Nonlinear Dynamic Modeling for a Flexible Laminated Composite Appendage Attached to a Spacecraft Body Undergoing Deployment and Locking Motions
Publication: Journal of Aerospace Engineering
Volume 29, Issue 5
Abstract
A nonlinear dynamic modeling method is developed for a deployment and locking mechanism composed of laminated composite appendage. Unlike most formulations of linear models which ignore coupled and nonlinear terms resulting in a seriously improper response, the present model takes into account the effects of geometric nonlinearity and coupled deformations. In order to accurately obtain the dynamic response of laminated composited appendages, nonlinear strain-displacement relations for laminated plate/shell elements are presented, and the corresponding formulations are derived from the Piola–Kirchhoff stress tensor for evaluating the internal forces. Furthermore, the effect of contact and impact located at a spring hinge is investigated, which can achieve the actuating and locking functions. To study the dynamic behavior of contact-impact, the generalized contact-impact forces between the pin and locking groove are considered in the model. Meanwhile, the Jacobian matrices of geometric and momentum constraints are derived from hinge kinematics. Finally, the complete expressions including coupled deformation terms, nonlinear stiffness, additional stiffness terms, and contact-impact forces are presented, and a full analysis is achieved by using both the linear model and nonlinear model, respectively. Numerical simulation results are obtained to verify the dynamic effects of coupled deformation terms, the nonlinear stiffness and additional stiffness terms in the present model.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This material is based on Project 2013CB733000 supported by the National Basic Research Program of China, Project 51575126 supported by the National Natural Science Foundation of China, and Projects 2013M541358 and 2015T80358 supported by the China Postdoctoral Science Foundation.
References
Abe, A., Kobayashi, Y., and Yamada, G. (2000). “Non-linear vibration characteristics of clamped laminated shallow shells.” J. Sound Vib., 234(3), 405–426.
Abe, A., Kobayashi, Y., and Yamada, G. (2007). “Nonlinear dynamic behaviors of clamped laminated shallow shells with one-to-one internal resonance.” J. Sound Vib., 304(3-5), 957–968.
Anantharaman, M. (1987). “The dynamic analysis of flexible mechanisms using finite element methods.” Ph.D. dissertation, Univ. of Stuttgart, Stuttgart, Germany.
Barut, A., Madenci, E., and Tessler, A. (1996). “Nonlinear elastic deformations of moderately thick laminated shells subjected to large and rapid rigid-body motion.” Finite Elem. Anal. Des., 22(1), 41–57.
Baz, A., and Ro, J. (2001). “Vibration control of rotating beams with active constrained layer damping.” Smart Mater. Struct., 10(1), 112–120.
Chandiramani, N. K., Librescu, L., and Shete, C. D. (2002). “On the free-vibration of rotating composite beams using a higher-order shear formulation.” Aerosp. Sci. Technol., 6(8), 545–561.
Chandiramani, N. K., Shete, C. D., and Librescu, L. (2003). “Vibration of higher-order-shearable pretwisted rotating composite blades.” Int. J. Mech. Sci., 45(12), 2017–2041.
Chen, S. L., Tan, K. K., and Huang, S. (2012). “Identification of coulomb friction-impeded systems with a triple-relay feedback apparatus.” IEEE T. Contr. Syst. T., 20(3), 726–737.
Du, H., Lim, M. K., and Liew, K. M. (1996). “Non-linear dynamics of multibodies with composite laminates. I: Theoretical formulation.” Comput. Method. Appl. M., 133(1-2), 15–24.
Fung, E. H. K., and Yau, D. T. W. (2004). “Vibration characteristics of a rotating flexible arm with ACLD treatment.” J. Sound Vib., 269(1-2), 165–182.
Fung, E. H. K., Zou, J. Q., and Lee, H. W. J. (2004a). “Lagrangian formulation of rotating beam with active constrained layer damping in time domain analysis.” J. Mech. Des., 126(2), 359–364.
Guo, X. Y., Zhang, W., and Yao, M. H. (2010). “Nonlinear dynamics of angle-ply composite laminated thin plate with third-order shear deformation.” Sci. China Technol. Sci., 53(3), 612–622.
Harras, B., Benamar, R., and White, R. G. (2002). “Geometrically nonlinear free vibration of fully clamped symmetrically laminated rectangular composite plates.” J. Sound Vib., 251(4), 579–619.
Knupp, P., Margolin, L., and Shashkov, M. (2002). “Reference Jacobian optimization-based rezone strategies for arbitrary Lagrangian Eulerian methods.” J. Comput. Phys., 176(1), 93–128.
Kremer, J. M., Shabana, A. A., and Widera, G. E. O. (1993a). “Large reference displacement analysis of composite plates. Part I: Finite element formulation.” Int. J. Numer. Meth. Eng., 36(1), 1–16.
Kremer, J. M., Shabana, A. A., and Widera, G. E. O. (1993b). “Large reference displacement analysis of composite plates. Part II: Computer implementation.” Int. J. Numer. Meth. Eng., 36(1), 17–42.
Lankarani, H. M., and Nikravesh, P. E. (1990). “A contact force model with hysteresis damping for impact analysis of multibody systems.” J. Mech. Des., 112(3), 369–376.
Lin, C. Y., and Chen, L. W. (2003). “Dynamic stability of a rotating beam with a constrained damping layer.” J. Sound Vib., 267(2), 209–225.
Liu, J. Y., and Hong, J. Z. (2002). “Dynamic modeling and modal truncation approach for a high-speed rotating elastic beam.” Arch. Appl. Mech., 72(8), 554–563.
Liu, J. Y., and Hong, J. Z. (2003). “Geometric stiffening of flexible link system with large overall motion.” Comput. Struct., 81(32), 2829–2841.
Liu, J. Y., and Hong, J. Z. (2004). “Dynamics of three-dimensional beams undergoing large overall motion.” Eur. J. Mech. A-Solid, 23(6), 1051–1068.
Madenci, E., and Barut, A. (1996). “Dynamic response of thin composite shells experiencing nonlinear elastic deformations coupled with large and rapid overall motions.” Int. J. Numer. Meth. Eng., 39(16), 2695–2723.
Meirovitch, L. (1987). “Equations of motion for maneuvering flexible spacecraft.” J. Guid. Control Dyn., 10(5), 453–465.
Meirovitch, L., and Kwak, M. K. (1989). “State equations for a spacecraft with maneuvering flexible appendages in terms of quasi-coordinates.” Appl. Mech. Rev., 42(11), S161–170.
Messina, A., and Soldatos, K. P. (2002). “A general vibration model of angle-ply laminated plates that accounts for the continuity of interlaminar stresses.” Int. J. Solids Struct., 39(3), 617–635.
Modi, V. J. (1974). “Attitude dynamics of satellite with flexible appendages—A brief review.” J. Spacecr. Rockets, 11(11), 743–751.
Neto, M. A., Ambrosio, J. A. C., and Leal, R. P. (2004). “Flexible multibody systems models using composite materials components.” Multibody Syst. Dyn., 12(4), 385–405.
Neto, M. A., Ambrosio, J. A. C., and Leal, R. P. (2006). “Composite materials in flexible multibody systems.” Comput. Meth. Appl. M., 195(50-51), 6860–6873.
Topal, U., and Uzman, Ü. (2010). “Effect of rectangular/circular cutouts on thermal buckling load optimization of angle-ply laminated thin plates.” Sci. Eng. Compos. Mater., 17(2), 93–110.
You, B. D., Zhao, Z. G., and Zhao, Y. (2010). “Disturbance analysis and suppression of flexible antenna reflector on free-floating satellite antenna.” Acta Aeronaut. Astronaut. Sinica, 31(12), 2348–2356.
Zhang, W. (2001). “Global and chaotic dynamics for a parametrically excited thin plate.” J. Sound Vib., 239(5), 1013–1036.
Information & Authors
Information
Published In
Journal of Aerospace Engineering
Volume 29 • Issue 5 • September 2016
Copyright
© 2016 American Society of Civil Engineers.
History
Received: Apr 1, 2015
Accepted: Sep 1, 2015
Published online: Mar 2, 2016
Discussion open until: Aug 2, 2016
Published in print: Sep 1, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.