HALO: Interactive Equilibrium Approach in Designing Tensegrity Hollow-Rope Structures
Publication: Journal of Architectural Engineering
Volume 27, Issue 3
Abstract
Tensegrity is a stable self-equilibrated spatial structure composed of isolated members in compression inside contiguous tensioned components. The tensegrity hollow-rope modules can be implemented in the Architecture–Engineering–Construction (AEC) field, such as in the design of towers and bridges. Although some research is conducted based on tensegrity form-finding and structural analysis, finding the optimal form of these systems is a complicated task in terms of its geometrical complexity and nonlinear behavior. In this research, using a modified force density algorithm, a fully parametric approach is developed for tensegrity design and form-finding. It is developed as an innovative workflow for design exploration, performance evaluation, and structural optimization of the tensegrity hollow-rope systems. Then, by introducing an adaptive problem-solving algorithm, the correct functioning of the defined plugin for creating new and optimized tensegrity forms is investigated in several case studies. This method facilitates the initial design and form generation of hollow-rope tensegrity optimized nodal geometry in a fully parametric interface.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, Grasshopper models for parametric design, and Python code for the purpose of form-finding that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
This research received no specific grant from any funding agency in the public, commercial, or not-for-profit sectors.
References
Aboul-Nasr, G., and S. A. Mourad. 2015. “An extended force density method for form finding of constrained cable nets.” Case Stud. Struct. Eng. 3: 19–32. https://doi.org/10.1016/j.csse.2015.02.001.
Adriaenssens, S., P. Block, D. Veenendaal, and C. Williams. 2014. Shell structures for architecture: Form finding and optimization. London: Routledge.
Allen, E., and W. Zalewski. 1996. “Understanding famous structures through simple graphical analyses.” In Proc., 84th ACSA Annual Meeting: Building Technology Conf., 3–8. Canada: Association of Collegiate Schools of Architecture. https://www.acsa-arch.org/.
Block, P., and J. Ochsendorf. 2007. “Thrust network analysis: A new methodology for three-dimensional equilibrium.” J. Int. Assoc. Shell Spatial Struct. 155 (3): 167.
Charalambides, J., and K. Liapi. 2017. “Square-base double-layer tensegrity structures: Geometric relations for modular tensegrity assemblies.” J. Archit. Eng. 23 (3): 04017011. https://doi.org/10.1061/(ASCE)AE.1943-5568.0000265.
Descamps, B., and R. Filomeno Coelho. 2014. “The nominal force method for truss geometry and topology optimization incorporating stability considerations.” Int. J. Solids Struct. 51 (13): 2390–2399. https://doi.org/10.1016/j.ijsolstr.2014.03.003.
Dong, W., P. J. Stafford, and A. M. Ruiz-Teran. 2019. “Inverse form-finding for tensegrity structures.” Comput. Struct. 215: 27–42. https://doi.org/10.1016/j.compstruc.2019.01.009.
Erdine, E., and A. Kallegias. 2017. “Interwoven reinforced concrete structures: Integration of design and fabrication drivers through parametric design processes.” Des. Stud. 52: 198–220. https://doi.org/10.1016/j.destud.2017.06.002.
Gan, B. S., J. Zhang, D. K. Nguyen, and E. Nouchi. 2015. “Node-based genetic form-finding of irregular tensegrity structures.” Comput. Struct. 159: 61–73. https://doi.org/10.1016/j.compstruc.2015.07.003.
Gantes, C. J., J. J. Connor, R. D. Logcher, and Y. Rosenfeld. 1989. “Structural analysis and design of deployable structures.” Comput. Struct. 32 (3–4): 661–669. https://doi.org/10.1016/0045-7949(89)90354-4.
Hanaor, A. 1992. “Aspects of design of double-layer tensegrity domes.” Int. J. Space Struct. 7 (2): 101–113. https://doi.org/10.1177/026635119200700204.
Jurado-Piña, R., L. M. Gil-Martín, and E. Hernández-Montes. 2009. “Topological mesh for shell structures.” Appl. Math. Modell. 33 (2): 948–958. https://doi.org/10.1016/j.apm.2007.12.018.
Koohestani, K., and S. D. Guest. 2013. “A new approach to the analytical and numerical form-finding of tensegrity structures.” Int. J. Solids Struct. 50 (19): 2995–3007. https://doi.org/10.1016/j.ijsolstr.2013.05.014.
Lachauer, L., and P. Block. 2014. “Interactive equilibrium modelling.” Int. J. Space Struct. 29 (1): 25–37. https://doi.org/10.1260/0266-3511.29.1.25.
Lachauer, L., H. Jungjohann, and T. Kotnik. 2011. “Interactive parametric tools for structural design.” In Proc., Int. IABSE-IASS Symp., Taller, Longer, Lighter (full paper on CD). Madrid, Spain: International Association for Shell and Spatial Structures (IASS).
Miki, M., and K. N. I. Kawaguchi. 2010. “Extended force density method for form-finding of tension structures.” J. Int. Assoc. Shell Spatial Struct. 51 (166): 291–303.
Motro, R., B. Maurin, and C. Silvestri. 2006. “Tensegrity rings and the hollow rope.” In Proc., IASS Symp. 2006, New Olympics, New Shells and Spatial Structures, 470–471. Madrid, Spain: International Association for Shell and Spatial Structures (IASS).
Nguyen, A. D., J. Quirant, F. Cevaer, and J. F. Dubé. 2011. “Study and construction of a pentagon-based tensegrity ring.” Eur. J. Environ. Civ. Eng. 15 (6): 849–868. https://doi.org/10.1080/19648189.2011.9695277.
Nie, R., B. He, D. H. Hodges, and X. Ma. 2019. “Form finding and design optimization of cable network structures with flexible frames.” Comput. Struct. 220: 81–91. https://doi.org/10.1016/j.compstruc.2019.05.004.
Ohlbrock, P. O., P. D. Acunto, J. Jasienski, and C. Fivet. 2016. “Vector-based 3D graphic statics (Part III): Designing with combinatorial equilibrium modelling.” In Proc., IASS Annual Symp, 1–10. Madrid, Spain: International Association for Shell and Spatial Structures (IASS).
Ohsaki, M., and K. Hayashi. 2017. “Force density method for simultaneous optimization of geometry and topology of trusses.” Struct. Multidiscip. Optim. 56 (5): 1157–1168. https://doi.org/10.1007/s00158-017-1710-8.
Pagitz, M., and J. M. Mirats Tur. 2009. “Finite element based form-finding algorithm for tensegrity structures.” Int. J. Solids Struct. 46 (17): 3235–3240. https://doi.org/10.1016/j.ijsolstr.2009.04.018.
Peña, D. M., I. Llorens, and R. Sastre. 2010. “Application of the tensegrity principles on tensile textile constructions.” Int. J. Space Struct. 25 (1): 57–67. https://doi.org/10.1260/0266-3511.25.1.57.
Philipp, B., R. Wüchner, and K. U. Bletzinger. 2016. “Advances in the form-finding of structural membranes.” Procedia Eng. 155: 332–341. https://doi.org/10.1016/j.proeng.2016.08.036.
Rhode-Barbarigos, L., N. B. Hadj Ali, R. Motro, and I. F. C. Smith. 2010. “Designing tensegrity modules for pedestrian bridges.” Eng. Struct. 32 (4): 1158–1167. https://doi.org/10.1016/j.engstruct.2009.12.042.
Rippmann, M., L. Lachauer, and P. Block. 2012a. “RhinoVAULT—Designing funicular form with Rhino, computer software.” Accessed February 15, 2020. http://block.arch.ethz.ch/tools/rhinovault.
Rippmann, M., L. Lachauer, and P. Block. 2012b. “Interactive vault design.” Int. J. Space Struct. 27 (4): 219–230. https://doi.org/10.1260/0266-3511.27.4.219.
Schek, H. J. 1974. “The force density method for form finding and computation of general networks.” Comput. Methods Appl. Mech. Eng. 3 (1): 115–134. https://doi.org/10.1016/0045-7825(74)90045-0.
Ströbel, D., P. Singer, and J. Holl. 2016. “Analytical formfinding.” Int. J. Space Struct. 31 (1): 52–61. https://doi.org/10.1177/0266351116642076.
Tang, Y., and T. Li. 2017. “Equivalent-force density method as a shape-finding tool for cable-membrane structures.” Eng. Struct. 151: 11–19. https://doi.org/10.1016/j.engstruct.2017.08.010.
Van Mele, T., L. D. Laet, D. Veenendaal, M. Mollaert, and P. Block. 2013. “Shaping tension structures with actively bent linear elements.” Int. J. Space Struct. 28 (3–4): 127–136. https://doi.org/10.1260/0266-3511.28.3-4.127.
Veenendaal, D., and P. Block. 2012. “An overview and comparison of structural form finding methods for general networks.” Int. J. Solids Struct. 49 (26): 3741–3753. https://doi.org/10.1016/j.ijsolstr.2012.08.008.
Zargar, S. H., and M. Alaghmandan. 2019. “CORAL: Introducing a fully computational plug-in for stadium design and optimization; a case study of finding optimal spectators’ viewing angle.” Archit. Sci. Rev. 62 (2): 160–170. https://doi.org/10.1080/00038628.2018.1559133.
Zargar, S. H., J. Sadeghi, M. Hashemi, N. Motallebi, and A. Andaji Garmaroodi. 2020. “Introducing a new method to convert a 2D hand-drawn perspective to a 3D digital model.” Nexus Netw. J. 22: 291–307.
Zhang, J. Y., and M. Ohsaki. 2006. “Adaptive force density method for form-finding problem of tensegrity structures.” Int. J. Solids Struct. 43 (18–19): 5658–5673. https://doi.org/10.1016/j.ijsolstr.2005.10.011.
Information & Authors
Information
Published In
Journal of Architectural Engineering
Volume 27 • Issue 3 • September 2021
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Apr 21, 2020
Accepted: May 17, 2021
Published online: Jul 12, 2021
Published in print: Sep 1, 2021
Discussion open until: Dec 12, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Mohammad Moeini, Ali M. Memari, Hurricane-Induced Failure Mechanisms in Low-Rise Residential Buildings and Future Research Directions, Natural Hazards Review, 10.1061/NHREFO.NHENG-1544, 24, 2, (2023).
- Seyed Hossein Zargar, Jaleh Sadeghi, Nathan C. Brown, Agent-based modelling for early-stage optimization of spatial structures, International Journal of Architectural Computing, 10.1177/14780771221143493, 21, 1, (84-99), (2022).