Truck Weight Limit for Simply Supported Steel Girder Bridges Based on Bridge Fatigue Reliability
Publication: Journal of Aerospace Engineering
Volume 31, Issue 6
Abstract
The objective of this study was to present a new approach for determining the truck weight limit of simply supported steel girder bridges. This approach is based on the fatigue reliability of bridge girders under the action of random traffic flows considering the presence of multiple trucks. A simply supported steel girder bridge designed according to the current codes was used as the bridge model to illustrate the presented approach. Based on the collected traffic data from Wisconsin, random traffic flows were generated using the Monte Carlo method and were used as the traffic loading. Numerical simulations were carried out to investigate the effects of three important parameters, including the fraction of traffic in the fast lane (), violation rate (), and truck weight limit (), on the average fatigue damage accumulation () induced by each truck in the random traffic flow. Based on the Miner’s cumulative damage model and the S-N curve, the effects of these parameters on the fatigue reliability index of bridge girders were also analyzed. The truck weight limit that can ensure the target fatigue reliability of the bridge girders after 75 years of service was determined based on the fatigue reliability analysis of the bridge girder.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors would like to acknowledge the financial support provided by the National Natural Science Foundation of China (Grant Nos. 51478176 and 51778222) and the Fundamental Research Funds for Central Universities through the Young Teacher Growth Plan of Hunan University (Grant No. 531107051014).
References
AASHTO. 2012. AASHTO LRFD bridge design specifications. 6th ed. Washington, DC: AASHTO.
Albrecht, P., and I. M. Friedland. 1979. “Fatigue-limit effect on variable-amplitude fatigue of stiffeners.” J. Struct. Div. 105 (12): 2657–2675.
Al-Yagout, M. A., J. P. Mahoney, L. M. Pierce, and M. E. Hallenbeck. 2002. Improving traffic characterization to enhance pavement design and performance: Load spectra development. Seattle: Washington State Transportation Center TRAC, Univ. of Washington.
Asantey, S. B., and F. Bartlett. 2005. “Impact of posted load limits on highway bridge reliability.” J. Bridge Eng. 10 (3): 321–330. https://doi.org/10.1061/(ASCE)1084-0702(2005)10:3(321).
Chen, Z. W., Y. L. Xu, and X. M. Wang. 2012. “SHMS-based fatigue reliability analysis of multiloading suspension bridges.” J. Struct. Eng. 138 (3): 299–307. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000460.
Chou, K. C., J. H. Deatherage, T. D. Leatherwood, and A. J. Khayat. 1999. “Innovative method for evaluating overweight vehicle permits.” J. Bridge Eng. 4 (3): 221–227. https://doi.org/10.1061/(ASCE)1084-0702(1999)4:3(221).
Chung, H.-Y. 2004. “Fatigue reliability and optimal inspection strategies for steel bridges.” Ph.D. dissertation, Dept. of Civil Engineering, Univ. of Texas at Austin.
Cohen, H., G. Fu, W. Dekelbab, and F. Moses. 2003. “Predicting truck load spectra under weight limit changes and its application to steel bridge fatigue assessment.” J. Bridge Eng. 8 (5): 312–322. https://doi.org/10.1061/(ASCE)1084-0702(2003)8:5(312).
Connor, R. J., J. W. Fisher, I. C. Hodgson, and C. A. Bowman. 2004. Results of field monitoring prototype floorbeam connection retrofit details on the Birmingham Bridge. Bethlehem, PA: Lehigh Univ. Center for Advanced Technology for Large Structural Systems.
Correia, J. P. R. R., and F. A. B. Branco. 2006. “New methodology: Permit checking of vehicular overloads.” J. Bridge Eng. 11 (3): 274–281. https://doi.org/10.1061/(ASCE)1084-0702(2006)11:3(274).
D’Angelo, L., and A. Nussbaumer. 2015. “Reliability based fatigue assessment of existing motorway bridge.” Struct. Saf. 57: 35–42. https://doi.org/10.1016/j.strusafe.2015.07.001.
Deng, L., and C. S. Cai. 2010. “Development of dynamic impact factor for performance evaluation of existing multi-girder concrete bridges.” Eng. Struct. 32 (1): 21–31. https://doi.org/10.1016/j.engstruct.2009.08.013.
DOT (Department of Transportation). 2006. “Bridge formula weights.” Accessed March 1, 2017. https://ops.fhwa.dot.gov/freight/publications/brdg_frm_wghts/index.htm.
FHWA (Federal Highway Administration). 2001. “Traffic monitoring guide.” Accessed July 5, 2017. http://www.fhwa.dot.gov/ohim/tmguide/index.htm.
Fu, G., J. Feng, W. Dekelbab, F. Moses, H. Cohen, and D. Mertz. 2008. “Impact of commercial vehicle weight change on highway bridge infrastructure.” J. Bridge Eng. 13 (6): 556–564. https://doi.org/10.1061/(ASCE)1084-0702(2008)13:6(556).
Fu, G., and O. Hag-Elsafi. 2000. “Vehicular overloads: Load model, bridge safety, and permit checking.” J. Bridge Eng. 5 (1): 49–57. https://doi.org/10.1061/(ASCE)1084-0702(2000)5:1(49).
Ghosn, M. 2000. “Development of truck weight regulations using bridge reliability model.” J. Bridge Eng. 5 (4): 293–303. https://doi.org/10.1061/(ASCE)1084-0702(2000)5:4(293).
Ghosn, M., and F. Moses. 2000. “Effect of changing truck weight regulations on US bridge network.” J. Bridge Eng. 5 (4): 304–310. https://doi.org/10.1061/(ASCE)1084-0702(2000)5:4(304).
Guo, T., and Y. Chen. 2013. “Fatigue reliability analysis of steel bridge details based on field-monitored data and linear elastic fracture mechanics.” Struct. Infrastruct. Eng. 9 (5): 496–505. https://doi.org/10.1080/15732479.2011.568508.
Guo, T., D. M. Frangopol, and Y. Chen. 2012. “Fatigue reliability assessment of steel bridge details integrating weigh-in-motion data and probabilistic finite element analysis.” Comput. Struct. 112–113 (4): 245–257. https://doi.org/10.1016/j.compstruc.2012.09.002.
Haider, S. W., and R. S. Harichandran. 2007a. “Gross Vehicle weight distribution parameters for all truck class & vehicle class proportions of AADTT.” Accessed June 12, 2017. http://www.egr.msu.edu/∼harichan/papers/2007/axle-spectra.pdf.
Haider, S. W., and R. S. Harichandran. 2007b. “Relating axle load spectra to truck gross vehicle weights and volumes.” J. Transp. Eng. 133 (12): 696–705. https://doi.org/10.1061/(ASCE)0733-947X(2007)133:12(696).
Han, W., Y. Yuan, Q. Xie, X. Chen, and P. Huang. 2018. “Reliability-based truck weight regulation of small- to medium-span bridges.” J. Bridge Eng. 23 (1): 04017109. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001149.
Hodgson, I., R. Connor, H. Mahmoud, and C. Bowman. 2006. Approaches to the Fort Duquesne bridge retrofit of fatigue and fracture details—Field testing and fatigue evaluation. Bethlehem, PA: Lehigh Univ. Center for Advanced Technology for Large Structural Systems.
James, R. W., J. S. Noel, H. L. Furr, and F. E. Bonilla. 1986. “Proposed new truck weight limit formula.” J. Struct. Eng. 112 (7): 1589–1604. https://doi.org/10.1061/(ASCE)0733-9445(1986)112:7(1589).
Keating, P. B., and J. W. Fisher. 1986. Review of fatigue tests and design criteria on welded details. Bethlehem, PA: Lehigh Univ.
Kwigizile, V., M. F. Selekwa, and R. N. Mussa. 2004. “Highway vehicle classification by probabilistic neural networks.” In Proc., FLAIRS Conf., 664–669. Menlo Park, CA: AAAI Press.
Kwon, K., and D. M. Frangopol. 2010. “Bridge fatigue reliability assessment using probability density functions of equivalent stress range based on field monitoring data.” Int. J. Fatigue 32 (8): 1221–1232. https://doi.org/10.1016/j.ijfatigue.2010.01.002.
Leander, J., B. Norlin, and R. Karoumi. 2015. “Reliability-based calibration of fatigue safety factors for existing steel bridges.” J. Bridge Eng. 20 (10): 04014107. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000716.
Liu, M., D. M. Frangopol, and K. Kwon. 2010. “Fatigue reliability assessment of retrofitted steel bridges integrating monitored data.” Struct. Saf. 32 (1): 77–89. https://doi.org/10.1016/j.strusafe.2009.08.003.
Liu, Y., H. Zhang, Y. Liu, Y. Deng, N. Jiang, and N. Lu. 2017. “Fatigue reliability assessment for orthotropic steel deck details under traffic flow and temperature loading.” Eng. Fail. Anal. 71: 179–194. https://doi.org/10.1016/j.engfailanal.2016.11.007.
Lu, N., M. Noori, and Y. Liu. 2017. “Fatigue reliability assessment of welded steel bridge decks under stochastic truck loads via machine learning.” J. Bridge Eng. 22 (1): 04016105. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000982.
Luskin, D., and C. M. Walton. 2001. Effects of truck size and weights on highway infrastructure and operations: A synthesis report. Austin, TX: Texas Dept. of Transportation.
Miner, M. A. 1945. “Cumulative damage in fatigue.” J. Appl. Mech. 12 (3): 159–164.
Miranda, M., and G. Deodatis. 2012. “Generalized variability response functions for beam structures with stochastic parameters.” J. Eng. Mech. 138 (9): 1165–1185. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000421.
Moshiri, M., and J. Montufar. 2016. “Existing bridge formulas for truck-weight regulation from international jurisdictions and resulting load stresses on single-span bridges.” J. Transp. Eng. 142 (1): 04015038. https://doi.org/10.1061/(ASCE)TE.1943-5436.0000810.
Naess, A., and O. Gaidai. 2008. “Monte Carlo methods for estimating the extreme response of dynamical systems.” J. Eng. Mech. 134 (8): 628–636. https://doi.org/10.1061/(ASCE)0733-9399(2008)134:8(628).
Ni, Y., X. Ye, and J. Ko. 2010. “Monitoring-based fatigue reliability assessment of steel bridges: Analytical model and application.” J. Struct. Eng. 136 (12): 1563–1573. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000250.
Nowak, A. S., and Y. K. Hong. 1991. “Bridge live-load models.” J. Struct. Eng. 117 (9): 2757–2767. https://doi.org/10.1061/(ASCE)0733-9445(1991)117:9(2757).
Prozzi, J. A., and F. Hong. 2007. “Optimum statistical characterization of axle load spectra based on load-associated pavement damage.” Int. J. Pavement Eng. 8 (4): 323–330. https://doi.org/10.1080/10298430600949902.
Righiniotis, T. D. 2006. “Effects of increasing traffic loads on the fatigue reliability of a typical welded bridge detail.” Int. J. Fatigue 28 (8): 873–880. https://doi.org/10.1016/j.ijfatigue.2005.10.005.
Schilling, C. 1982. “Impact factors for fatigue design.” J. Struct. Div. 108 (ST-9): 2034–2044.
Schilling, C. 1984. “Stress cycles for fatigue design of steel bridges.” J. Struct. Eng. 110 (6): 1222–1234. https://doi.org/10.1061/(ASCE)0733-9445(1984)110:6(1222).
Schilling, C. G., K. H. Klippstein, J. M. Barsom, and G. T. Blake. 1978. Fatigue of welded steel bridge members under variable-amplitude loadings. Washington, DC: Transportation Research Board.
Soliman, M., M. F. Dan, and K. Kown. 2013. “Fatigue assessment and service life prediction of existing steel bridges by integrating SHM into a probabilistic bilinear S-N approach.” J. Struct. Eng. 139 (10): 1728–1740. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000584.
Tabsh, S. W., and M. Tabatabai. 2001. “Live load distribution in girder bridges subject to oversized trucks.” J. Bridge Eng. 6 (1): 9–16. https://doi.org/10.1061/(ASCE)1084-0702(2001)6:1(9).
Vigh, A., and L. P. Kollár. 2006. “Approximate analysis of bridges for the routing and permitting procedures of overweight vehicles.” J. Bridge Eng. 11 (3): 282–292. https://doi.org/10.1061/(ASCE)1084-0702(2006)11:3(282).
Vigh, A., and L. P. Kollár. 2007. “Routing and permitting techniques of overweight vehicles.” J. Bridge Eng. 12 (6): 774–784. https://doi.org/10.1061/(ASCE)1084-0702(2007)12:6(774).
Wang, C., L. Hao, and B. Fu. 2012. “Fatigue reliability updating evaluation of existing steel bridges.” J. Bridge Eng. 17 (6): 955–965. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000354.
Wu, J. 2012. “Fatigue assessment of slender long-span bridges: Reliability approach.” J. Bridge Eng. 17 (1): 47–57. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000232.
Wyatt, J. J., and M. U. Hassan. 1985. “Some tentative findings about the effect of level of enforcement on compliance with truck weight regulations.” In Proc., Canadian Transportation Research Forum, 20th Annual Meeting. Ottawa: Canadian Transportation Research Forum.
Zhang, W., and C. Cai. 2012. “Fatigue reliability assessment for existing bridges considering vehicle speed and road surface conditions.” J. Bridge Eng. 17 (3): 443–453. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000272.
Zhang, W., C. S. Cai, and F. Pan. 2013. “Fatigue reliability assessment for long-span bridges under combined dynamic loads from winds and vehicles.” J. Bridge Eng. 18 (8): 735–747. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000411.
Zhao, Z., A. Haldar, and F. L. Breen. 1994. “Fatigue-reliability updating through inspections of steel bridges.” J. Struct. Eng. 120 (5): 1624–1642. https://doi.org/10.1061/(ASCE)0733-9445(1994)120:5(1624).
Information & Authors
Information
Published In
Copyright
©2018 American Society of Civil Engineers.
History
Received: Jan 2, 2018
Accepted: Apr 13, 2018
Published online: Jul 6, 2018
Published in print: Nov 1, 2018
Discussion open until: Dec 6, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.