Efficient Mesh Deformation Method Combined with the Moving Submesh Approach
Publication: Journal of Aerospace Engineering
Volume 30, Issue 6
Abstract
It is a challenging task to simulate the situation involving nonstationary motions, one crucial requirement of which is an efficient algorithm to realize the high-quality computational mesh deformation. The inverse distance weighting (IDW) method is a very simple mesh deformation method and the moving submesh approach (MSA) can improve the efficiency significantly. In this paper, by combining IDW with MSA, a new hybrid mesh deformation method (IDW-MSA) is proposed, which only depends on the point information of mesh and does not need to build large tables of mesh connectivity data. For the translation and rotation movements, the index parameter has different value ranges that affect mesh quality differently. The default settings of index parameter are 2.2 for translation and 6.0 for rotation, which have been shown to handle large deformations without difficulty. The results demonstrate the efficiency and robustness of this algorithm via four test cases. From the point of deformed mesh quality, it is comparable to the disk relaxation algorithm and radial basis functions (RBFs). The computational cost can be reduced by more than an order of magnitude compared with the RBFs-MSA and spring analogy approach. For these benefits, the new algorithm has the capacity for unsteady flow simulations involving boundary movements.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This work is supported by the National Natural Science Foundation of China (Grant No. 11602298) and Aeronautical Science Foundation of China (20145788006).
References
Anderson, W. K., Karman, S. L., and Burdyshaw, C. (2009). “Geometry parameterization method for multidisciplinary applications.” AIAA J., 47(6), 1568–1578.
Batina, J. T. (1990). “Unsteady Euler airfoil solutions using unstructured dynamic meshes.” AIAA J., 28(8), 1381–1388.
Blom, F. J. (2000). “Consideration on the spring analogy.” Int. J. Numer. Methods Fluids, 32(6), 647–668.
Burg, C. (2006). “Analytic study of 2D and 3D grid motion using modified Laplacian.” Int. J. Numer. Methods Fluids, 52(2), 163–197.
de Boer, A., van der Schoot, M. S., and Bijl, H. (2007). “Mesh deformation based on radial basis function interpolation.” Comput. Struct., 85(11), 784–795.
Degand, C., and Farhat, C. (2002). “A three-dimensional torsional spring analogy method for dynamic meshes.” Comput. Struct., 80(3), 305–316.
Ertveldt, J., Pintelon, R., and Vanlanduit, S. (2016). “Identification of unsteady aerodynamic forces from forced motion wind tunnel experiments.” AIAA J., 54(10), 3265–3273.
Fang, H., et al. (2017). “Efficient mesh deformation based on Cartesian background mesh.” Comput. Math. Appl., 73(1), 71–86.
Helenbrook, B. T. (2003). “Mesh deformation using the biharmonic operator.” Int. J. Numer. Methods Fluids, 56(7), 1007–1021.
Keskinen, J., Vuorinen, V., Kaario, O., and Larmi, M. (2016). “Influence of mesh deformation on the quality of large eddy simulations.” Int. J. Numer. Methods Fluids, 82(4), 171–197.
Knupp, P. M. (2003). “Algebraic mesh quality metrics for unstructured initial meshes.” Finite Elem. Anal. Des., 39(3), 217–241.
Lefrançois, E. (2008). “A simple mesh deformation technique for fluid-structure interaction based on a submesh approach.” Int. J. Numer. Methods Eng., 75(9), 1085–1101.
Liu, X., Qin, N., and Xia, H. (2006). “Fast dynamic grid deformation based on Delaunay graph mapping.” J. Comput. Phys., 211(2), 405–423.
Liu, Y., Guo, Z., and Liu, J. (2012). “RBFs-MSA hybrid method for mesh deformation.” Chin. J. Aeronaut., 25(4), 500–507.
Luke, E., Collins, E., and Blades, E. (2012). “A fast mesh deformation method using explicit interpolation.” J. Comput. Phys., 231(2), 586–601.
Maruyama, D., Bailly, D., and Carrier, G. (2014). “High quality mesh deformation using quaternions for orthogonality preservation.” AIAA J., 52(12), 2712–2729.
Masters, J. S., and Tatum, K. E. (2016). “Unstructured mesh manipulation in response to surface deformation.” AIAA J., 54(1), 331–342.
Masud, A., Bhanabhagvanwala, M., and Khurram, R. A. (2007). “An adaptive mesh rezoning scheme for moving boundary flows and fluid-structure interaction.” Comput. Fluids, 36(1), 77–91.
Rendall, T. C. S., and Allen, C. B. (2009). “Efficient mesh motion using radial basis functions with data reduction algorithms.” J. Comput. Phys., 228(17), 6231–6249.
Rendall, T. C. S., and Allen, C. B. (2010). “Reduced surface point selection options for efficient mesh deformation using radial basis functions.” J. Comput. Phys., 229(8), 2810–2820.
Sheng, C., and Allen, C. B. (2013). “Efficient mesh deformation using radial basis functions on unstructured meshes.” AIAA J., 51(3), 707–720.
Stein, K., Tezduyar, T., and Benney, R. (2003). “Mesh moving techniques for fluid-structure interactions with large displacements.” J. Appl. Mech., 70(1), 58–63.
Stein, K., Tezduyar, T., and Benney, R. (2004). “Automatic mesh update with the solid-extension mesh moving technique.” Comput. Method Appl. Mech. Eng., 193(21), 2019–2032.
Wang, G., Mian, H. H., Ye, Z., and Lee, J. (2015). “Improved point selection method for hybrid-unstructured mesh deformation using radial basis functions.” AIAA J., 53(4), 1016–1025.
Witteveen, J. A. S. (2010). “Explicit and robust inverse distance weighting mesh deformation for CFD.” 48th AIAA Aerospace Science Meeting Including the New Horizon Forum and Aerospace Explosion, AIAA 2010-165, American Institute of Aeronautics and Astronautics, Orlando, FL.
Witteveen, J. A. S., and Bijl, H. (2009). “Explicit mesh deformation using inverse distance weighting interpolation.” 19th AIAA Computational Fluid Dynamics, AIAA 2009-3996, American Institute of Aeronautics and Astronautics, San Antonio.
Yang, L., Li, B., Lv, Z., Hou, W., and Hu, P. (2016). “Finite element mesh deformation with the skeleton-section template.” Comput. Aided Des., 73, 11–25.
Zeng, D., and Ethier, C. R. (2005). “A semi-torsional spring analogy model for updating unstructured meshes in 3D moving domains.” Finite Elem. Anal. Des., 41(11), 1118–1139.
Zhou, X., and Li, S. (2013). “A new mesh deformation method based on disk relaxation algorithm with pre-displacement and post-smoothing.” J. Comput. Phys., 235, 199–215.
Zhou, X., and Li, S. (2015). “A novel three-dimensional mesh deformation method based on sphere relaxation.” J. Comput. Phys., 298, 320–336.
Information & Authors
Information
Published In
Copyright
© 2017 American Society of Civil Engineers.
History
Received: Nov 22, 2016
Accepted: May 4, 2017
Published online: Aug 4, 2017
Published in print: Nov 1, 2017
Discussion open until: Jan 4, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.