Technical Analysis and Comparison of Formwork-Making Methods for Customized Prefabricated Buildings: 3D Printing and Conventional Methods
Publication: Journal of Architectural Engineering
Volume 26, Issue 2
Abstract
Three-dimensional (3D) printing technology is increasingly playing an essential role in the customization of prefabricated buildings. To demonstrate its high-quality, cost, and time-saving advantages, this paper first presents a technical analysis of prefabricated formwork-making using 3D printing. Then, we compare 3D printing to the two conventional methods of manual wood and computer numerical control (CNC) foam using a demonstration house with curved walls specially designed and constructed using these three formwork-making methods. We concluded from our comparison that the 3D-printed polymer-based formwork-making method performed best in accuracy and time, and generated greater cost-effectiveness than did the manual wood and CNC foam formwork-making methods for the mass production of customized prefabricated buildings. Lastly, this paper provides design guidelines for architects to help achieve the highest economic savings and efficiency in customized prefabricated formwork utilizing the 3D printing method.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors gratefully acknowledge the assistance of Gate Construction Materials Group and Nanjing Beilida New Material System Engineering Co., Ltd. who participated in the fabrication of the demonstration house and provided the formwork-making data.
References
ASTM. 2010. Standard terminology for additive manufacturing. ASTM F2792-10. West Conshohocken, PA: ASTM.
Buswell, R. A., R. C. Soar, A. G. F. Gibb, and A. Thorpe. 2007. “Freeformwork construction: Mega-scale rapid manufacturing for construction.” Autom. Constr. 16 (2): 224–231.
Carrillo, J., F. Riveros, and L. Llano. 2017. “Development and testing of a novel steel formwork for casting concrete slabs with different sizes.” Rev. Fac. Ing. 26: 51–59.
Creaform. 2019. “Technical specifications of HandyScan 3D.” Accessed August 6, 2019. https://www.creaform3d.com/en/metrology-solutions/portable-3d-scanner-handyscan-3d/technical-specifications.
DOE. 2018. “Solar Decathlon China.” Accessed October 1, 2018. https://www.solardecathlon.gov/international-china.html.
Ganar, A. S., and S. D. Patil. 2015. “Comparative analysis on cost and duration of MIVAN formwork building and Conventional Formwork building.” Int. J. Recent Innovation Trends Comput. Commun. 3 (12): 6472–6474.
Hack, N., and W. V. Lauer. 2014. “Mesh-mould: Robotically fabricated spatial meshes as reinforced concrete formwork.” Archit. Des. 84: 44–53.
Han, D., H. Zhang, W. Cui, and J. Huang. 2019. “Towards to a hybrid model-making method based on translations between physical and digital models—A case study of the freeform architectural design.” In Vol. 2 of Proc., 24th CAADRIA Conf., 561–570. Wellington, New Zealand: Victoria Univ. of Wellington.
Hendrixson, S. 2018a. “3D-printed tooling offers durability for precast concrete.” Accessed July 15, 2018 https://www.additivemanufacturing.media/articles/3d-printed-tooling-offers-durability-for-precast-concrete.
Hendrixson, S. 2018b. “Precast concrete, meet 3D printing.” Addit. Manuf. 7(3): 24–27.
Karke, S. M., and M. B. Kumathekar. 2014. “Comparison of the use of traditional and modern formwork systems.” In Civil engineering systems and sustainable innovations, edited by P. D. G. C. Mishra. 348–355. New Delhi, India: Excellent Publishing House.
Kim, K., K. Son, E.-D. Kim, and S. Kim. 2015. “Current trends and future directions of free-form building technology.” Archit. Sci. Rev. 58 (3): 230–243.
Lague, D., N. Brodu, and J. Leroux. 2013. “Accurate 3D comparison of complex topography with terrestrial laser scanner: Application to the Rangitikei canyon (N-Z).” J. Photogramm. Remote Sens. 82: 10–26.
Lee, G. 2008. “Construction issues of irregular-shaped buildings.” J. Archit. Inst. Korea 52 (4): 63–65.
Lee, H. J. 2008. “A study on the tectonic meaning of architectural skin by the introduction of digital technology, focus on project of Frank Gehry and Herzog & Meuron.” Master’s thesis, School of Architecture, SeJong Univ.
Mateus, L., and V. Ferreira. 2013. “3D digitization in architecture curriculum.” In Vol. 2 of Proc., 24th eCAADe Conf., 561–570. Wellington, New Zealand: Victoria Univ. of Wellington.
Palikhe, S., J. J. Kim, J. Lim, and S. Kim. 2018. “Systematic analysis of production errors and accuracy when using pin-bed formwork of free-form concrete panels.” KSCE J. Civ. Eng. 22 (9): 3196–3203.
Peters, B. 2014. “Additive formwork: 3D printed flexible formwork.” In Proc., 34th ACADIA Conf., 517–522. Los Angeles: ACADIA/Riverside Architectural Press.
Prajapati, R., J. Pitroda, and J. Bhavsar. 2014. “Plastic formwork: New era for construction sector.” In Proc., 29th National Conf. on: “Trends and Challenges of Civil Engineering in Today’s Transforming World”. Civil Engineering Department S.N.P.I.T. & R.C., Umrak.
Roschli, A. C., B. K. Post, P. C. Chesser, M. R. Sallas, L. J. Love, and K. T. Gaul. 2018. “Precast concrete molds fabricated with big area additive manufacturing.” In Proc., 29th Annual Int. Solid Freeform Fabrication Symp., 568–579. Austin, TX.
Ryu, H.-G., and S.-J. Kim. 2012. “Case study of concrete surface design and construction method for freeform building based on BIM-focused on tri-bowl.” J. Korea Inst. Build. Constr. 12 (3): 347–357.
Schipper, H. R., and P. Eigenraam. 2016. “Mapping double-curved surfaces for production of precast concrete shell elements.” Heron 61: 211–234.
Schwoon, O., B. Bicher, and J. Schlumpf. 2013. Sika concrete handbook. Zurich, Switzerland: Sika AG Pressed.
Trimble. 2014. “Trimble TX8 laser scanner datasheet.” Accessed October 10, 2018 http://www.geotronics.sk/wp-content/uploads/2014/12/Trimble-TX8-DS.pdf.
Verhaegh, R. W. A. 2010. “Free-forms in concrete fabric.” Master’s thesis, Dept. of the Built Environment, Eindhoven Univ. of Technology.
West, M., and R. Araya. 2009. “Fabric formwork for concrete structures and architecture.” In Proc., Int. Conf. on Textile Composites and Inflatable Structures, and Structural Membranes. Barcelona, Spain: CIMNE.
Yin, H., M. Qu, H. Zhang, and Y. Lim. 2018. “3D printing and buildings: A technology review and future outlook.” Technol. Cancer Res. Treat. 2 (1): 94–111.
Information & Authors
Information
Published In
Copyright
© 2020 American Society of Civil Engineers.
History
Received: Jul 1, 2019
Accepted: Sep 18, 2019
Published online: Mar 18, 2020
Published in print: Jun 1, 2020
Discussion open until: Aug 18, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.