Technical Papers
Sep 1, 2012

Form-Finding Analysis and Active Shape Adjustment of Cable Net Reflectors with PZT Actuators

Publication: Journal of Aerospace Engineering
Volume 27, Issue 3

Abstract

High-precision cable net reflectors are widely required for future communications and observations. Concerning the improvement of their surface accuracy, the active cable structure constructed by incorporating a piezoelectric (PZT) actuator into flexible cables has been proposed to achieve active shape control or active correction of the reflector surface. Two design stages of the cable net reflector with active cables, the form-finding analysis and active shape adjustment, are investigated. The form-finding analysis is derived from nodal force equilibrium equations by the minimum norm method-solving linear equations. An active shape adjustment method with the aid of active cables is then proposed to find the actuation voltages of PZT actuators for the prescribed shape. The adjustment method is divided into three parts: a finite-element model of the active cable net reflector, an active adjustment optimal model, and its solving method using the multidimensional advance-retreat algorithm. Finally, numerical examples of a parabolic cable net reflector are analyzed. Simulation results demonstrate that the proposed methods can warrant cable tension forces, which fall into a specified range, and the deformed cable net reflector surface can match the one designed by PZT actuators.

Get full access to this article

View all available purchase options and get full access to this article.

References

Al-Sumait, J. S., AL-Othman, A. K., and Sykulski, J. K. (2007). “Application of pattern search method to power system valve-point economic load dispatch.” Int. J. Electr. Power Energy Syst., 29(10), 720–730.
Chen, Q., et al. (2007). “Piezoelectric polymers actuators for precise shape control of large scale space antennas.” Proc., SPIE Smart Structures and Materials and Nondestructive Evaluation and Health Monitoring, 65241P, Society of Photo-optical Instrumentation Engineers, New York, 18–22.
Guyan, R. J. (1965). “Reduction of stiffness and mass matrices.” AIAA J., 3(2), 380.
Li, H., Zhao, G., Niu, S., and Luan, Y. (2006). “Inverse heat conduction analysis of quenching process using finite-element and optimization method.” Finite Elem. Anal. Des., 42(12), 1087–1096.
Li, J., Sedaghati, R., Dargahi, J., and Waechter, D. (2005). “Design and development of a new piezoelectric linear Inchworm actuator.” Mechatronics, 15(6), 651–681.
Li, T. J., Guo, J., and Cao, Y. Y. (2011). “Dynamic characteristics analysis of deployable space structures considering joint clearance.” Acta Astronaut., 68(7–8), 974–983.
Li, T. J., and Su, J. G. (2011). “Electrical properties analysis of wire mesh for mesh reflectors.” Acta Astronaut., 69(1–2), 109–117.
Li, T. J., and Wang, Y. (2009). “Performance relationships between ground model and space prototype of deployable space antennas.” Acta Astronaut., 65(9–10), 1383–1392.
Li, T. J., Zhou, M. H., and Duan, B. Y. (2008). “A method of form-finding analysis for flexible cable net structures of deployable antennas.” J. Astronautics, 29(3), 794–798 (in Chinese).
Lin, J. K., Knoll, C. F., and Willey, C. E. (2006). “Shape memory rigidizable inflatable structures for large space systems applications.” Proc., 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conf., American Institute of Aeronautics and Astronautics, Reston, VA, 1–4.
Meguro, A., Shintate, K., Usui, M., and Tsujihata, A. (2009). “In-orbit deployment characteristics of large deployable antenna reflector onboard Engineering Test Satellite VIII.” Acta Astronaut., 65(9–10), 1306–1316.
Reddy, J. N. (2004). An introduction to nonlinear finite element analysis, Oxford University Press, Oxford, U.K.
Tabata, M., and Natori, M. C. (1996). “Active shape control of a deployable space antenna reflector.” J. Intell. Mater. Syst. Struct., 7(2), 235–240.
Tabata, M., Yamamoto, K., Inoue, T., Noda, T., and Miura, K. (1992). “Shape adjustment of a flexible space antenna reflector.” J. Intell. Mater. Syst. Struct., 3(4), 646–658.
Tanaka, H. (2006). “Design optimization studies for large-scale contoured beam deployable satellite antennas.” Acta Astronaut., 58(9), 443–451.
Tanaka, H. (2011). “Surface error estimation and correction of a space antenna based on antenna gain analyses.” Acta Astronaut., 68(7–8), 1062–1069.
Tanaka, H., and Natori, M. C. (2004). “Shape control of space antennas consisting of cable networks.” Acta Astronaut., 55(3–9), 519–527.
Tanaka, H., and Natori, M. C. (2006). “Shape control of cable net structures based on concept of self-equilibrated stresses.” JSME Int J., Ser. C, 49(4), 1067–1072.
Tanaka, H., Shimozono, N., and Natori, M. C. (2008). ““A design method for cable network structures considering the flexibility of supporting structures.” Trans. Japan Soc. Aero. Space Sci., 50(170), 267–273.
Thomson, M. (2002). “Astromesh deployable reflectors for ku and ka band commercial satellites.” Proc., 20th AIAA Int. Communications Satellite Systems Conf. and Exhibit, American Institute of Aeronautics and Astronautics, Reston, VA, 2002–2032.
Thomson, M. W. (1997). “The AstroMesh deployable reflector.” Proc., 5th Int. Mobile Satellite Conf. (IMSC’97), IEEE, New York, 393–398.
Tibert, A. G. (2003). “Optimal design of tension truss antennas.” Proc., 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conf. and Exhibit, AIAA 2003-1629, American Institute of Aeronautics and Astronautics, Reston, VA, 1–10.
Tiersten, H. F. (1969). Linear piezoelectric plate vibration, Plenum, New York.
Yang, D. W. (2010). “Structure design and profile adjustment of large deployable mesh antenna for satellite.” Ph.D. thesis, Xidian Univ., Xi’an, China (in Chinese).

Information & Authors

Information

Published In

Go to Journal of Aerospace Engineering
Journal of Aerospace Engineering
Volume 27Issue 3May 2014
Pages: 575 - 586

History

Received: Feb 29, 2012
Accepted: Aug 29, 2012
Published online: Sep 1, 2012
Published in print: May 1, 2014

Permissions

Request permissions for this article.

Authors

Affiliations

Zuowei Wang [email protected]
Ph.D. Candidate, School of Electromechanical Engineering, Xidian Univ., P.O. Box 188, Xi’an 710071, China. E-mail: [email protected]
Professor, School of Electromechanical Engineering, Xidian Univ., P.O. Box 188, Xi’an 710071, China (corresponding author). E-mail: [email protected]
Hanqing Deng [email protected]
Ph.D. Candidate, School of Electromechanical Engineering, Xidian Univ., P.O. Box 188, Xi’an 710071, China. E-mail: [email protected]

Metrics & Citations

Metrics

Citations

Download citation

If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.

Cited by

View Options

Get Access

Access content

Please select your options to get access

Log in/Register Log in via your institution (Shibboleth)
ASCE Members: Please log in to see member pricing

Purchase

Save for later Information on ASCE Library Cards
ASCE Library Cards let you download journal articles, proceedings papers, and available book chapters across the entire ASCE Library platform. ASCE Library Cards remain active for 24 months or until all downloads are used. Note: This content will be debited as one download at time of checkout.

Terms of Use: ASCE Library Cards are for individual, personal use only. Reselling, republishing, or forwarding the materials to libraries or reading rooms is prohibited.
ASCE Library Card (5 downloads)
$105.00
Add to cart
ASCE Library Card (20 downloads)
$280.00
Add to cart
Buy Single Article
$35.00
Add to cart

Get Access

Access content

Please select your options to get access

Log in/Register Log in via your institution (Shibboleth)
ASCE Members: Please log in to see member pricing

Purchase

Save for later Information on ASCE Library Cards
ASCE Library Cards let you download journal articles, proceedings papers, and available book chapters across the entire ASCE Library platform. ASCE Library Cards remain active for 24 months or until all downloads are used. Note: This content will be debited as one download at time of checkout.

Terms of Use: ASCE Library Cards are for individual, personal use only. Reselling, republishing, or forwarding the materials to libraries or reading rooms is prohibited.
ASCE Library Card (5 downloads)
$105.00
Add to cart
ASCE Library Card (20 downloads)
$280.00
Add to cart
Buy Single Article
$35.00
Add to cart

Media

Figures

Other

Tables

Share

Share

Copy the content Link

Share with email

Email a colleague

Share