Semiempirical Thrust Model of Dielectric Barrier Plasma Actuator for Flow Control
Publication: Journal of Aerospace Engineering
Volume 28, Issue 1
Abstract
Asymmetric dielectric barrier discharge plasma generating a wall-bounded jet without mechanical moving parts was studied as a flow control device. A reliable model providing thrust value of the plasma actuator is difficult to develop without incurring a heavy calculation cost attributable to its unsteady characteristic and asymmetric electric field distribution. In this paper, a new semiempirical thrust prediction model was developed based on the one-dimensional electrohydrodynamic effect. It is implemented in a computational fluid dynamics solver as a body force term. We determined that the thrust of the plasma actuator is proportional to the energy consumed in the actuator, which is regarded as a capacitor in the alternating current (AC) circuit. An analytic estimation of the capacitance of the actuator is performed, and the sensitive design parameters dielectric constant, thickness and the upper electrode thickness are considered in the capacitance value. The thrust value from the model is inserted as a body force term in a Navier-Stokes equation solver and the body-force region is specified by the extent of the region of the discharged plasma. Grid dependence of the model is verified and the velocity profile changed by the actuator is compared with previous reference experiment data to validate it. Thus, the authors conclude that the developed model can provide the proper thrust value and a two-dimensional velocity profile without incurring a heavy calculation cost.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This work was supported by the Brain Korea 21 Project in 2013.
References
Aholt, J. R. (2011). “Computational investigation of plasma actuator as an active flow control strategy of laminar separation bubbles.” M.S. thesis, Missouri Univ. of Science and Technology, Rolla, MO.
Bernard, N., Jolibois, J., Forte, M., Touchard, G., and Moreau, E. (2007). “Control of an axisymmetric subsonic air jet by plasma actuator.” Exp. Fluids, 43(4), 603–616.
Boesch, G., Vo, H. D., Savard, B., Wanko-Tchatchoaung, C., and Mureithi, N. W. (2010). “Flight control using wing-tip plasma actuation.” J. Aircr., 47(6), 1836–1846.
Bouchmal, A. (2011). “Modeling of dielectric-barrier discharge actuator.” M.S. thesis, Delft Univ. of Technology, Delft, Netherlands.
Chen, F. F. (1984). “Introduction to plasma physics and controlled fusion.” Vol. 1: Plasma physics, 2nd Ed., Plenum, New York, 8–11.
Corke, T. C., Enloe, C. L., and Wilkinson, S. P. (2010). “Dielectric barrier discharge plasma actuators for flow control.” Annu. Rev. Fluid Mech., 42(1), 505–529.
Dong, B., Bauchire, J. M., Pouvesle, J. M., and Hong, D. (2008). “Experimental study of a DBD surface discharge for the active control of subsonic airflow.” J. Phys. D Appl. Phys., 41(15), 155201.
Durscher, R., and Roy, S. (2012a). “Evaluation of thrust measurement techniques for dielectric barrier discharge actuators.” Exp. Fluids, 53(4), 1165–1176.
Durscher, R., and Roy, S. (2012b). “Three-dimensional flow measurements induced from serpentine plasma actuators in quiescent air.” J. Phys. D: Appl. Phys., 45(3), 035202.
Enloe, C. L., et al. (2004). “Mechanisms and responses of a single dielectric barrier plasma actuator: Geometric effects.” AIAA J., 42(3), 595–604.
FLUENT version 13.0.0 [Computer software]. ANSYS, Canonsburg, PA.
Giepman, R. H. M. (2011). “On transition delay with plasma actuators.” M.S. thesis, Delft Univ. of Technology, Delft, Netherlands.
Hoskinson, A. R., and Hershkowitz, N. (2011). “Modeling of dielectric barrier discharge plasma actuators with thick electrodes.” J. Phys. D: Appl. Phys., 44(8), 085202.
Hoskinson, A. R., Hershkowitz, N., and Ashpis, D. E. (2008). “Force measurements of single and double barrier DBD plasma actuators in quiescent air.” J. Phys. D: Appl. Phys., 41(24), 245209.
Jayaraman, B., Cho, Y.-C., and Shyy, W. (2008). “Modeling of dielectric barrier discharge plasma actuator.” J. Phys. D: Appl. Phys., 103(15), 053304.
Kogelschatz, U., Eliasson, B., and Egli, W. (1997). “Dielectric-barrier discharges. Principle and applications.” J. Phys. IV, 7(C4), 47–66.
Krall, N. A., and Trivelpiece, A. W. (1986). Principles of plasma physics, Vol. 4, San Francisco Press, San Francisco, 72–73.
Mertz, B. E., and Corke, T. C. (2011). “Single-dielectric barrier discharge plasma actuator modeling and validation.” J. Fluid Mech., 669, 557–583.
Nikandrov, D. S., and Tsendin, L. D. (2005). “Low-frequency dielectric-barrier discharge in the townsend mode.” Tech. Phys., 50(10), 1284–1294.
Orlov, D. M., Corke, T. C., and Patel, M. P. (2006). “Electric circuit model for aerodynamic plasma actuator.” 44th AIAA Aerospace Sciences Meeting and Exhibit, AIAA, Reno, NV, 1206.
Patel, M. P., et al. (2008). “Scaling effects of an aerodynamic plasma actuator.” J. Aircr., 45(1), 223–236.
Patel, M. P., Terry Ng, T., Vasudevan, S., Corke, T. C., and He, C. (2007). “Plasma actuators for hingeless aerodynamic control of an unmanned air vehicle.” J. Aircr., 44(4), 1264–1274.
Post, M. L., and Corke, T. C. (2006). “Separation control using plasma actuators: Dynamic stall vortex control on oscillating airfoil.” AIAA J., 44(12), 3125–3135.
Roth, J. R. (2003). “Aerodynamic flow acceleration using paraelectric and peristaltic electrohydrodynamic effects of a one atmosphere uniform glow discharge plasma.” Phys. Plasmas, 10(5), 2117–2126.
Roy, S., and Wang, C.-C. (2009). “Bulk flow modification with horseshoe and serpentine plasma actuators.” J. Phys. D: Appl. Phys., 42(3), 032004.
Shyy, W., Jayaraman, B., and Andersson, A. (2002). “Modeling of glow discharge-induced fluid dynamics.” J. Appl. Phys., 92(11), 6434–6443.
Soloviev, V. R. (2012). “Analytical estimation of the thrust generated by a surface dielectric barrier discharge.” J. Phys. D: Appl. Phys., 45(2), 025205.
Thomas, F. O., Corke, T. C., Iqbal, M., Kozlov, A., and Schatzman, D. (2009). “Optimization of dielectric barrier discharge plasma actuators for active aerodynamic flow control.” AIAA J., 47(9), 2169–2178.
West, T. K., IV (2012). “Numerical investigation of plasma actuator configuration for flow separation control at multiple angles of attack.” M.S. thesis, Missouri Univ. of Science and Technology, Rolla, MO.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Dec 26, 2012
Accepted: May 24, 2013
Published online: May 27, 2013
Discussion open until: Oct 28, 2014
Published in print: Jan 1, 2015
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.