
Chen, J., R. Sernow, E. Schulz, and G. Hinrichsen. 1999. “A modification of the mixed-mode bending test apparatus.” Composites, Part A 30 (7): 871–877. https://doi.org/10.1016/S1359-835X(98)00193-6.
Crews, J. H., and J. R. Reeder. 1988. A mixed-mode bending apparatus for delamination testing. Hampton, VA: Langley Research Center.
Daneshjoo, Z., L. Amaral, R. Alderliesten, M. Shokrieh, and M. Fakoor. 2019. “Development of a physics-based theory for mixed mode I/II delamination onset in orthotropic laminates.” Theor. Appl. Fract. Mech. 103 (Oct): 102303. https://doi.org/10.1016/j.tafmec.2019.102303.
Ducept, F., P. Davies, and D. Gamby. 1997. “An experimental study to validate tests used to determine mixed mode failure criteria of glass/epoxy composites.” Composites, Part A 28 (8): 719–729. https://doi.org/10.1016/S1359-835X(97)00012-2.
Hashemi, S., A. J. Kinloch, and J. G. Williams. 1987. “Interlaminar fracture of composite materials.” In Vol. 3 of Proc., Int. Conf. on Composite Materials and Second European Conf. on Composite Materials, 3.254–3.264. Hannover, Germany: Leibniz Universität.
Johnson, W. S. 1987. “Stress analysis of the crack-lap-shear specimen: An ASTM round-robin.” J. Test. Eval. 15 (6): 303–324. https://doi.org/10.1520/JTE11028J.
Khansari, N., A. Farrokhi, and A. Mosavi. 2019. “Orthotropic mode II shear test fixture: Iosipesque modification.” Eng. Solid Mech. 7 (2): 93–108. https://doi.org/10.5267/j.esm.2019.4.003.
Kinloch, A., Y. Wang, J. Williams, and P. Yayla. 1993. “The mixed-mode delamination of fibre composite materials.” Compos. Sci. Technol. 47 (3): 225–237. https://doi.org/10.1016/0266-3538(93)90031-B.
Kolluri, M., M. H. Thissen, J. P. Hoefnagels, J. A. Dommelen, and M. G. Geers. 2008. “Advanced miniature mixed mode bending setup for in-situ interface delamination characterization.” In Proc., EuroSimE 2008—Int. Conf. on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Micro-Systems. New York: IEEE. https://doi.org/10.1109/esime.2008.4525090.
Littell, J. D., W. K. Binienda, G. D. Roberts, and R. K. Goldberg. 2009. “Characterization of damage in triaxial braided composites under tensile loading.” J. Aerosp. Eng. 22 (3): 270–279. https://doi.org/10.1061/(ASCE)0893-1321(2009)22:3(270).
Martin, R. 1996. “Interlaminar fracture characterization.” In Key engineering materials, 329–346. Freienbach, Switzerland: Trans Tech Publications Ltd. https://doi.org/10.4028/www.scientific.net/KEM.120-121.329.
Mathews, M., and S. Swanson. 2007. “Characterization of the interlaminar fracture toughness of a laminated carbon/epoxy composite.” Compos. Sci. Technol. 67 (7–8): 1489–1498. https://doi.org/10.1016/j.compscitech.2006.07.035.
Mirsayar, M., X. Shi, and D. Zollinger. 2017. “Evaluation of interfacial bond strength between Portland cement concrete and asphalt concrete layers using bi-material SCB test specimen.” Eng. Solid Mech. 5 (4): 293–306. https://doi.org/10.5267/j.esm.2017.8.001.
Mollon, V., J. Bonhomme, J. Vina, and A. Argüelles. 2010. “Mixed mode fracture toughness: An empirical formulation for GI/GII determination in asymmetric DCB specimens.” Eng. Struct. 32 (11): 3699–3703. https://doi.org/10.1016/j.engstruct.2010.08.014.
O’Brien, T. K., N. J. Johnston, I. S. Raju, D. H. Morris, and R. A. Simmonds. 1987. Comparisons of various configurations of the edge delamination test for interlaminar fracture toughness. ASTM STP 937. West Conshohocken, PA: ASTM.
Pereira, F. A. M., M. F. S. F. de Moura, N. Dourado, J. J. L. Morais, F. G. A. Silva, and M. I. R. Dias. 2016. “Bone fracture characterization under mixed-mode I + II loading using the MMB test.” Eng. Fract. Mech. 166 (Oct): 151–163. https://doi.org/10.1016/j.engfracmech.2016.08.011.
Pflugler, N., G. M. Reuther, M. Goroll, D. Udiljak, R. Pufall, and B. Wunderle. 2019 “Experimental determination of critical adhesion energies with the advanced button shear test.” Microelectron. Reliab. 99 (Aug): 177–185. https://doi.org/10.1016/j.microrel.2019.
Reeder, J. R. 1992. An evaluation of mixed-mode delamination failure criteria. Hampton, VA: Langley Research Center.
Reeder, J. R. 2000. Refinements to the mixed-mode bending test for delamination toughness. Hampton, VA: Langley Research Center.
Reeder, J. R. 2003. “Refinements to the mixed-mode bending test for delamination toughness.” J. Compos. Technol. Res. 25 (4): 1–5.
Reeder, J. R., and J. H. Crews. 1990. “Mixed-mode bending method for delamination testing.” AIAA J. 28 (7): 1270–1276. https://doi.org/10.2514/3.25204.
Reeder, J. R., and J. H. Crews Jr. 1992. “Redesign of the mixed-mode bending delamination test to reduce nonlinear effects.” J. Compos. Technol. Res. 14 (1): 12. https://doi.org/10.1520/CTR10078J.
Russell, A. J., and K. N. Street. 1985. Moisture and temperature effects on the mixed-mode delamination fracture of unidirectional graphite/epoxy. ASTM STP 876. West Conshohocken, PA: ASTM.
Shokrieh, M. M., A. Zeinedini, and S. M. Ghoreishi. 2017. “On the mixed mode I/II delamination R-curve of E-glass/epoxy laminated composites.” Compos. Struct. 171 (Jul): 19–31. https://doi.org/10.1016/j.compstruct.2017.03.017.
Stamoulis, G., N. Carrere, J. Y. Cognard, P. Davies, and C. Badulescu. 2014. “On the experimental mixed-mode failure of adhesively bonded metallic joints.” Int. J. Adhes. Adhes. 51 (Jun): 148–158. https://doi.org/10.1016/j.ijadhadh.2014.03.002.
Szekrényes, A. 2006. “Prestressed fracture specimen for delamination testing of composites.” Int. J. Fract. 139 (2): 213–237. https://doi.org/10.1007/s10704-006-0043-1.
Torabi, A. R., M. H. Kalantari, and M. R. M. Aliha. 2018. “Fracture analysis of dissimilar A-Al friction stir welded joints under tensile/shear loading.” Fatigue Fract. Eng. Mater. Struct. 41 (9): 2040–2053. https://doi.org/10.1111/ffe.12841.
Tracy, G. D., P. Feraboli, and K. T. Kedward. 2003. “A new mixed mode test for carbon/epoxy composite systems.” Composites, Part A 34 (11): 1125–1131. https://doi.org/10.1016/S1359-835X(03)00205-7.
Troughton, M. J. 2008. “Chapter 18—Mechanical fastening.” In Handbook of plastics joining: A practical guide. 2nd ed., 175–201. Norwich, UK: William Andrew.
Yekani Fard, M., A. Chattopadhyay, and Y. Liu. 2014. “Influence of load type and stress gradient on flexural strength of an epoxy resin polymeric material.” J. Aerosp. Eng. 27 (1): 55–63. https://doi.org/10.1061/(ASCE)AS.1943-5525.0000228.
Yekani Fard, M., Y. Liu, and A. Chattopadhyay. 2012. “Characterization of epoxy resin including strain rate effects using digital image correlation system.” J. Aerosp. Eng. 25 (2): 308–319. https://doi.org/10.1061/(ASCE)AS.1943-5525.0000127.
Yekani Fard, M., B. Raji, and H. Pankretz. 2020. “Correlation of nanoscale interface debonding and multimode fracture in polymer carbon composites with long-term hygrothermal effects.” J. Mech. Mater. 150 (Nov): 103601. https://doi.org/10.1016/j.mechmat.2020.103601.
Yekani Fard, M., B. Raji, J. Woodward, and M. Padilla. 2019a. “Experimental characterization of damage mechanisms of seamless net-shaped circular pre-form and overlapped stitched composite pipes.” Polym. Test. 78 (Sep): 105934. https://doi.org/10.1016/j.polymertesting.2019.105934.
Yekani Fard, M., B. Raji, J. M. Woodward, and A. Chattopadhyay. 2019b. “Characterization of interlaminar fracture modes I, II, and I-II of carbon/epoxy composites including in-service related bonding quality conditions.” J. Polym. Test. 77 (Sep): 105894. https://doi.org/10.1016/j.polymertesting.2019.05.010.
Information & Authors
Information
Published In
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Jan 15, 2021
Accepted: Sep 14, 2021
Published online: Oct 28, 2021
Published in print: Jan 1, 2022
Discussion open until: Mar 28, 2022
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Masoud Yekani Fard, Hannah Seyler, Aditi Tata, Yesenia Orozco, CNT Network Size/Interphase and Multimode Interlaminar Fracture of CNT Buckypaper Nanocomposites, AIAA SCITECH 2023 Forum, 10.2514/6.2023-1133, (2023).