Planetary Regolith Delivery Systems for ISRU
Publication: Journal of Aerospace Engineering
Volume 26, Issue 1
Abstract
This paper describes tests conducted since 2008 at the National Aeronautics and Space Administration (NASA) Kennedy Space Center (KSC) to address engineering challenges associated with delivering planetary regolith to in situ resource utilization (ISRU) systems. The need to excavate regolith under reduced-gravity conditions on a planetary surface and then deliver it to systems for material analysis and/or processing constrains the possible engineering approaches that can be used in space. Mission costs may further limit the mass and available power of a regolith delivery system. Mechanical systems operating in a planetary environment require high reliability with respect to system service life because it is usually difficult or impossible to perform maintenance robotically on a planetary surface. The regolith delivery system for most ISRU systems must have a leak-tight interface between the near-vacuum found on a planetary surface and the pressurized atmosphere within the ISRU reactor. Depending on the mission, the amount of regolith that must be delivered may range from a few grams (e.g., for analysis) to tens of kilograms (e.g., for oxygen production). Hot, spent regolith from an ISRU reactor must eventually be returned to the planetary environment by means of an interface that is capable of operating and sealing over a potentially large temperature range. In this paper, we will describe pneumatic and auger methods of conveying large amounts of regolith that have been studied and demonstrated at NASA KSC and at ISRU field tests and discuss other regolith delivery systems that are being designed for future field tests.
Get full access to this article
View all available purchase options and get full access to this article.
References
Neish, C. D., et al. (2011). “The nature of lunar volatiles as revealed by MiniRF observations of the LCROSS impact site.” J. Geophys. Res., 116, E01005.
Pell, M., Dunson, J. B., and Knowlton, T. M. (2007). “Gas-solid operations and equipment.” Perry’s chemical engineers’ handbook, D. W. Green and R. Perry, eds., 8th Ed., McGraw Hill, New York.
Pieters, C. M., et al. (2009). “The Moon Mineralogy Mapper (M3) on Chandrayaan-1.” Curr. Sci., 96(4), 500–505.
Ruess, F., Schaenzlin, J., and Benaroya, H. (2006). “Structural design of a lunar habitat.” J. Aerosp. Eng., 19(3), 133–157.
Zhao, Y., and Shadman, F. (1993). “Production of oxygen from lunar ilmenite.” Resources of near earth space, University of Arizona Press, Tuscon, AZ, 149–178.
Zubrin, R., Jonscher, P., and Michael, S. (2009). “Counterflow regolith heat exchanger.” Final Rep. on NASA Contract NNX09CE75P, Pioneer Astronautics, Lakewood, CO.
Information & Authors
Information
Published In
Copyright
© 2013 American Society of Civil Engineers.
History
Received: May 21, 2012
Accepted: Jul 20, 2012
Published ahead of production: Jul 24, 2012
Published online: Jul 25, 2012
Published in print: Jan 1, 2013
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.