Numerical Investigation of Sweep Angle Effect on the Supersonic Flows through Corners
Publication: Journal of Aerospace Engineering
Volume 30, Issue 4
Abstract
This research intends to characterize numerically the impact of sweep angle on the supersonic sharp corner flows. For this purpose, the effect of sweep angle on the variations of flow parameters such as shear stress, temperature, and pressure on the corner surface and also on the shock structure is examined. To ensure the accuracy of current numerical model, validation is performed with previous researches and reasonable agreements are observed. Results indicate that the inclusion of sweep angle has a significant effect on the Mach reflection strength and thus on the flow parameters’ variations on the corner surface. It is found that the role of sweep angle in changing the flow parameters’ variations in the zones near the trailing edge is of less significance than those that are close to the leading edge. It is shown that the inclusion of sweep angle has a little effect on the separation zone size although it tends to increase slightly the separation region length along the wing span at the trailing edge. Results demonstrate that the increase in sweep angle causes the shock structure and thus the Mach stem to become closer to the wing geometry. It is also seen that an increase in sweep angle leads to an increase in the Mach stem length.
Get full access to this article
View all available purchase options and get full access to this article.
References
Fluent version 6.3.26 [Computer software]. Fluent, Inc., Lebanon, NH.
Gambit version 2.4 [Computer software]. Fluent, Inc., Lebanon, NH.
Ben-Dor, G. (1991). Shock wave reflection phenomena, Springer, New York.
Charwat, A. F., and Redekopp, L. G. (1967). “Supersonic interference flow along the corner of intersecting wedges.” AIAA J., 5(3), 480–488.
Eagle, W. E., and Driscoll, J. F. (2011). “Experimental investigation of corner flows in rectangular supersonic inlets with 3D shock-boundary layer effects.” 49th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition, American Institute of Aeronautics and Astronautics, Reston, VA.
Gun’ko, Yu. P., Kudryavtsev, A. N., and Rakhimov, R. D. (2004). “Supersonic inviscid corner flows with regular and irregular shock interaction.” Fluid. Dyn., 39(2), 304–318.
Hornung, H. G. (1986). “Regular and Mach reflection of shock waves.” Annu. Rev. Fluid. Mech., 18(1), 33–58.
Hung, C. M., and Kurasaki, S. (1980). “Thin-layer approximation for three-dimensional supersonic corner flows.” AIAA J., 18(12), 1544–1546.
Korkegi, R. H. (1971). “Survey of viscous interactions associated with high Mach number flight.” AIAA J., 9(5), 771–784.
Kutler, P. (1974). “Supersonic flow in the corner formed by two intersecting wedges.” AIAA J., 12(5), 577–578.
Leger, T., Bisek, N., and Poggie, J. (2015). “Supersonic corner flow predictions using the quadratic constitutive relation.” 22nd AIAA Computational Fluid Dynamics Conf., American Institute of Aeronautics and Astronautics, Reston, VA.
Marconi, F. (1980). “Supersonic, inviscid, conical corner flowfields.” AIAA J., 18(1), 78–84.
Martin, J. A. (1985). “Shock fitting solution of the supersonic flow field in a rounded internal corner.” AIAA J., 23(2), 193–200.
Morajkar, R. R., Driscoll, J. F., and Gamba, M. (2015). “Experimental study of supersonic turbulent corner flow evolution in a low aspect ratio rectangular channel.” 53rd AIAA Aerospace Sciences Meeting, American Institute of Aeronautics and Astronautics, Reston, VA.
Morajkar, R. R., and Gamba, M. (2016). “Turbulence characteristics of supersonic corner flows in a low aspect ratio rectangular channel.” 54th AIAA Aerospace Sciences Meeting, American Institute of Aeronautics and Astronautics, Reston, VA.
Naidoo, P. (2011). “Supersonic and transonic viscous corner flows.” Ph.D. thesis, Univ. of the Witwatersrand, Johannesburg, South Africa.
Naidoo, P., and Skews, B. W. (2012). “Supersonic viscous corner flows.” P. I. Mech. Eng. G-J. Aer., 226(8), 950–965.
Schmidt, O. T., and Rist, U. (2011). “Viscous and inviscid instabilities of supersonic flow in a streamwise corner.” 6th AIAA Theoretical Fluid Mechanics Conf., American Institute of Aeronautics and Astronautics, Reston, VA.
Settles, G. S., Perkins, J. J., and Bogdonoff, S. M. (1980). “Investigation of three dimensional shock/boundary layer interactions at swept compression corners.” AIAA J., 18(7), 779–785.
Settles, G. S., and Teng, H. Y. (1982). “Flow visualization methods for separated three dimensional shock wave/turbulent boundary layer interactions.” AIAA J., 21(3), 390–397.
Shang, J. S., Hankey, W. L., and Petty, J. S. (1979). “Three-dimensional supersonic interacting turbulent flow along a corner.” AIAA J., 17(7), 706–713.
Shankar Anderson, V., and Kutler, D. P. (1975). “Numerical solutions for supersonic corner flow.” J. Comput. Phys., 17(3), 246–275.
Skews, B. W., Mills, J. G., Quinn, P., Menon, N., and Mohan, J. A. (2005). “Supersonic corner flow with fillets, camber, sweep and dihedral.” ISSW 25, Symp. Proc., Society for Shock Wave Research, Bangalore, India.
Wallace, J., and Clarke, J. H. (1963). “Uniformly valid second-order solution for supersonic flow over cruciform surfaces.” AIAA J., 1(1), 179–185.
Watson, R. D., and Weinstein, L. M. (1971). “A study of hypersonic corner flow interactions.” AIAA J., 9(7), 1280–1286.
West, J. E., and Korkegi, R. H. (1972). “Supersonic interaction in the corner of intersecting wedges at high Reynolds numbers.” AIAA J., 10(5), 652–656.
Information & Authors
Information
Published In
Copyright
©2017 American Society of Civil Engineers.
History
Received: Dec 31, 2014
Accepted: Oct 12, 2016
Published ahead of print: Jan 29, 2017
Published online: Jan 30, 2017
Discussion open until: Jun 30, 2017
Published in print: Jul 1, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.