Prediction of Mean Droplet Size of a Spray Using a New Energy-Based Model Combined with a CFD Submodel
Publication: Journal of Aerospace Engineering
Volume 31, Issue 5
Abstract
In order to estimate mean droplet size of spray, a theoretical model using the energy conservation law was derived. In this approach, the loss of kinetic energy leads to the occurrence of atomization phenomenon. The derived formulation shows that the mean droplet size is inversely proportional to atomization efficiency and liquid Weber number. This model needs inputs that are provided using a computational fluid dynamics (CFD) submodel independent of the experimental data. To obtain a prediction of the mean droplet size, an estimation of the atomization efficiency and Weber number is mandatory. Thus, to estimate the atomization efficiency and Weber number, the CFD analysis was conducted for the fluid flow inside the injector considering environmental domain. Prediction of the proposed model has close agreement with available experimental data. Parametric investigation was also done to study the effects of some parameters on the mean droplet size. Consequently, the combined model can be applied as a time-saving and simple model to achieve a good prediction for the mean droplet size of spray.
Get full access to this article
View all available purchase options and get full access to this article.
References
Ashgriz, N. 2011. Handbook of atomization and sprays: Theory and applications. New York, NY: Springer.
Babinsky, E., and P. E. Sojka. 2002. “Modeling drop size distributions.” Prog. Energy Combust. Sci. 28 (4): 303–329. https://doi.org/10.1016/S0360-1285(02)00004-7.
Bordas, R., V. John, E. Schmeyer, and D. Thevenin. 2012. “Measurement and simulation of a droplet population in a turbulent flow field.” Comput. Fluids 66 (1): 52–62. https://doi.org/10.1016/j.compfluid.2012.05.003.
Chinn, J. J. 2000. “The internal flow and exit conditions of pressure swirl atomizers.” Atomization Spray 10 (2): 121–146. https://doi.org/10.1615/AtomizSpr.v10.i2.20.
Cooper, D., and A. J. Yule. 2001. “Waves on the air core/liquid interface of a pressure swirl atomizer.” In Proc., 17th ILASS-Europe, 105–115. Chicago, IL: International Congress on Liquid Atomization and Spray Systems.
Creismeas, P. 1995. “A Eulerian/Lagrangian model to calculate the evolution of a water droplet spray.” Int. J. Numer. Methods Fluids 20 (2): 135–155. https://doi.org/10.1002/fld.1650200204.
Eberhart, C., D. Lineberry, and M. Moser. 2009. “Experimental cold flow characterization of a swirl coaxial injector element.” In Proc., 45th AIAA/ASME/SAE/ASEE Propulsion Conf. and Exhibit, 5140–5152. Reston, VA: Aerospace Research Central.
Fritsching, U. 2004. Spray simulation: Modeling and numerical simulation of spray forming metals. London, UK: Cambridge University Press.
Grosshans, H., R. Z. Szasz, and L. Fuchs. 2015. “Enhanced liquid-gas mixing due to pulsating injection.” Comput. Fluids 107 (1): 196–204. https://doi.org/10.1016/j.compfluid.2014.11.009.
Hosseinalipour, S. M., and H. Karimaei. 2013. “Prediction of air core and injection angle of a swirl injector using 3D analysis.” In Proc., 2nd Gas Turbine, 25–33. Tehran, Iran: Iran Univ. of Science and Technology.
Hosseinalipour, S. M., H. Karimaei, and R. Ghorbani. 2013. “Study the Y-atomizer performance of a power plant in order to extract mean droplet diameter range.” In Proc., 2nd Gas Turbine, 100–108. Tehran, Iran: Iran Univ. of Science and Technology.
Hosseinalipour, S. M., H. Karimaei, and E. Movahednejad. 2016. “Droplets diameter distribution using maximum entropy formulation combined with a new energy-based sub-model.” Chin. J. Chem. Eng. 24 (11): 1625–1630. https://doi.org/10.1016/j.cjche.2016.03.004.
Hosseinalipour, S. M., H. Karimaei, and F. Ommi. 2014. “Numerical study the effect of mass flow rate on liquid sheet properties resulting from a swirl injector.” In Proc., 3rd Gas Turbine, 78–85. Tehran, Iran: Iran univ. of Science and Technology.
Lefebvre, A. H. 1989. Atomization and sprays. Washington, DC: Hemisphere Publishing.
Liu, H. 1999. Science and engineering of droplets: Fundamentals and applications, materials science and process technology. Salt Lake City, UT: William Andrew.
Movahednejad, E. 2010. “Prediction of size and velocity distribution of droplets in spray by maximum entropy principle and using wave instability.” Ph.D. dissertation, Tarbiat Modaress Univ.
Park, H., S. S. Yoon, and S. D. Heister. 2005. “A nonlinear atomization model for computation of drop size distributions and spray simulations.” Int. J. Numer. Methods Fluids 48 (11): 1219–1240. https://doi.org/10.1002/fld.972.
Reddy, R., and R. Banerjee. 2015. “GPU accelerated VOF based multiphase flow solver and its application to sprays.” Comput. Fluids 117 (1): 287–303. https://doi.org/10.1016/j.compfluid.2015.05.013.
White, F. M. 1991. Viscous fluid flow. New York, NY: McGraw-Hill.
Yoon, S. S., and P. E. DesJardin. 2006. “Modelling spray impingement using linear stability theories for droplet shattering.” Int. J. Numer. Methods Fluids 50 (4): 469–489. https://doi.org/10.1002/fld.1069.
Information & Authors
Information
Published In
Copyright
©2018 American Society of Civil Engineers.
History
Received: Jun 27, 2017
Accepted: Mar 6, 2018
Published online: May 30, 2018
Published in print: Sep 1, 2018
Discussion open until: Oct 30, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.